Campania International Monteros FT-269 User manual

FT
-
269 MonterosFountain
Professionalinstallation isrecommended forthisfountain!
R
evised
April 19, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK800 pump (1)
#10 stopper(1)
#7 Drain stopperwith wing nut (2)
Approx.24”length of½”blacknon-kinktubing (1)**
Approx.2”length of¾”clearvinyltubing (1)**
Approx.2”length of5/8”clearvinyltubing (1)**
Approx.18”length of½”blacknon-kinktubing (1)
Wedges(6)
Hose clamps(4)*
*Hoseclamps maybe used asflow restrictors
**Tubing is preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately25 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Device and LEDkit
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PP800 - 800GPH Pump
16 FTcord length

FT
-
269 MonterosFountain
Professionalinstallation isrecommended for thisfountain!Assemble your fountain on a levelsurface using crushed stone, gravel, or cementpad asthe base.
RevisedApril 19,2017
FT-269H (392 lbs)
24”Lx24”Wx15”H
P-711 (535lbs)
47”Wx26”H
FT-269F(103 lbs)
13.5”Wx18”H
FT-269E (94lbs)
29”Wx9.5”H
FT-269C(35 lbs)
9.25”Wx14”H
1. Place thebase(FT-269H)onalevel surface capable of
holding1465 poundsina4squarefootarea wherethe
fountainwill beassembled.
a. Besure tocheckthat each part islevel and
centered duringthe assemblyof thisfountain.
2. Place theurn(P-711) over thebase.
3. Assemble thepumpkit
a. Fit the3/4”clear tubingover thepumpoutlet.
b.Place thestopper aroundthepumpcord
approximately8”fromthepump.
4. Feedthepumpcord all thewaythroughthehole intheurn
(P-711), throughthebase(FT-269H), andoutofthe
opening inthebottomofthebase.
5. FIRMLYpress thestopper intothehole evenly.
a. Note: Usingthehandle ofascrewdriver or hammer
worksbesttopress thestopper inplace.
6. Place thelargepedestal (FT-269F) over thepump.
7. Feedthetubing that isconnectedtothepumpthroughthe
hole inthecenter ofthelargepedestal (FT-269F).
8. Positionthemediumbowl(FT-269E) over thelarge
pedestal (FT-269F).
9. Usingahoseclamp, securethetubingthatwasfedthrough
thelargepedestal (FT-269F) tothepipeprotruding from
thebottomofthemediumbowl(FT-269E).
10. Securethe18”lengthoftubingtothepipeprotruding from
insidethemediumbowl(FT-269E) withahoseclamp.
11. Place thesmallpedestal (FT-269C) inthecenter ofthe
mediumbowl(FT-269E).
12. Feedthe18”lengthoftubingconnectedtotheinsideofthe
mediumbowl(FT-269E) throughthehole inthecenter of
thesmall pedestal (FT-269C).
FT-269B(40 lbs)
20.25”Wx7”H
FT-269A(22 lbs)
5.5”Wx12.5”H
FT-269D (3lbs)
5”Lx1.5”Wx5”H
FT-269G (5lbs)
6.25”Lx1.5”Wx5.25”H
FT-269I (15lbs)
7.75”Lx1.5”Wx7”H
13. Positionthesmall bowl(FT-269B) over thesmallpedestal
(FT-269C).
14. Usingahoseclamp, securethetubingthatwasfedthrough
thesmall pedestal (FT-269C) tothepipeprotruding from
thebottomofthesmall bowl(FT-269B).
15. Place thefinial (FT-269A) intothesmall bowl(FT-269B)
byfittingthecopper inthefinial over thecopper inthe
bowl.
16. Fit thesmall pumpcover door(FT-269D)intothesmall
pedestal (FT-269C).
17. Fit themediumpumpcover door (FT-269G)intothe
mediumpedestal (FT-269F).
18. Fit thebasedoor (FT-269I) intothebase(FT-269H).
19. Fill thebasinwithwater.