Canon PIXMA MG5420 User manual

Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG5420
Windows OS
1
<< Previous Next >>

Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG5420
Windows OS
Preparing to Connect My Multifunction To My Network 3
Network Requirements 3
Notes on Wireless Connection 4
Using the Machine from Additional Computers 5
2
<< Previous Next >>

3
Preparing to Connect My Multifunction
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
<< Previous Next >>

4
Preparing to Connect My Multifunction
To My Network << Previous Next >>
4
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
•In an office setup, consult your network administrator
•If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
•If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
•Place the machine and computer on the same network segment.
An "Ad-hoc connection," which establishes a direct connection to the computer
over a wireless connection without using an access point, is not supported.
A router or access point is required for your printer to be used on a wireless
network.

Using the Machine from Additional Computers
5
Software Installation
If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. Only the software
needs to be installed. It is not necessary to make any changes or settings on the printer itself.
To use from additional computers
IMPORTANT
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
<< Previous Next >>

Using the Machine from Additional Computers
6
<< Previous Next >>
Installing the PIXMA MG5420 on Additional Computers
If your printer is already on your network, and you wish to use the printer from additional computers, you will need to install the printer software on the
other computers. If the network setup has already been completed, the connection is confirmed automatically. A step-by-step walk through of the
wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
Simply insert the Setup CD-ROM* that came with your printer into your CD-ROM drive of each computer you wish to use with the printer and proceed
through the easy to follow instructions.
*You can also use the setup file available for download on our web site. Click here for information.

7
<< Previous Next >>Installing the Drivers
On the Software Installation List screen, select any additional software* you wish to install, then click Next
Follow any remaining on-screen instructions to finish and exit the setup program.
*MP Drivers is pre-selected and required for wireless network connection. We recommend also installing My Image
Garden and Quick Menu to enjoy all the features of the printer.
Note: If using the downloaded MiniMaster file, only the MP Drivers are included. My Image Garden and Quick Menu
can be downloaded and installed separately.

8
Using the Machine from Additional Computers << Previous
Installing the PIXMA MG5420 on Additional Computers
If you can’t find your CD-ROM, you may download the MG5400 series Mini Master Setup, which includes the same step-by-step installation as the CD-
ROM, by following the instructions below:
1. Click here to access the MG5420 Drivers & Software page.
2. Select the operating system of your computer (see example below).
3. Expand the ‘Drivers’ section by clicking the red triangle, if necessary.
4. Click on the ‘MG5400 series Mini Master Setup’ entry.
5. After reading the details and disclaimer, click ‘I Agree – Begin Download’ and save the file to your computer or network.
6. Once the download is complete, double-click the file from its download location to begin the installation.
Back to instructions