Candy FXIDC X615 User manual

CANDY HOOVER GROUP Via Comolli 16 Brugherio – Italy
User Instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
OVENS
FOURS
ÖFEN
FORNI
2
15
41
28
EN
FR
DE
IT
Instrucciones de uso
Handleiding
Instruções para o utilizador
HORNOS
OVENS
FORNOS
54
67
80
ES
NL
PT
93TR
Kullanıcı Talimatları
FIRINLAR
•FXIDC X615

EN 2
Safety Indications
General Instructions
Product description
Display description
Cooking Modes
General notes on cleaning
Maintenance
Troubleshooting
Installation
Summary
3
7
9
10
12
13
13
14
108

EN 3
• During cooking, moisture may condense inside the oven cavity
or on the glass of the door. This is a normal condition. To reduce
this eect, wait 10-15 minutes after turning on the power be-
fore putting food inside the oven. ln any case, the condensation
disappears when the oven reaches the cooking temperature.
• Cook the vegetables in a container with a lid instead of an open
tray.
• Avoid leaving food inside the oven after cooking for more than
15/20 minutes.
• WARNING: the accessible parts can become hot when the oven
is in use. Young children should be kept at a safe distance.
• WARNING: the accessible parts can become hot when the grill
is in use. Children should be kept at a safe distance.
• Disconnect the appliance from the mains electricity supply be-
fore carrying out any work or maintenance.
• WARNING: in order to avoid any danger caused by the acciden-
tal resetting of the thermal interruption device, the appliance
should not be powered by an external switching device, such as
a timer, or be connected to a circuit that is regularly switched on
and o.
• Children under 8 should be kept at a safe distance from the ap-
pliance if not continuously supervised.
• Children should not play with the appliance.
• The appliance can be used by those aged 8 or over and by those
with limited physical, sensorial or mental capacities, without
experience or knowledge of the product, only if supervised or
provided with instruction as to the operation of the appliance,
in a safe way with awareness of the possible risks.
• Cleaning and maintenance should not be carried out by unsu-
pervised children.
• Do not use rough or abrasive materials or sharp metal scrapers
to clean the oven door glasses, as they can scratch the surface
Safety Indications

EN 4
and cause the glass to shatter.
• The oven must be switched o before removing the removable
parts. After cleaning, reassemble them according the instruc-
tions.
• Only use the meat probe recommended for this oven.
• Do not use a steam cleaner or high pressure spray for cleaning
operations.
• IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH-
OUT PLUG:
THE APPLIANCE MUST NOT BE CONNECTED TO THE POW-
ER SOURCE USING PLUG OR SOCKETS, BUT MUST BE DI-
RECTLY CONNECTED TO THE SUPPLY MAINS. The con-
nection to the power source must be carried out by a suitably
qualied professional. In order to have an installation compliant
to the current safety legislation the oven must be connect-
ed only placing an omnipolar breaker, with contact separation
compliant to the requirements for overvoltage category III,
between the appliance and the power source. The omnipolar
breaker must bear the maximum connected load and must be
in line with current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The omnipolar break-
er used for the connection must be easily accessible when the
appliance is installed.
The connection to the power source must be carried out by a
suitably qualied professional considering the polarity of the
oven and of the power source.
The disconnection must be achieved incorporating a switch in
the xed wiring in accordance with the wiring rules
• IF THE OVEN IS PROVI ED BY THE MANUFACTURER WITH
PLUG:
The socket must be suitable for the load indicated on the tag
and must have ground contact connected and in operation.
The earth conductor is yellow-green in colour. This operation
should be carried out by a suitably qualied professional. ln case

EN 5
of incompatibility between the socket and the appliance plug,
ask a qualied electrician to substitute the socket with another
suitable type. The plug and the socket must be conformed to
the currentnormsofthe installation country.Connectiontothe
power source can also be made by placing an omnipolar break-
er, with contact separation compliant to the requirements for
overvoltage category III, between the appliance and the pow-
er source that can bear the maximum connected load and that
is in line with current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The socket or omnip-
olar breaker used for the connection should be easily accessi-
ble when the appliance is installed.
The disconnection may be achieved by having the plug accessi-
ble or by incorporating a switch in the xed wiring in accordance
with the wiring rules.
• lf the power cable is damaged, it should be substituted with a
cable or special bundle available from the manufacturer or by
contacting the customer service department. The type of pow-
er cable must be H05V2V2-F. This operation should be carried
out by a suitably qualied professional. The earth conductor
(yellow-green) must be approximately 10 mm longer than the
other conductors. For any repairs, refer only to the Customer
Care Department and request the use of original spare parts.
• Failure to comply with the above can compromise the safety of
the appliance and invalidate the guarantee.
• Any excess of spilled material should be removed before clean-
ing.
• A long power supply failure during an occurring cooking phase
may cause a malfunction of the monitor. ln this case contact
customer service.
• The appliance must not be installed behind a decorative door in
order to avoid overheating.
• When you place the shelf inside, make sure that the stop is di-
rected upwards and in the back of the cavity. The shelf must be

EN 6
inserted completely into the cavity.
• When inserting the grid tray pay attention that the anti-slide
edge is positioned rearwards and upwards.
• WARNING: Do not line the oven walls with aluminium foil or sin-
gle-use protection available from stores. Aluminium foil or any
other protection, in direct contact with the hot enamel, risk
melting and deteriorating the enamel of the insides.
• WARNING: Never remove the oven door seal.
• CAUTION: Do not rell the cavity bottom with water during
cooking or when the oven is hot.
• No additional operation/setting is required in order to operate
the appliance at the rated frequencies.
• The oven can be located high in a column or under a worktop.
Before xing, you must ensure good ventilation in the oven
space to allow proper circulation of the fresh air required for
cooling and protecting the internal parts. Make the openings
specied on last page according to the type of tting.
• For a correct use of the oven it is advisable not to put the food in
direct contact with the racks and trays, but to use oven papers
and / or special containers.

EN 7
General Instructions
Safety Indications
We thank you for choosing one of our products. For the best results with your oven, you should
read this manual carefully and retain it for future reference. Before installing the oven, take note
of the serial number so that you can give it to customer service sta if any repairs are required.
Having removed the oven from its packaging, check that it has not been damaged during trans-
portation. If you have doubts, do not use the oven and refer to a qualied technician for advice.
Keep all of the packaging material (plastic bags, polystyrene, nails) out of the reach of children.
When the oven is switched on for the rst time, strong smelling smoke can develop, which is
caused by the glue on the insulation panels surrounding the oven heating for the rst time. This
is absolutely normal and, if it occurs, you should wait for the smoke to dissipate before putting
food in the oven. The manufacturer accepts no responsibility in cases where the instructions
contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending
on the model you have purchased.
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer
cannot be held responsible for any damage resulting from improper, incorrect or unreasonable
usage.
The use of any electrical appliance implies the observance of some fundamental rules:
- do not pull on the power cable to disconnect the plug from the socket;
- do not touch the appliance with wet or damp hands or feet;
- in general the use of adaptors, multiple sockets and extension cables is not recommended;
- in case of malfunction and/or poor operation, switch o the appliance and do not tamper with it.
Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL
CONNECTIONS. The power supply to which the oven is connected must conform with the
laws in force in the country of installation. The manufacturer accepts no responsibility for any
damage caused by the failure to observe these instructions. The oven must be connected to
an electrical supply with an earthed wall outlet or a disconnector with multiple poles, depending
on the laws in force in the country of installation. The electrical supply should be protected with
suitable fuses and the cables used must have a transverse section that can ensure correct sup-
ply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to an electrical supply
with 220-240 Vac power between the phases or between the phase and neutral. Before the oven
is connected to the electrical supply, it is important to check:
- power voltage indicated on the gauge;
- the setting of the disconnector.

EN 8
The grounding wire connected to the oven’s earth terminal must be connected to the earth ter-
minal of the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualied electrician to check the conti-
nuity of the power supply’s earth terminal. The manufacturer accepts no responsibility for any
accidents or other problems caused by failure to connect the oven to the earth terminal or by an
earth connection that has defective continuity.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket
available so that the oven can be connected to this if it is removed from the space in which it is
installed. The power cable must only be substituted by technical service sta or by technicians
with equivalent qualications.
A low light around the central main switch could be present when the oven is o. This is a normal
behavior. I can be removed just turning the plug upside down or swapping the supply terminals.
Recommendations
Installation
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores. Al-
uminium foil or any other protection, in direct contact with the hot enamel, risks melting and de-
teriorating the enamel of the insides. In order to prevent excessive dirtying of your oven and the
resulting strong smokey smells, we recommend not using the oven at very high temperature. It
is better to extend the cooking time and lower the temperature a little. In addition to the acces-
sories supplied with the oven, we advise you only use dishes and baking moulds resistant to very
high temperatures.
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is
required to rectify faults arising from incorrect installation, this assistance is not covered by the
guarantee. The installation instructions for professionally qualied personnel must be followed.
Incorrect installation may cause harm or injury to people, animals or belongings. The manufac-
turer cannot be held responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before xing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specied on last page according to the type of
tting.

EN 9
1. Control panel
2. Shelf positions (lateral wire
grid if included)
3. Grids
4. Trays
5. Fan (if present)
6. Oven door
7. Lateral wire grids (if present:
only for at cavity)
8. Serial number
Product description
ACCESSORIES
Drip tray Metal grid
Collects residues that drip when cooking food
on the grills. Holds baking trays and plates.
Lateral wire grids (only if present)
Located on both sides of the oven cavity, holds
metal grills and drip pans.
1
2
7
3
8
4
6
5
First Use
PRELIMINARY CLEANING; Clean the oven before using for the rst time. Wipe over external surfaces
with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and
washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this
will remove any lingering smells of newness.

EN 10
Display description
1. Minute minder
2. Clock setting
3. Cooking time
4. Child Lock
5. Temperature or clock display
6. LCD display adjustment controls
7. Thermostat selector knob
8. Function selector knob
WARNING: the rst operation to carry out
after the oven has been installed or following
the interruption of power supply (this is re-
cognizable the display pulsating and showing
12:00 ) is setting the correct time. This is achie-
ved as follows.
•Push the central button 4 times
•Set time with “-” “+” buttons.
•Release all buttons.
ATTENTION: The oven will only operate pro-
viding the clock is set.
87 1 3
5
6
2 4

EN 11
FUNCTION HOW TO ACTIVATE HOW TO
DEACTIVATE WHAT IT DOES WHY IT IS NEEDED
KEY LOCK
Child Lock function
is activated by
touching Set (+)
for a minimum of 5
seconds. From this
moment on all other
function are locked
and the display will
ash STOP and
preset time inter-
mittently. From this
moment on all other
functions are locked,
LED of child lock
turn on, the display
will ash STOP and
present time inter-
mittently
Child Lock function
is deactivated by
touching touchpad
Set (+) again for a mi-
nimum of 5 seconds.
From this moment
on all functions are
selectable again.
From this moment
LED of child lock turn
o and all functions
are selectable again.
MINUTE
MINDER
Push the central
button
1 times
Press the buttons
“-” “+”
to set the required
time
Release all the
buttons
When the set time
as elapsed an audible
alarm is activated
(this alarm will stop
on its own, however
it can be stopped
immediately by
pressing the button)
SELECT.
Sounds an alarm at
the end of the set
time.
During the process,
the display shows
the remaining time.
Allows to use the oven
as alarm clock (could be
activated either with ope-
rating the oven or with
out operating the oven)
COOKING
TIME
Push the central
button 2 times
Press the buttons
“-” or “+”to set the
lenght of cooking
required
Release all buttons
Set the cooking
function with
the oven function
selector
Push any button to
stop the signal. Push
the central button to
return to the clock
function.
It allows to preset
the cooking time
required for the
recipe chosen.
To check how long
is left to run press
the SELECT button
2 Times.
To alter/change the
preset time press
SELECT and “-” “+”
buttons.
When the time is elapsed
the oven will switch o
automatically.
Should you wish to stop
cooking earlier either turn
the function selector to 0,
or set time to 0:00
(SELECT and “-” “+”
buttons)

EN 12
Cooking Modes
* Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.
Symbol
T °C
de-
fault
T °C
range Function
LAMP: Turns on the oven light.
DEFROST: When the dial is set to this position. The fan circulates air at
room temperature around the frozen food so that it defrosts in a few min-
utes without the protein content of the food being changed or altered.
180 50 ÷ MAX
MULTI-LEVEL: We recommend you use this method for poultry, pastries,
sh and vegetables. Heat penetrates into the food better and both the
cooking and preheating times are reduced. You can cook dierent foods
at the same time with or without the same preparation in one or more po-
sitions. This cooking method gives even heat distribution and the smells
are not mixed.
Allow about ten minutes extra when cooking foods at the same time.
190 50 ÷ MAX
* COOK LIGHT: This function allows to cook in a healthier way, by re-
ducing the amount of fat or oil required. The combination of heating ele-
ments with a pulsating cycle of air ensures a perfect baking result.
210 50 ÷ MAX
BOTTOM HEATING + FAN: The bottom heating element is used with the
fan circulating the air inside the oven. This method is ideal for juicy fruit
ans, tarts, quiches and pâté.
It prevents food from drying and encourages rising in cakes, bread dough
and other bottom-cooked food.
Place the shelf in the bottom position.
220 50 ÷ MAX
* CONVENTIONAL: Both top and bottom heating elements are used.
Preheat the oven for about ten minutes. This method is ideal for all tradi-
tional roasting and baking. For seizing red meats, roast beef, leg of lamb,
game, bread, foil wrapped food (papillotes), aky pastry. Place the food
and its dish on a shelf in mid position.
230 50 ÷ MAX
GRILL : use the grill with the door closed.
The top heating element is used alone and you can adjust the temper-
ature. Five minutes preheating is required to get the elements red-hot.
Success is guaranteed for grills, kebabs and gratin dishes. White meats
should be put at a distance from the grill; the cooking time is longer, but
the meat will be tastier. You can put red meats and sh llets on the shelf
with the drip tray underneath.
220 50 ÷ MAX PIZZA - With this function hot air circulated in the oven to ensure perfect
result for dishes such as pizza or cake.

EN 13
The lifecycle of the appliance can be extended
through regular cleaning. Wait for the oven to
cool before carrying out manual cleaning op-
erations. Never use abrasive detergents, steel
wool or sharp objects for cleaning, so as to not
irreparably damage the enamelled parts. Use
only water, soap or bleach-based detergents
(ammonia).
GLASS PARTS
It is advisable to clean the glass window with
absorbent kitchen towel after every use of
the oven. To remove more obstinate stains,
you can use a detergent-soaked sponge, well
wrung out, and then rinse with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly
General notes on cleaning
REMOVAL AND CLEANING OF THE SIDE RACKS
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they
are dried afterwards.
3. After the cleaning process install the wire racks in reverse order.”
Maintenance
damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge
before rinsing and drying them: avoid using
abrasive detergents.
DRIP PAN
After using the grill, remove the pan from the
oven. Pour the hot fat into a container and
wash the pan in hot water, using a sponge and
washing-up liquid.
If greasy residues remain, immerse the pan in
water and detergent. Alternatively, you can
wash the pan in the dishwasher or use a com-
mercial oven detergent. Never put a dirty pan
back into the oven.
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
This product contains one or more light sources of energy eciency class G (Lamp) /F (10 Led).

EN 14
Waste management and environmental protection
This appliance is labelled in
accordance with European Di-
rective 2012/19/EU regarding
electric and electronic appli-
ances (WEEE). The WEEE con-
tain both polluting substances
(that can have a negative ef-
fect on the environment) and base elements
(that can be reused). It is important that the
WEEE undergo specic treatments to cor-
rectly remove and dispose of the pollutants
and recover all the materials. Individuals can
play an important role in ensuring that the
WEEE do not become an environmental prob-
lem; it is essential to follow a few basic rules:
- the WEEE should not be treated as domestic
waste;
- the WEEE should be taken to dedicated col-
lection areas managed by the town council or a
registered company.
In many countries, domestic collections may
be available for large WEEEs. When you buy a
new appliance, the old one can be returned to
the vendor who must accept it free of charge
as a one-o, as long as the appliance is of an
equivalent type and has the same functions as
the purchased appliance.
Troubleshooting
Problem Possible cause Solution
the oven does not heat
up The clock is not set Set the clock
The oven does not
heat up A cooking function and temperature has not been set Ensure that the necessary settings are correct
No reaction of the
touch user interface Steam and condensation on the user in- terface panel
Clean with a microber cloth the
user interface panel to remove the
condensation layer
SAVING AND RESPECTING THE ENVIRON-
MENT
Where possible, avoid pre-heating the oven
and always try to ll it. Open the oven door as
infrequently as possible, because heat from
the cavity disperses every time it is opened.
For a signicant energy saving, switch o the
oven between 5 and 10 minutes before the
planned end of the cooking time, and use the
residual heat that the oven continues to gen-
erate. Keep the seals clean and in order, to
avoid any heat dispersal outside of the cavity.
If you have an electric contract with an hour-
ly tari, the “delayed cooking” programme
makes energy saving more simple, moving the
cooking process to start at the reduced tari
time slot.

FR 15
Sommaire
Conseils De Sécurité
Instructions Générales
Description du produit
Description de l’achage
Mode de cuisson
Nettoyage du four et maintenance
Entretien
Dépannage
Installation
16
20
22
23
25
26
26
27
108

FR 16
• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur
de la cavité ou sur la vitre de la porte. Il s’agit d’un phénomène
normal. Pour réduire cet eet, attendez 10-15 minutes après
avoir allumé l’appareil avant de mettre les aliments au four. La
condensation disparaîtra de toutes façons dès que le four aura
atteint la température de cuisson.
• Cuisez les légumes dans un récipient avec couvercle plutôt que
dans un ustensile ouvert.
• Évitez de laisser des aliments à l’intérieur du four plus de 15-20
minutes après cuisson.
• AVERTISSEMENT : L’appareil et ses parties accessibles
chauent pendant l’utilisation. Faites attention à ne pas touch-
er les parties chaudes.
• • AVERTISSEMENT : les parties accessibles peuvent devenir
chaudes lorsque le four est utilisé. Les enfants doivent rester à
une distance de sécurité.
• Débrancher l’appareil du secteur avant d’eectuer tout travail
ou opération d’entretien.
• AVERTISSEMENT : An d’éviter tout risque lié à la réinitialisa-
tion accidentelle de l’interrupteur thermique, l’appareil ne doit
pas être alimenté par un dispositif de commutation externe, tel
qu’une minuterie, ou relié à un circuit régulièrement allumé et
éteint.
• Les enfants de moins de 8 ans doivent rester à une distance de
sécurité de l’appareil s’ils ne sont pas surveillés en permanence.
• Les enfants ne doivent pas jouer avec l’appareil.
L’appareil peut être utilisé par des enfants de plus de 8 ans et
par des personnes dont les capacités physiques, sensorielles
ou mentales sont limitées, sans expérience ni connaissance du
produit, uniquement s’ils sont surveillés ou s’ils ont été informés
de la manière d’utiliser l’appareil, en toute sécurité et qu’ils com-
prennent les risques possibles.
Conseils De Sécurité

FR 17
• Le nettoyage et l’entretien ne doivent pas être eectués par
des enfants sans surveillance.
• N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs
métalliques acérés pour nettoyer les vitres des portes des
fours, car cela pourrait rayer la surface et provoquer la rupture
de la vitre.
• Coupez le four avant de retirer les pièces amovibles.
• Après le nettoyage, remontez-les selon les instructions.
• Utilisez uniquement la sonde à viande recommandée pour ce
four.
• Ne pas utiliser de nettoyeur vapeur ou de vaporisateur à haute
pression pour les opérations de nettoyage.
• SI LE FOUR EST FOURNI PAR LE FABRICANT SANS BOU-
CHON:
L’APPAREIL NE DOIT PAS ÊTRE CONNECTÉ À LA SOURCE
D’ALIMENTATION À L’AIDE DE FICHES OU DE PRISES, MAIS
DOIT ÊTRE DIRECTEMENT CONNECTÉ AU SECTEUR. Le
raccordement à la source d’alimentation doit être eectué
par un professionnel dûment qualié. An d’avoir une instal-
lation conforme à la législation de sécurité en vigueur, le four
doit être connecté en ne plaçant qu’un disjoncteur omnipo-
laire, avec séparation des contacts conforme aux exigences
de la catégorie de surtension III, entre l’appareil et la source
d’énergie. Le disjoncteur omnipolaire doit supporter la charge
maximale connectée et doit être conforme à la législation en
vigueur. Le conducteur jaune et vert de mise à la terre ne doit
pas être bloqué par le disjoncteur. Le disjoncteur omnipolaire
utilisé pour la connexion doit être facilement accessible lorsque
l’appareil est installé.
Le raccordement à la source d’alimentation doit être eectué
par un professionnel qualié en tenant compte de la polarité du
four et de la source d’alimentation.
La déconnexion doit être réalisée en incorporant un interrup-
teur dans le câblage xe conformément aux règles de câblage

FR 18
• SI LE FOUR EST FOURNI PAR LE FABRICANT AVEC FICHE:
La prise doit être adaptée à la charge indiquée sur l’étiquette et
doit avoir un contact de terre connecté et en fonctionnement.
Le conducteur de mise à la terre est jaune et vert. Cette opéra-
tion doit être eectuée par un professionnel qualié. En cas d’in-
compatibilité entre la prise et la che de l’appareil, demandez à
un électricien qualié de remplacer la prise par un autre type ap-
proprié. La che du câble d’alimentation et la prise d’alimenta-
tion doivent être conformes aux normes en vigueur dans le pays
d’installation. La connexion à la source d’énergie peut également
être réalisée en plaçant un disjoncteur omnipolaire, avec sépa-
ration des contacts conforme aux exigences de la catégorie
de surtension III, entre l’appareil et la source d’énergie pouvant
supporter la charge maximale connectée et conforme à la lég-
islation en vigueur. Le conducteur jaune et vert de mise à la terre
ne doit pas être bloqué par le disjoncteur. La prise d’alimentation
ou le disjoncteur multipolaire utilisé pour le branchement doit
rester à tout moment accessible après installation de l’appareil.
Le débranchement doit se faire en accédant à la prise d’alimen-
tation ou en prévoyant un interrupteur sur le circuit électrique
xe, conforme aux normes électriques.
• Si le câble d’alimentation est endommagé, il doit être remplacé
par un câble ou un faisceau de câbles spécial disponible auprès
du fabricant ou du service après-vente.
• Le câble d’alimentation requis est le H05V2V2-F.
• Cette opération doit être exécutée par le personnel qualié. Le
conducteur de mise à la terre (jaune et vert) doit être environ 10
mm plus long que les autres conducteurs. Pour toutes répara-
tions, contactez le service après-vente en insistant sur l’utilisa-
tion de pièces de rechange d’origine.
• Le non-respect des consignes ci-dessus peut compromettre
la sécurité de l’appareil et annuler la garantie.
• Éliminez les éclaboussures importantes avant de procéder au
nettoyage.

FR 19
• Une coupure de courant prolongée durant une phase de cui-
sson peut engendrer un dysfonctionnement de l’écran. Dans
ce cas, veuillez contacter le service après-vente.
• L’appareil ne doit pas être installé derrière une porte décorative,
pour éviter la surchaue.
• Lors de l’insertion de la grille, faites attention à ce que le bord
antidérapant soit positionné vers l’arrière et vers le haut.
• Pour introduire la grille dans le four, vériez que le butoir est di-
rigé vers le haut et au fond de la cavité. La grille doit être com-
plètement insérée dans la cavité.
• AVERTISSEMENT : Ne recouvrez pas les parois du four avec du
papier aluminium ou une protection jetable disponible dans les
magasins. Le papier d’aluminium ou toute autre protection, en
contact direct avec l’émail chaud, risque de fondre et de détéri-
orer l’émail de la cavité intérieure.
• AVERTISSEMENT : N’enlevez jamais le joint de la porte du four.
• PRUDENCE : Ne remplissez pas le fond de la cavité avec de l’eau
pendant la cuisson ou lorsque le four est chaud.
• Aucune autre opération ni aucun autre réglage ne sont requis
pour faire fonctionner l’appareil aux fréquences nominales.
• Le four peut être placé en hauteur dans une colonne ou sous un
plan de travail. Avant de le xer, vous devez garantir une bonne
ventilation dans l’espace du four pour permettre une circulation
correcte de l’air frais requis pour refroidir et protéger les parties
situées à l’intérieur. Réalisez les ouvertures spéciées à la dern-
ière page en fonction du type de xation.
• Pour une utilisation correcte du four, il est recommandé de ne
pas mettre les aliments en contact direct avec les grilles et les
plateaux, mais d’utiliser des papiers de cuisson et/ou des récip-
ients spéciaux.

FR 20
Instructions Générales
Indications de sécurité
Nous vous remercions d’avoir choisi un de nos produits. Pour obtenir les meilleurs résultats avec
votre four, vous devez lire attentivement ce manuel et le conserver pour toute consultation ul-
térieure. Avant d’installer le four, notez le numéro de série, il vous sera demandé par le support
technique si des réparations sont nécessaires. Après avoir enlevé le four de son emballage, véri-
ez qu’il n’a pas été endommagé pendant le transport. Si vous avez des doutes, ne pas utiliser le
four et se référer à un technicien qualié pour obtenir des conseils. Conservez tous les matér-
iaux d’emballage (sacs en plastique, polystyrène, clous) hors de la portée des enfants.Lors de la
première utilisation du four, il peut se produire un dégagement de fumée âcre provoqué par le
premier échauement de la colle des panneaux d’isolation enveloppant le four. Ce phénomène
est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline toute
responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas
respectées.
REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peu-
vent varier selon les modèles.
Utilisez uniquement le four à sa destination, qui est seulement pour la cuisson des aliments; toute
autre utilisation, par exemple comme une source de chaleur, est considérée comme inappropriée
et donc dangereuse. Le fabricant ne peut être tenu responsable de tout dommage lié à une mau-
vaise utilisation ou à des modications techniques du produit.
L’utilisation de tout appareil électrique implique le respect de certaines règles fondamentales:
- Ne tirez pas sur le câble d’alimentation pour déconnecter le produit de la source d’alimentation
- Ne pas toucher l’appareil avec les mains ou les pieds mouillés ou humides;
- En général l’utilisation d’adaptateurs, de prises multiples et de rallonges est déconseillée;
- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l’appareil et ne pas
y toucher.
Sécurité électrique
LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU
UN TECHNICIEN DE QUALIFICATION SIMILAIRE.
L’alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur
dans le pays d’installation. Le fabricant décline toute responsabilité pour tout dommage causé
par le non respect de ces instructions. Le four doit être raccordé à l’alimentation électrique avec
une prise murale reliée à la terre ou par l’intermédiaire d’un dispositif à coupure omnipolaire, se-
lon les lois en vigueur dans le pays d’installation. L’alimentation électrique doit être protégée par
des fusibles appropriés et les câbles utilisés doivent avoir une section transversale qui peut as-
surer une alimentation normale du four.
CONNEXION
Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension
électrique de 220-240 V entre les phases ou entre phase et neutre. Le raccordement devra être
eectué après avoir vérié:
- La tension d’alimentation indiquée sur le compteur;
- Le réglage du dijoncteur.