Campania International Dolce Nido User manual

F
T
-
326
Dolce
Nido
Fountain
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#7 stopper(1)
Approx.8”length of1/2”BlackNon-Kinktubing (1)**
1”length of5/8”clearvinyltubing (1)**
1”length of1/2"PVCpipe (1)**
Wedges(2)
Hose clamps(1)*
*Hoseclampsmaybe used as flow restrictor
**Tubing is preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately3-5 gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length
Revised July 17, 2018SHOP NOW
SHOP NOW
SHOP NOW

F
T
-
326
Dolce
Nido
Fountain
Assemble your fountainon alevel surface capable ofholding aminimumof250
poundswithanapproximate1squarefootfootprint.
FT-325C (209lbs)
24.75”Wx33.25”H
FT-325B (4lbs)
5”Wx2.5”H
FT-326B (14lbs)
13”Wx4”H
FT-326A(6lbs)
9.25”Wx3.75”H
1. Position thebasin(FT-325C) wherethefountainisto
beinstalled, ensuring that it islevel.
2. Assemble thefountainplumbing
a. NOTE:All pumpscomewith2adapters.
i. Thisfountain usesthe largeradapter
provided.
ii. Useahoseclamptoattachthenon-kink
tubing tothepumpoutlet.
b. Place thestopper around thepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordall thewaythrough thehole inthe
basinand run thecordthrough thechannel inthe
bottomtoensurethefountainwill belevel.
4. FIRMLY press thestopper intothehole evenly.
a. Note: Using thehandle ofascrewdriver or
hammerworksbesttopress thestopper inplace.
5. Place thepumpcover (FT-325B) over thepump.
Ensureit iscenteredand leveled.
6. InserttheCPVCend ofthetubing assemblyintothe
coupling protrudingfromthebottomofthesmallbowl
(FT-326B).
7. Center thesmall bowl (FT-326B) on top ofthepump
cover (FT-325B).
8. Center thewater featuredisc(FT-326A) inthecenter
ofthesmallbowl (FT-326B).
9. Fill thefountainwithwater.
Revised July 17, 2018
SHOP NOW