Canon MB5170 User manual

MB5170 在MAC OSX透過無線LAN連線連接印表機之驅動程式步驟（以OSX 10.11 作示範）
MB5170 printer driver Installation Guide for MAC OSX via Wi-Fi (OSX 10.11 as example)
連接打印機至無線網絡路由器
Connect printer to Wi-Fi router
1. 確定印表機已開啟，按主頁（HOME）按鈕（A）
Make sure printer is on, and then press the HOME button (A)
2. 向左或向右滑動螢幕，然後點選 LAN設定（LAN settings）
Flick the screen left or right, and then tap LAN settings
3. 點選 無線LAN設定（Wireless LAN setup）
Tap Wireless LAN setup

4. 點選 標準設定（Standard setup）
Tap Standard setup
5. 點選所用無線路由器
Tap your wireless router
6. 當顯示以下畫面，點選螢幕
When the screen below appeared, tap the screen
如果出現「已連接到無線路由器。（Connected to the wireless router.）」，則網路不需要密
碼。 從步驟 9繼續
If "Connected to the wireless router." appears, the network does not require a
password. Continue from step 9
7. 輸入網路密碼，點選 OK
Enter the network password, and then tap OK

8. 點選 OK
Tap OK
9. 顯示以下螢幕時，請點選 OK
When the screen on the below appears, and then tap OK
點擊以下連結下載有關之驅動程式：
http://ugp01.c-ij.com/ij/webmanual/WebPortal/PTL/ptl-
setup.html?lang=tc&type=setup&area=hk&model=mb51&os=m
Click below link to download printer driver:
http://ugp01.c-ij.com/ij/webmanual/WebPortal/PTL/ptl-
setup.html?lang=en&type=setup&area=hk&model=mb51&os=m

下載及安裝步驟
Download and installation
1. 按一下「下載」。下載完成後開啟該檔案安裝，點擊「Setup」
Click “Download”. Open the file after download is completed, and then click “Setup”
2. 按「下一步」
Click “Next”

3. 輸入登入名稱及密碼 （如出現以下畫面），然後按「安裝軟體」
Enter the login username and password (If this screen is shown below), and then click “Install
Software”
4. 按「開始設定」
Click “Start setup”

5. 選擇「亞洲」＞「香港特別行政區」，按「下一步」
Select “Asia”> “Hong Kong SAR China”, and then click “Next”
6. 按「是」
Click “Yes”

7. 可選擇是否同意作傳送資訊至 Canon
Select “Agree” or “Disagree” to send information to Canon Extended Survey Program
8. 選擇「無線 LAN 連接」，按「下一步」
Select “Wireless LAN Connection”, and then click “Next”

9. 按「下一步」
Click “Next”
10. 確定印表機已開啟及連接網路，按「下一步」
Make sure printer is on and connected to network, and then click “Next”

11. 在「網路上印表機的清單」勾選印表機，按「下一步」
Select printer at “Printers on Network List”, and then click “Next”
12. 等待軟件安裝
Wait for the installation progress

13. 按「新增印表機」
Click “Add Printer”
14. 在新增印表機視窗，選擇印表機 「Canon MB5100 series」（種類為 Bonjour 或Canon IJ
Network），確定「使用」為「Canon MB5100 series」，然後按「加入」
Choose name as “Canon MB5100 series” (Kind: Bonjour or Canon IJ Network), and make sure
“Canon MB5100 series” as in “Use" column, and then click “Add”

15. 再次回到此畫面，按「下一步」
Return to this screen again. Click “Next”
16. 驅動程式安裝完成，安裝軟件請按「下一步」
Driver installation is completed. Click “Next” to install software

17. 在軟體安裝清單勾選所需軟件，按「下一步」
Select needed software, and then click “Next”
18. 可選擇是否同意建立使用者手冊的捷徑
Select “Agree” or “Disagree” to create a user manual shortcut

19. 等待軟件安裝
Wait for the installation progress
20. 按「結束」完成安裝
Click “Finish” to complete the installation
-完-
-End-