canolight CL-5050TD User manual

Low Voltage LED Strip Light
SuperBright Series
24 Volt strip, higher performance
than 12 Volt strip
High efficiency; more than 100Lm/w
CRI>80
Life time > 50,000 hours
.
Considering IP range, Conolight strips can be used in all interior and exterior
applications
display boords, cobinets,
A
+
2 years warranty
cUL approved
High quality 3M back adhesive
Double PCB, using copper
Dimmable subject to appropriate power supply
Technical specifications:
Power
LED Module CCT Lumen/m Beam Angle CRI Input Voltage Cut SDCM PCB width IP
CL-5050TD 13W/M 5050 RGB - 120 <80 24VDC 10cm > 6 10mm IP 20
CL-2835TD 8W/M 2835 3000K 800lm 120 <80 24VDC 10cm >6 8mm IP 20
4000K
Power supply Input: 110V-Output: 24V 2A Power: 48W
Power supply
Input: 110V-Output: 24V 3.5A Power: 85W
WiFi RGB
Controller
Input: 24VDC-Output: 0.2A/Channel
Alexa/Google assistant supported -Android/IOS
Compatible - Dimensions: 64*24*12mm
Fast connector
with wire Available in both 8mm and 10mm width
Available in both 8mm and 10mm width
Fast connector
without wire
L shape fast
connector
Female
connector
4 Pin male
connector
RGB dual
connector
Available in both 8mm and 10mm width
Accessories:
R
-
G
B
R
G
B
-
24VDC
10mm
5mm
123456 22216
ROLL : 5M
5mm
R
-
G
B
R
G
B
-
24VDC +
-
10cm
8mm
2.8mm
3.5mm
12 1
2.8mm
3.5mm
34
2.8mm
3.5mm
56 21 21 21 26
ROLL : 5M
CL-5050TD
CL-2835TD R
-
G
B
R
G
B
-
+
-
+
-
+
-
+
-
10cm
5000K
such as residential houses, commercial buildings, light boxes,
shelves and even under water (IP 68).
Applications:
www.canolight.ca [email protected]
Why Canolight LED strips?
Product
code
0
0
Type 2835 Type 5050

www.canolight.ca [email protected]
Installation Guide:
1- Clean the surface on which you would like to stick the strip.
Safety Warnings:
2- Remove the sticker paper and stick the strip on clean surface.
3- Connect the strip to the power supply.
Do not connect the strip directly to high voltage power source.
Use only 24 volts, Class 2 DC LED power supplies.
Do not power rolled up strips.
Do not use IP 20 strips in wet locations or outdoor applications.
Do not connect more than 10 meters of strips in series mode to one power supply.
Only cut the strips where there are scissors signs.
Do not bend or fold the strips unless using proper accessories.
Do not use dimmer unless along with dimmable power supply.
CL-2835TD/8watt per meter CL-5050TD/RGB/13watt per meter
48W
96W
144W
5meters
5meters
5meters
4- Connect the power supply to main power.
For further information please visit Canolight website.
78w
5meters
RGB
Controller
1- Clean the surface on which you would like to stick the strip.
96W
5meters
Power supply LED Strip
Power supply
LED Strip RGB WiFi
Controller
* Please scan both QR codes on the Wi ficontroller
manual and fallow the instructions accordingly.
Power supply Power supply
IOS Android
/