Camplex CMX-12GSDI-TR User manual

INCLUDES
Two 5DC/2A Power Supplies
One 12G-SDI Transmier
One 12G-SDI Receiver
Two SFPs
• Extends up to 6.25 miles over Singlemode Fiber
• SFP Based for Faster Connecvity
• Meets SMPTE ST 2082-1 & ST 2082-2 Standards
• 1 Reclocking SDI Loop Out on TX
• Embedded Audio
• Immune to RP-198 Interference
• Input Signal Detecon LED
• Cable EQ
• Rugged Metal Housing
CAMPLEX Brand Fiber Gear • 812 Kings Highway • Saugeres, NY 12477
www.camplex.com
USER MANUAL
d
Camplex CMX-12GSDI-TR
12G SDI Over Singlemode Fiber Extender
SFP-Based Transmission System
FEATURES

1SDI Input—Connect to Source
2Power LED
3Signal LED
4 Power Supply Connecon
5Loopout
6Output
CAMPLEX Brand Fiber Gear • 812 Kings Highway • Saugeres, NY 12477
www.camplex.com
CMX-12GSDI-TR TRANSMITTER TX
CMX-12GSDI-TR RECEIVER RX
5VDC/2A Power Supply
5VDC/2A Power Supply
5
124
3
Front Rear
3
56124
Front Rear
1SDI Input—Connect to Display
2Power LED
3Signal LED
4 Power Supply Connecon
5Input

SDI Standards 12GSDI/6GSDI/3GSDI/HD-SDI/SD-SDI
Transmission Distance 6.25 Miles Singlemode
Video Support
HD 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60,
1080p24/30,1080p60,1080p59.94, 4K2Kp30, 4K2Kp60, SD
[email protected], PAL@50Hz
Data Rates 270 / 1483 / 1485 / 2967 / 2970 / 5940 / 11880 Mbps
Video Bandwidth 2.97Gpbs & 2.97/1.001Gbps
Supports
SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps)
SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
SMPTE 424M / HDTV (2.97Gbps and 2.97/1.001Gbps)
SMPTE 2082-1 / HDTV (5.94Gbps and 5.94/1.001Gbps)
SMPTE 2082-2 / HDTV (11.88Gbps and 11.88/1.001Gbps)
Audio Embedded Audio
Dimensions/ Weight 2.9 x 2.9 x 1.0 in / 7.4 oz
CMX-12GSDI-TR SPECIFICATIONS
CAMPLEX Brand Fiber Gear • 812 Kings Highway • Saugeres, NY 12477
www.camplex.com
CONNECTION DIAGRAM
Fiber Cable
Display
Display
TRANSMITTER—TX RECEIVER—RX
Camera
Coax Cable

SAFETY PRECAUTIONS
Warranty
Camplex warrants the CMX-12GSDI-TR to be free from defects in the material and workmanship
for one year from the date of purchase. Should this product fail to be in good working order
within the one year warranty period, Camplex, at its opon, will repair or replace the unit,
provided the unit has not been subjected to accident, disaster, abuse, or any unauthorized
modicaons including stac discharge and power surges.
The content of this manual has been carefully reviewed and is believed to be accurate.
Camplex assumes no responsibility for any inaccuracies that may be contained in this manual.
Camplex will not be liable for direct, indirect, incidental, special, or consequenal damages
resulng from any defect or omission in this manual, even if advised of the possibility of such
damages. The technical informaon contained herein is subject to change without noce.
5/10/2017Rev1
CAMPLEX Brand Fiber Gear • 812 Kings Highway • Saugeres, NY 12477
www.camplex.com
1. To prevent re or shock hazard, do not expose this equipment to high humidity and/or
dust. Do not use in an unprotected outdoor installaon nor any area classied as overly
damp or wet.
2. The temperature for installaon should be between 32°F to 140°F (0°C to 60°C). Avoid
direct sunlight exposure or extreme changes of temperature over a short period of me.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be placed in a built-in installaon unless proper venlaon is provid-
ed. Any openings in the enclosure must not be blocked or covered as they protect the
unit from overheang.
6. Before cleaning, unplug the unit from all connecons. Use a clean, slightly damp cloth.
Do not use liquid or aerosol cleaners. Use appropriate cleaning kits for ber opc cables.
7. Do not overload outlets and extension cords as this could result in a re or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this
unit through openings as they may touch dangerous voltage points or short-out parts
that could result in a re or electric shock.
9. Do not aempt to open or service this unit yourself as opening or removing covers may
expose you to dangerous voltage and other hazards.
10. There are no user-serviceable parts inside the unit. If the unit requires service contact
your authorized dealer, or an authorized repair service company.