Campania International Luberon FT-315 Operator's manual

FT
-
315 Luberon
Fountain
Professionalinstallationisrecommendedforthisfountain!Assemble your fountain onalevel surface usingcrushed stone,
gravel,orcement padasthe base.
R
evised
June29, 2017
PumpKitParts List
PK800 Pump (1)
#10 stopper
#7 drain stopper
30”length 1/2”non-kinkhose (1)**
2”length 5/8”clearvinyltubing (2)**
2”length of3/4"clearvinyltubing (1)**
2”pieceof1/2”CPVC pipe (1)**
Hose clamps(3)
2.8 oztubeofsilicone (1)
SpillerSpout (4)**
Wedges(3)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately130 gallonsof water.
Thisfountain usesalarger fountain cover but doesnot
cover the basin.
(FTNCOV-LG)
Compatible withRefill #10 Device and LEDkit
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPP800 - 800GPH Pump
16 FTcord length

FT
-
315 Luberon
Fountain
Professionalinstallationisrecommendedforthisfountain!Assemble your fountain onalevel surface usingcrushed stone,
gravel,orcement padasthe base.
R
evised
June29, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof3832 poundswithanapproximate 8squarefootfootprint.
FGB-2130(175lbs)
84”Lx84”Wx11.25”H
FT-315D(150lbs)
15”Lx15”Wx15.75”H
FT-315C (316lbs)
12”Lx12”Wx38”H
FT-277A(2lbs)
6.75”Wx1”H
1. Place thefiberglassbasinwhere thefountain is to beinstalled.
a. Be sure tocheckthateach part is leveland centered
duringthe assemblyofthisfountain.
2. Assemblethepumpkit
a. Connectthepreassembledtubingtothepumpbysliding
the3/4"clear tubing over thepumpoutlet.
i. Note: Donotusethepumpadapter forthis
fountain
b. Place thestopper aroundthepumpcordapproximately
3feetfromthepump.
3. Feedthepumpcordthrough theholeinthebasin(FT-290F)
andthechannel.
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Looselywrapcordsupinthecenter ofthebasin.
6. Place thepumpcover(FT-315D)over thepump, ensuringthat
it is centeredand level.
7. Position thecolumn(FT-315C) over thepumphouse(FT-
315D).
8. InserttheCPVCpipeconnectedtothetubing intothepipe
protruding out ofthebottomofthecolumn(FT-315C).
9. Center and levelthecolumn(FT-315C) on thepumphouse
(FT-315D).
10.Place siliconearound thestraight endofthe4spouts andtwist
eachonecarefullyintotheholesonwater feature (FT-290B).
a. Note:Be sure thespout is facingdowntowardthebasin
after theyare inserted.
11.Place thewater control disc(FT-277A)insideofthetopofthe
column(FT-315C).

FT
-
315 Luberon
Fountain
Professionalinstallationisrecommendedforthisfountain!Assemble your fountain onalevel surface usingcrushed stone,
gravel,orcement padasthe base.
R
evised
June29, 2017
FT-315A(118lbs)
24”Lx24”Wx11”H
FT-315DD (6lbs)
7”Lx2”Wx7”H
FT-315F(268lbs)
24.25”Lx24.25”Wx15.75”H
FT-315E(227lbs)
35.5”Lx9.5”Wx15.75”H
12.Center thecap(FT-315A)on topofthecolumn(FT-315C).
13.Insertthepumpcoverdoor(FT-315DD)intothepumpcover
(FT-315D).
14.Install themetalpluginto thesideofthebasin.
15.Position thecopingsabout6inchesfromthebasin.
16.Carefullypusheachpiece oneattimetowardthebasinand
into thenotchofthecoping startingwith the2straightcopings
(FT-315E).
17.Fit eachpiece to thecoping next to it.
18.LetSiliconedryfor24hoursbefore fillingthebasinwith
water.