Canon imagePRESS Lite C270 User manual

INSTALLATION
MANUAL
imagePRESS
Lite C270/C265
Canon
September 7,2022
Rev.4
COPYRIGHT © 2022 CANON INC.
CANON imagePRESS Lite C270/C265 Rev. 4PRINTED IN U.S.A.

Important Notices
Application
Canon Inc. has issued this manual for qualified persons to learn technical theory, installation, maintenance, and repair of products.
This manual covers all localities where the products are sold. For this reason, this manual may contain information that does not
apply to your locality.
Following "Trademarks" and "Copyright" are not applicable if they are not supported by laws and regulations in the country or
region that this document and products are used in.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
When changes occur in applicable products or in the contents of this manual, Canon will release technical information as the
need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new
edition of this manual.
Trademarks
• The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Canon is under license.
• Mopria®, the Mopria® Logo and the Mopria® Alliance logo are registered trademarks and service marks of Mopria Alliance,
Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
• Apple, AppleTalk, Bonjour, iPad, iPhone, iPod touch, Mac, OS X and Safari are trademarks of Apple Inc.
• Microsoft, Windows, Windows Vista, Windows Server, Internet Explorer, Microsoft Edge, Excel and PowerPoint are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• Google Cloud Print, Google Chrome and Android are either registered trademarks or trademarks of Google Inc.
• iHQC™ compression technology by I.R.I.S., copyright 2007-2015, All Rights Reserved.
• PDF-iHQC™, XPS-iHQC™ technology by I.R.I.S., copyright 2007-2015, All rights Reserved.
• Java is a registered trademark of Oracle and/or its affiliates.
• Adobe is a registered trademark of Adobe Systems Incorporated.
• Command WorkStation, EFI, Fiery, FreeForm, Spot-On, and WebTools are trademarks of Electronics For Imaging, Inc. and/
or its wholly owned subsidiaries in the U.S. and/or certain other countries.
• TORX® is a registered trademark of Acument Intellectual Properties, LLC in the United States.
• Matrox is a registered trademark of Matrox Corporation in the Canada.
• Other product names and other names in this document are generally registered trademarks or trademarks of the companies.
Copyright
The copyright of this document belongs to Canon Inc. This document may not be copied, reproduced or translated into another
language, in whole or in part, without the prior consent of Canon Inc.
Copyright CANON INC. 2022
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
Important Notices

Symbols
The frequently-performed operations are described with symbols in this procedure.
1x 1x 1x
Install
Screw
Packaged Item Remove Tighten Loosen
1x
Connect
Connector
Disconnect
Install
Harness
(Common for Guides
and Clamps)
Remove
1x 1x
Connect
Power Cord
Disconnect
Check visuallyCheck the sound Check
OFF Cleaning ON Push
Power
Unused Parts
1x 1x
Important Notices

Contents
Safety Precautions...............................................................................................1
Toner Safety........................................................................................................................................2
About Toner..........................................................................................................................................2
Handling Adhered Toner........................................................................................................................2
Points to Note at Installation................................................................................................................2
Checking the Installation Environment....................................................................................................2
Points to Note Before Servicing..............................................................................................................2
Essential Items to Be Performed Before Installation.................................................................................3
Points to Note When Turning ON/OFF the Main Power............................................................................3
Checking the Installation Space............................................................................................................. 4
illustrations........................................................................................................................................... 5
Description on the parts included in the package ....................................................................................5
1. Product Lineup.................................................................................................6
Image Reading System Options..........................................................................................................7
Function expansion system options.................................................................................................... 8
Combination Table of Accessory Installation........................................................................................... 9
Pickup/Delivery System Options....................................................................................................... 10
2. Host Machine..................................................................................................12
How to Utilize This Installation Procedure.........................................................................................13
Description on the parts included in the package...................................................................................13
Symbols............................................................................................................................................. 13
Checking before Installation..............................................................................................................14
Checking the Power Supply................................................................................................................. 14
Checking the Installation Environment.................................................................................................. 14
Points to Note at Installation.................................................................................................................14
Points to Note When Moving This Host Machine................................................................................... 14
Checking the installation space............................................................................................................ 15
Installation Procedure........................................................................................................................17
Unpacking.......................................................................................................................................... 17
Checking the Contents........................................................................................................................ 22
Installing the Scanner ......................................................................................................................... 24
Installing the Buffer Path Unit (Only Models with the Buffer Path Unit Included as Standard) (for US
and EUR)........................................................................................................................................ 33
Installing the Fixing Feed Assembly......................................................................................................42
Installing the Process Unit (for Color)....................................................................................................46
Installing the Developing Assembly (for Black)...................................................................................... 57
Installing the Noise Reduction Cover.................................................................................................... 66
Securing the Host Machine.................................................................................................................. 69
Preparing Connection of the Main Power.............................................................................................. 69
Turning on the main power supply........................................................................................................71
Installing the Toner Container.............................................................................................................. 71
Host Machine Settings (Starting Setup Guide).......................................................................................72
Registration of Installation Date Information.......................................................................................... 72
Contents
i

Auto Adjust Gradation (Full Adjustment)............................................................................................... 73
Register Paper to Adjust......................................................................................................................74
Execution of Correct Shading...............................................................................................................75
Auto Correct Color Tone Settings (Register Correction Pattern)............................................................. 78
Installing the Reader Assembly............................................................................................................ 78
Other Installations............................................................................................................................... 80
Checking the K Paper Settings (Only for CHINA) ..................................................................................82
Deck Settings..................................................................................................................................... 82
Cassette Settings................................................................................................................................84
Image Position Adjustment.................................................................................................................. 86
Image Position Adjustment (Single Pass ADF).................................................................................... 130
Checking the Network Connection......................................................................................................140
Network Troubleshooting................................................................................................................... 141
Operation when using uniFLOW Online.............................................................................................. 142
Installing the IC Card Reader............................................................................................................. 142
3. Image Reading System Options................................................................. 149
Printer Cover-H2............................................................................................................................. 150
Points to Note before Installation........................................................................................................ 150
Checking the Included Parts...............................................................................................................150
Installation Outline Drawing................................................................................................................151
Installation Procedure........................................................................................................................151
Operation Check............................................................................................................................... 168
Reader Heater-P1........................................................................................................................... 169
Checking the Contents...................................................................................................................... 169
Installation Outline Drawing................................................................................................................169
Installation Procedure........................................................................................................................170
4. Host Machine Options................................................................................. 188
Connection Kit-A4 for Bluetooth LE.................................................................................................189
Checking the Contents...................................................................................................................... 189
Installation Outline Drawing................................................................................................................189
Installation Procedure........................................................................................................................190
Setting after Installation..................................................................................................................... 204
Numeric Keypad-A2........................................................................................................................ 205
Points to Note before Installation........................................................................................................ 205
Checking the Contents...................................................................................................................... 205
Installation Outline Drawing................................................................................................................205
Installation Procedure........................................................................................................................206
Utility Tray-B1..................................................................................................................................215
Points to Note at Installation...............................................................................................................215
Checking the Contents...................................................................................................................... 215
Installation Outline Drawing................................................................................................................215
Installation Procedure........................................................................................................................215
Copy Card Reader-F1/Copy Card Reader Attachment-A5............................................................. 222
Points to Note at Installation...............................................................................................................222
Checking the Contents...................................................................................................................... 222
Installation Outline Drawing................................................................................................................223
Installation Procedure........................................................................................................................224
Checking after Installation..................................................................................................................234
Contents
ii

Voice Guidance Kit-G1....................................................................................................................235
Points to Note at Installation...............................................................................................................235
Checking the Contents...................................................................................................................... 235
Installation Outline Drawing................................................................................................................236
Installation Procedure........................................................................................................................237
Checking after Installation..................................................................................................................245
Operation Check............................................................................................................................... 245
Voice Operation Kit-D1....................................................................................................................246
Points to Note at Installation...............................................................................................................246
Checking the Contents...................................................................................................................... 246
Installation Outline Drawing................................................................................................................247
Installation Procedure........................................................................................................................248
Checking after Installation..................................................................................................................255
Operation Check............................................................................................................................... 255
Serial Interface Kit-K3/Copy Control Interface Kit-A1......................................................................257
Points to Note at Installation...............................................................................................................257
Checking the Contents...................................................................................................................... 257
Installation Outline Drawing................................................................................................................258
Installation Procedure........................................................................................................................259
Super G3 FAX Board-AX1.............................................................................................................. 264
Product Name...................................................................................................................................264
Installation Outline Drawing................................................................................................................264
Checking the Contents...................................................................................................................... 265
Installation Procedure........................................................................................................................266
Checking the Operation..................................................................................................................... 270
Super G3 2nd Line Fax Board-AX1.................................................................................................272
Product Name...................................................................................................................................272
Installation Outline Drawing................................................................................................................273
Checking the Contents...................................................................................................................... 274
Installation Procedure........................................................................................................................275
Checking the Operation..................................................................................................................... 280
SSD-related Option......................................................................................................................... 282
Pre-checks........................................................................................................................................282
[TYPE-1] Option SSD (1TB)...............................................................................................................282
[TYPE-2] Memory Mirroring Kit...........................................................................................................290
imagePRESS Server M20...............................................................................................................301
The IP addresses for communication between the host machine and equipment are set automatically ...301
Check When Connecting the Power Plug to an Outlet..........................................................................301
Checking the Contents ......................................................................................................................301
Installation Procedure........................................................................................................................302
Settings After Installation................................................................................................................... 311
Accessory Interface Kit-A2..............................................................................................................317
Points to Note at Installation...............................................................................................................317
Checking the contents....................................................................................................................... 317
Installation Outline Drawing................................................................................................................317
Installation Procedure........................................................................................................................318
5. Paper Feed Options..................................................................................... 326
Cassette Heater Unit-38..................................................................................................................327
Product Name...................................................................................................................................327
Contents
iii

Checking the Contents...................................................................................................................... 327
Installation Outline Drawing................................................................................................................327
Installation Procedure........................................................................................................................327
Paper Deck Unit-E1.........................................................................................................................336
Checking before Installation............................................................................................................... 336
Unpacking Procedure........................................................................................................................ 336
Checking the Contents...................................................................................................................... 337
Installation Procedure........................................................................................................................338
Checking after Installation..................................................................................................................358
Paper Deck Heater Unit-A1.............................................................................................................364
Checking before Installation............................................................................................................... 364
Checking the Supplied Parts.............................................................................................................. 364
Installation Procedure........................................................................................................................365
Checking after Installation..................................................................................................................379
POD Deck Lite-C1...........................................................................................................................380
Checking before Installation............................................................................................................... 380
Unpacking........................................................................................................................................ 380
Checking the Contents...................................................................................................................... 381
Installation Procedure........................................................................................................................383
Disposal Parts...................................................................................................................................402
Paper Positioning Check/Adjustment Procedure..................................................................................402
Multi-drawer Paper Deck-E1........................................................................................................... 407
Checking before Installation............................................................................................................... 407
Unpacking........................................................................................................................................ 409
Checking the Contents...................................................................................................................... 416
Installation Procedure ....................................................................................................................... 417
Removing from the Connection Equipment ........................................................................................ 464
Relocating the Machine..................................................................................................................... 473
Paper Deck Path Kit-B1.................................................................................................................. 479
Checking before Installation............................................................................................................... 479
Unpacking........................................................................................................................................ 479
Checking the Contents...................................................................................................................... 482
Installation Procedure ....................................................................................................................... 484
Checking after Installation..................................................................................................................507
Long Sheet Tray-B1........................................................................................................................ 508
Points to Note at Installation...............................................................................................................508
Checking the Contents...................................................................................................................... 508
Installation Outline Drawing................................................................................................................508
Installation Procedure........................................................................................................................510
Stack Bypass Alignment Tray-D1....................................................................................................522
Points to Note at Installation...............................................................................................................522
Checking the Contents...................................................................................................................... 522
Installation Outline Drawing................................................................................................................522
Installation Procedure........................................................................................................................523
Subsequent Work..............................................................................................................................530
Stack Bypass-D1.............................................................................................................................535
Points to Note at Installation...............................................................................................................535
Checking the Contents...................................................................................................................... 535
Installation Outline Drawing................................................................................................................536
Installation Procedure........................................................................................................................536
Adjustment after Installation............................................................................................................... 548
Contents
iv

6. Paper Output Options..................................................................................555
Buffer Pass Unit-M1........................................................................................................................ 556
Product Name...................................................................................................................................556
Checking the Contents...................................................................................................................... 556
Installation Procedure........................................................................................................................557
Document Insertion Unit-R1............................................................................................................568
Checking before Installation............................................................................................................... 568
Unpacking Procedure........................................................................................................................ 569
Checking the Contents...................................................................................................................... 571
Installation Outline Drawing................................................................................................................573
Installation Procedure ....................................................................................................................... 574
Adjustment........................................................................................................................................596
Checking after Installation..................................................................................................................603
Document Insertion/Folding Unit-K1............................................................................................... 605
Checking Before Installation...............................................................................................................605
Unpacking........................................................................................................................................ 605
Checking the Contents...................................................................................................................... 613
Installation Procedure ....................................................................................................................... 614
Checking after Installation..................................................................................................................625
Adjusting the Height and Tilt...............................................................................................................626
Paper Folding Unit-K1.....................................................................................................................639
Checking before Installation............................................................................................................... 639
Unpacking........................................................................................................................................ 639
Checking the Contents...................................................................................................................... 642
Installation Procedure ....................................................................................................................... 643
Adjustment........................................................................................................................................661
Checking after Installation..................................................................................................................673
Staple Finisher-AG1/Booklet Finisher-AG1.....................................................................................675
Checking before Installation............................................................................................................... 675
Unpacking Procedure........................................................................................................................ 677
Checking the Contents...................................................................................................................... 681
Installation Procedure ....................................................................................................................... 682
Adjusting the Height.......................................................................................................................... 711
Connecting the LAN Cable.................................................................................................................716
Connecting the Power Cord and Operation Check...............................................................................720
Side Registration/Skew Adjustment.................................................................................................... 721
Peeling and Attaching the Labels....................................................................................................... 728
Checking after Installation..................................................................................................................731
Finisher Long Sheet Catch Tray-B1................................................................................................732
Checking before Installation............................................................................................................... 732
Checking the Contents...................................................................................................................... 732
Installation Procedure........................................................................................................................732
Checking after Installation..................................................................................................................736
Removing the Finisher Long Sheet Catch Tray....................................................................................738
Puncher Unit-BT1/BS1/BU1 ...........................................................................................................741
Points to Note at Installation...............................................................................................................741
Points to Note before Installation........................................................................................................ 741
Product Name...................................................................................................................................741
Checking the Contents...................................................................................................................... 742
Installation Procedure........................................................................................................................742
Contents
v

Affixing the A1 Labels........................................................................................................................750
Adjustments......................................................................................................................................751
Staple Finisher-AC1/ Booklet Finisher-AC1.................................................................................... 764
Checking before Installation............................................................................................................... 764
Unpacking........................................................................................................................................ 766
Checking the Contents...................................................................................................................... 768
Installation Procedure........................................................................................................................769
Affixing the Labels.............................................................................................................................779
Making Adjustments.......................................................................................................................... 782
Making Checks after Completion of Installation Work...........................................................................796
Detach this Equipment from the Upstream Connection Machine...........................................................798
2/3 2/4 4 Hole Puncher Unit-A1.......................................................................................................800
Checking Before Installation...............................................................................................................800
Unpacking Procedure........................................................................................................................ 800
Checking the Contents...................................................................................................................... 802
Installation Procedure........................................................................................................................802
Disposal Parts Check........................................................................................................................ 817
Operation Check............................................................................................................................... 817
Adjusting the Output Level of the Punch Waste Full Sensor................................................................. 818
Checking and Adjusting the Punch Hole Position.................................................................................819
Finisher Jogger Kit-A1.....................................................................................................................823
Checking Before Installation...............................................................................................................823
Unpacking Procedure........................................................................................................................ 823
Checking the Contents...................................................................................................................... 824
Installation Procedure........................................................................................................................825
Checking after Installation..................................................................................................................833
Inner Booklet Trimmer-A1............................................................................................................... 835
Checking before Installation............................................................................................................... 835
Checking the Supplied Parts ............................................................................................................. 835
Installation Procedure ....................................................................................................................... 836
Operation Check............................................................................................................................... 855
Booklet Trimmer-G1........................................................................................................................856
Pre-checks........................................................................................................................................856
Unpacking........................................................................................................................................ 858
Checking the Contents...................................................................................................................... 863
Installation Procedure........................................................................................................................864
Two-Knife Booklet Trimmer-B1....................................................................................................... 894
Pre-checks........................................................................................................................................894
Unpacking Procedure........................................................................................................................ 894
Checking the Contents...................................................................................................................... 899
Installation Procedure........................................................................................................................899
Adjustment .......................................................................................................................................906
Two-Knife Booklet Trimmer Conveyor-B1.......................................................................................916
Points to Note at Installation...............................................................................................................916
Checking the Contents...................................................................................................................... 916
Installation Procedure........................................................................................................................916
Revision History...............................................................................................920
Contents
vi

Safety Precautions
Toner Safety..........................................2
Points to Note at Installation................. 2

Toner Safety
About Toner
Toner is a nontoxic matter composed of plastic, iron and a trace of pigments.
CAUTION:
Never throw toner in flames to avoid explosion.
Handling Adhered Toner
• Use dry tissue paper to wipe off toner adhered to skin or clothes and wash in water.
• Never use warm water for cleaning up toner to prevent toner particles from being gelated to soak into fibers permanently.
• Toner particles are reactive with vinyl polymers. Avoid contacting these materials.
Points to Note at Installation
Checking the Installation Environment
1. The environment of the installation site must be in the range as shown below. Avoid installation near the faucet, water boiler,
humidifier or refrigerator.
Guaranteed range for operation/image Temperature: 10.0 to 30.0 deg C, Humidity: 20 to 80%
2. The machine must not be installed near a source of fire or in an area subject to dust or ammonium gas.
If the area is exposed to direct rays of the sun, provide curtains to the window.
3. Be sure to provide adequate ventilation of the room to keep the work environment comfortable. Room odor can be bothering
when running the machine for a long time in a poorly-ventilated room although the ozone amount generated while running
this equipment does not harm human health.
Points to Note Before Servicing
• At servicing, be sure to turn OFF the power source according to the specified steps and disconnect the power plug.
• Be sure to disconnect the power plug on a regular basis and remove dust and dirt accumulated around the outlet with dry
cloth.
CAUTION:
Leaving the power plug connected for a long time in an environment having a lot of dust, moisture, or oily smoke will
cause a fire. (Because dust accumulated in the surrounding area will absorb moisture and cause an insulation failure)
• Be careful not to be injured by burrs of edges, sharp corners or protrusions.
CAUTION:
Hazardous area such as corners, edges, springs and other sharp sections may be remaining on products. Always be
aware of the presence of hazardous area to avoid injury caused by contacting and/or striking those area, by not over-
concentrating on service work.
Safety Precautions
2

Essential Items to Be Performed Before Installation
• Turn OFF the main power of the host machine, and disconnect the power plug from the outlet.
WARNING:
• If performing work without disconnecting the power plug of the host machine, it may cause electrical shock.
• If disconnecting the power plug without turning OFF the main power, it may cause damage of the machine.
• When turning OFF the main power, follow the below procedure.
1. Turn OFF the main power switch of the host machine.
2. The display in the Control Panel and the lamp of the main power are turned off.
Points to Note When Turning ON/OFF the Main Power
The following message is displayed.
1. When a message prompting to turn OFF and then ON the main power appears, turn OFF and then ON the main power
switch.
2. If a message prompting the user to update the version appears, press [Update] to automatically update the version
of this equipment.
If [Skip] is selected, a message prompting the user to update the version will appear every time the host machine is started.
In the service mode (Lv. 2) shown below, it is possible to set not to display the message.
COPIER > OPTION > FNC-SW > VER-CHNG
Safety Precautions
3

Checking the Installation Space
1. Be sure that the feet of the machine are properly set. In addition, be sure to keep the machine horizontal.
2. Be sure to keep 100 mm or more distance from the wall to make enough room for performing the operation.
• When the Copy Tray-R2 is installed
500 mm or more
500 mm
or more
500 mm
or more
2,200 mm or more
2,800 mm or more
1
100 mm or more
NOTE:
*1 Make sure to provide at least 800 mm of space if you attach one or more of the following: Paper Folding Unit-J1, Multi Function
Professional Puncher-B1, Document Insertion Unit-N1, or Multi-drawer Paper Deck-C1.
• When the Booklet Finisher-X1 + Paper Folding Unit-J1 + Multi Function Professional Puncher-B1 + Document Insertion
Unit-N1 + Buffer Path Unit-M1 + Multi-drawer Paper Deck-C1 are installed
500 mm
or more
500 mm
or more
2,900 mm or more
4,900 mm or more
2
800 mm or more 500 mm
or more
NOTE:
*2 Make sure to provide at least 100 mm of space if none of the Paper Folding Unit-J1, Multi Function Professional Puncher-B1,
Document Insertion Unit-N1, or Multi-drawer Paper Deck-C1 is attached.
3. Install the machine in a well-ventilated location.
In a location with a mixture of multiple host machines, be sure to install the machine where the air exhausted from other
machines will not directly enter the machine.
Do not install the machine in the immediate vicinity of any air inlet for room ventilation.
Safety Precautions
4

illustrations
Although pictures or illustrations used for explanationmay differ from the actual things, the procedure is the same.
Description on the parts included in the package
The parts with a diagonal line in the contents list will not be used.
Safety Precautions
5

Product Lineup
1Image Reading System Options........... 7
Function expansion system options......8
Pickup/Delivery System Options.........10

Image Reading System Options
PrinterCover-H2ReaderHeater-P1ADF Access Handle-A1
Product name Required options, conditions, etc.
“Printer Cover-H2” on page 150 Cannot be installed with the DADF.
ADF Access Handle-A1 It is the handle to support opening and closing the Feeder.
“ Reader Heater-P1” on page 169 Option for Reader Unit
1. Product Lineup
7

Function expansion system options
NumericKeypad-A2Licence option
Connection Kit-A4
for Bluetooth LE
Utility Tray-B1
Memory Mirroring Kit-A1
Super G3 FAX Board-AX1
Super G3 2nd Line Fax Board-AX1
Copy Control Interface Kit-A1
Serial Interface Kit-K3
imagePRESS Server M20
Voice Guidance Kit-G1
Voice Operation Kit-D1
250GB SSD-A1
1TB SSD-A1
Copy Card Reader-F1
Copy Card Reader Attachment-A5
Hardware product
Product name Required options, conditions, etc.
“ Connection Kit-A4 for Bluetooth LE” on page 189
“Numeric Keypad-A2” on page 205
“Super G3 FAX Board-AX1” on page 264
“Super G3 2nd Line Fax Board-AX1” on page 272 Super G3 FAX Board-AX1 is required.
“imagePRESS Server M20” on page 301 (imagePRESS Server M20)
“Serial Interface Kit-K3/Copy Control Interface Kit-A1” on page
257
Required when the coin manager is connected.
Using with Copy Card Reader-F1 and Serial Interface Kit-K3 is not
available.
“Serial Interface Kit-K3/Copy Control Interface Kit-A1” on page
257
Required when the coin manager is connected.
Using with Copy Card Reader-F1 and Copy Control Interface Kit-
A1 is not available.
“Voice Guidance Kit-G1” on page 235 Cannot be installed with Utility Tray-B1.
Cannot be installed with Voice Guidance Kit-D1.
“Voice Operation Kit-D1” on page 246 Cannot be installed with Utility Tray-B1.
Cannot be installed with Voice Guidance Kit-G1.
“SSD-related Option” on page 282 It is required when using the mirroring function with Memory Mir-
roring Kit-A1.
“SSD-related Option” on page 282 It is required when using the mirroring function with Memory Mir-
roring Kit-A1.
1. Product Lineup
8

Product name Required options, conditions, etc.
“SSD-related Option” on page 282 When executing the mirroring function, either 250GB SSD-A1 or
1TB SSD-A1 is required.
“Copy Card Reader-F1/Copy Card Reader Attachment-A5” on
page 222
Copy Card Reader Installation Kit-A5 is required.
Using with Serial Interface Kit-K3 and Copy Control Interface Kit-
A1 is not available.
“Copy Card Reader-F1/Copy Card Reader Attachment-A5” on
page 222
Copy Card Reader-F1 is connected.
“Utility Tray-B1” on page 215 Using with Voice Guidance Kit-G1 is not available.
License Products
At the time of installation, obtain the license number according to the license certificate included. Then, enter the obtained license
number from the Control Panel of the machine. applicable functions are enabled.
There is no physically required installation.
Product name Condition
Remote Fax Kit-A1
IP FAX Expansion Kit-B1
PCL Asian Font Set-A1
PCL International Font Set-A1
Barcode Printing Kit-D1
Graphic Arts Package Premium Web Activate
Productivity Package Web Activate
Fiery Compose
Fiery Impose
Fiery JobExpert and PDF Processing KIT
Fiery Impose and Compose
Picture Login-A1
imagePRESS PS Printer Kit-G1 Only the USA model is a standard.
imagePRESS PS Printer Kit-H1 Only the CN model is a standard.
Combination Table of Accessory Installation
NOTE:
The following table shows the combination of accessories installed of the host machine. Before installing the accessories, refer to
the table to check the combination of accessories.
Copy Card
Reader
Voice Opera-
tion Kit
Voice Guidance
Kit
Utility Tray Serial Interface
Kit
Copy Control
Interface Kit
Copy Card Read-
er
- Yes Yes Yes No No
Voice Operation
Kit
Yes - No No Yes Yes
Voice Guidance
Kit
Yes No - No Yes Yes
Utility Tray Yes No No - Yes Yes
Serial Interface
Kit
No Yes Yes Yes - No
Copy Control In-
terface Kit
No Yes Yes Yes No -
Yes: Available No: Unavailable
1. Product Lineup
9

Pickup/Delivery System Options
Long Sheet Tray-B1
Two-Knife Booklet Trimmer Conveyor-B1
Booklet Trimmer-G1Two-Knife Booklet Trimmer-B1
Multi-drawer Paper Deck-E1
- Envelope Feeder Attachment-H1
Puncher Unit-BS1/BT1/BU1
Staple Finisher-AG1
Booklet Finisher-AG1
Stack Bypass Alignment Tray-D1
POD Deck Lite-C1
- Envelope Feeder Attachment-G1
Host machine
- Tab Feeding Attachment-F1
- Envelope Feeder Attachment-F1
- Cassette Heater Unit-38
- Accessory Interface Kit-A2
Multi Function Professional Puncher-C1 Buffer Pass Unit-M1
Document Insertion Unit-R1
Paper Folding Unit-K1
Paper Deck Unit-E1
Paper Deck Heater Unit-A1
Copy Tray-R2
Stack Bypass Alignment Tray-D1
Long Sheet Tray-B1
Long Sheet Tray-B1
Long Sheet Tray-B1
Document Insertion/Folding Unit-K1
Staple Finisher-AC1
Booklet Finisher-AC1
2/3, 2/4, 4 Hole Puncher Unit-A1
Finisher Jogger Kit-A1
Paper Deck Path Kit-B1
Stack Bypass-D1
Long Sheet Tray-B1
Multi-drawer Paper Deck-E1
- Envelope Feeder Attachment-H1
1. Product Lineup
10

Product name Required options, conditions, etc.
Host machine -
Tab Feeding Attachment-F1 (Option for Deck of Host machine)
Envelope Feeder Attachment-F1 (Option for Cassette of Host machine)
“Cassette Heater Unit-38” on page 327 (Option for Cassette of Host machine)
Accessory Interface Kit-A2 Required when the Booklet Finisher-AG1/Staple Finisher-AG1 or the
Multi-drawer Paper Deck-E1 is connected.
“POD Deck Lite-C1” on page 380 Using with Paper Deck Unit-E1 or Multi-drawer Paper Deck-E1 is not
available.
Envelope Feeder Attachment-G1 (POD Deck Lite-C1 option)
“Paper Deck Unit-E1” on page 336 Using with POD Deck Lite-C1 or Multi-drawer Paper Deck-E1 is not
available.
“Paper Deck Heater Unit-A1” on page 364 (Paper Deck Unit-E1 option)
“Multi-drawer Paper Deck-E1” on page 407 Using with Paper Deck Unit-E or POD Deck Lite-C1 is not available.
“Paper Deck Path Kit-B1” on page 479 (Multi-drawer Paper Deck-E1 option)
Envelope Feeder Attachment-H1 (Multi-drawer Paper Deck-E1 option)
“Long Sheet Tray-B1” on page 508 -
“Stack Bypass Alignment Tray-D1” on page 522 -
“Stack Bypass-D1” on page 535 -
“Buffer Pass Unit-M1” on page 556 Necessary when a finisher is connected.
Copy Tray-R2 Using with delivery-related options is not available.
“Buffer Pass Unit-M1” on page 556Document Insertion Unit-
R1
Necessary when a finisher is connected.
Using with Document Insertion / Folding Unit-K1 is not available.
“Document Insertion/Folding Unit-K1” on page 605 Necessary when a finisher is connected.
Using with Document Insertion Unit-R1 is not available.
“Buffer Pass Unit-M1” on page 556Multi Function Professional
Puncher-C1
Necessary when a finisher is connected.
“Paper Folding Unit-K1” on page 639Paper Folding Unit-K1 Necessary when a finisher is connected.
“Buffer Pass Unit-M1” on page 556Staple Finisher-AG1 Using with Booklet Finisher-AG1 is not available.
“Buffer Pass Unit-M1” on page 556Booklet Finisher-AG1 Using with Staple Finisher- AG1 is not available.
“Buffer Pass Unit-M1” on page 556Puncher Unit-BS1 (Booklet Finisher-AG1/Staple Finisher-AG1 options)
“Buffer Pass Unit-M1” on page 556Puncher Unit-BT1
“Buffer Pass Unit-M1” on page 556Puncher Unit-BU1
“Finisher Long Sheet Catch Tray-B1” on page 732Finisher
Long Sheet Catch Tray-B1
(Booklet Finisher-AG1/Staple Finisher-AG1 options)
“Staple Finisher-AC1/ Booklet Finisher-AC1” on page 764 Sta-
ple Finisher-AC1
Using with Booklet Finisher-AC1 is not available.
“Staple Finisher-AC1/ Booklet Finisher-AC1” on page 764
Booklet Finisher-AC1
Using with Staple Finisher-AC1 is not available.
“Buffer Pass Unit-M1” on page 5562/3 Hole Puncher Unit-A1 (Booklet Finisher-AC1/Staple Finisher-AC1 options)
“2/3 2/4 4 Hole Puncher Unit-A1” on page 800
“Buffer Pass Unit-M1” on page 5564 Hole Puncher Unit-A1
“Finisher Jogger Kit-A1” on page 823 (Booklet Finisher-AC1/Staple Finisher-AC1 options)
“Booklet Trimmer-G1” on page 856 Booklet Finisher-AG1 is necessary.
“Two-Knife Booklet Trimmer Conveyor-B1” on page 916 Booklet Finisher-AG1 is necessary.
“Two-Knife Booklet Trimmer-B1” on page 894 Booklet Finisher-AG1 is necessary.
Booklet Trimmer-G1 is necessary.
1. Product Lineup
11