Canon PIXMA MX892 User manual

Setting Up Your MX892 In
Default Mode (Tel Priority Mode)
Without An Answering Machine
Next

Fax Easy Setup
NextPrevious
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Press the FAX button at any screen
to go to fax standby mode.
Step 2
Click Next to proceed
through the setup.

Connecting The Phone Lines
NextPrevious

(Existing Phone Cord)
Wall Jack Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 4
Before
After
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 5
•Plug the provided phone cord into the wall jack
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 6
•Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 7
•Remove the white plug from the upper jack labeled “EXT.”
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 8
•Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 9
•Plug the second phone cord into the phone
Wall Jack
(Existing Phone Cord)
(Phone Cord included with Canon printer)
Hand Set
(Phone)

Setting Up The Receive Mode
NextPrevious