Canon CANOSCAN D660U User manual

Carefully remove all items
from the box.
Gently turn the scanner on its side
and unlock the scanner ( ).
Caution! Be sure to unlock the
scanner before plugging in the USB
interface cable. Operating the scanner
while in the locked position may
damage the equipment.
Note: Before you begin, make sure
you’ve turned on the computer and
have quit all applications.
Locate the USB symbol
on your computer and
scanner. Connect the
supplied USB interface cable
to the computer’s USB port.
Note: Multiple USB ports may be
located on the front, side, or back
of your computer.
Connect the other end of the USB
interface cable to the scanner’s
USB port.
Attach the Film
Adapter Unit (FAU)
connector cable to
the FAU connector
on the scanner’s
rear panel.
Connect the AC adapter to
the scanner.
Turn on your computer.
• For Windows setup, go to
Step 4.
• For Macintosh setup, skip to
Step 6.
1Unpacking
2Unlocking the
Scanning Unit
3Connecting the Scanner
1
1
1
Scanner
USB Interface Cable
Getting Started Guide Kit:
• Getting Started Guide
• Canon Software Solutions CD-ROM—
■Macintosh®Plug-in Module:
Scanning software for Macintosh
■PC TWAIN driver: Scanning software
for Windows®
■CanoScan®Toolbox CS (Macintosh)
and ScanGear®Toolbox CS (Windows):
One-click software for easier scanning;
loads software and scans and
prints images
■ScanGear Toolbox FAU: 35 mm
film-scanning software; use with
built-in adapter
■ArcSoft PhotoStudio™2000:
Image editing software
■ArcSoft PhotoBase™: Image
organization software; create
image albums and slide shows
■Caere OmniPage Pro: Text scanning
software (optical character recognition)
■Adobe Acrobat Reader: Software
for viewing scanner manuals in
electronic format
4
5
Warranty Card
Registration Card
2
USB Symbol
AC Adapter
3
PC Connection
Macintosh
Connection
6
FAU Cable
and Connector

When you see
this dialog box,
insert the
Software
Solutions CD-
ROM. Click Next.
Note: If you don’t see this dialog box
or accidentally close it, unplug the USB
cable and then reconnect it.
Select “Search
for the best
driver...”.
Click Next.
Select CD-
ROM drive.
Click Next.
Click Next.
Click Finish.
When you
see this
dialog box,
click Install
the Software.
Click Start Installation.
Follow the on-screen instructions.
Restart your computer.
Step 1:Placing the Image
Open the document cover.
Place your picture face down
on the glass of your scanner. Line
up the top of your image with the
arrow on the scanner bed.
Close the document cover.
Step 2:Scanning the Image
Press the scanner’s Start button.
Select Scan
and Save
the Image.
Click Next.
Click Next.
Select Expert
Scanning Click
Next.
5Your First Scan
for Windows
4Installing the Scanner
Software for Windows®
1
6
7
2
3
4
5
8
9
1
3
1
2
2
3
4

Click the Preview button.
Use the mouse to draw a box
around the portion of the image you
want to scan.
Click the Scan button.
To scan another image, or to scan
the current image at a different
resolution, repeat Steps 1- 7.
Step 2:Viewing Scanned Images
Double-click each of the following:
a. My Computer on the desktop
b. C: drive icon
c. My Documents folder
d. My Pictures folder
e. Save0001 file
The Windows Paint program opens
and displays the scanned image.
• For film scanning operation, go to
Step 8.
• For scanner tips, go to Step 9.
Insert the Software Solutions
CD-ROM into your CD-ROM drive.
Note: If the CanoScan Setup Utility
does not start automatically, double-
click the CD-ROM icon, then the
Setup icon.
Click the Install the Software button.
Click the Start Installation button.
Finish the installation by following
the on-screen instructions.
After all applications have installed
successfully, click the Quit button.
When prompted, restart
your computer.
6Installing the Scanner
Software for Macintosh®
3
2
6
1
2
3
5
7
1
8
4
5
6

Step 1:Placing the Image
Open the document cover.
Place your picture face down on the
glass of your scanner. Line up the
top of your image with the arrow on
the scanner bed.
Close the document cover.
Step 2:Scanning the Image
Press the scanner’s Start button.
Select Scan and Open the Image in
Toolbox editor. Click Next.
Select Expert Scanning. Click Next.
Click the Preview button.
Use the mouse to draw a box
around the portion of the image
you want to scan.
Slide the Resolution bar to:
• 200 dpi—for an inkjet printer
• 72 dpi—for e-mail or Web
Click the Scan button.
In the File menu, select Save.
To scan another image, or to scan
the current image at a different
resolution, repeat Steps 1- 8.
7Your First Scan
for Macintosh
1
2
3
1
2
3
6
7
8
5
9
4

Remove the protective sheet
from the Film Adapter Unit.
Open the clip on the film
guide by inserting a
fingertip in the indent
and pressing inward while
gently lifting it up.
Place the film
face down in
the film guide’s
groove.
Align the tabs on the clip with the
corresponding indent in the film
guide and press gently inward on
the clip while pushing them down
into place.
Place the loaded film
guide on the glass of
your scanner in the
correct position.
Close the document cover.
Press the Film
Scan Start but-
ton and follow
the on-screen
instructions.
Register your product via the Web
at: www.ccsi.canon.com/register
Go to www.canoscan.com for help-
ful tips on scanning for e-mail
attachments, cropping an image,
adjusting dots per inch, and more!
View electronic manuals by
reinserting the Software Solutions
CD-ROM and clicking View the
Electronic Manuals.
Canon Technical Support
Canon Scanners
Canon Computer Systems, Inc. offers a full range of
customer technical support* options:
• For e-mail technical support, the latest driver downloads
and answers to frequently asked questions
(www.ccsi.canon.com)
•24-hour, 7-day-a-week automated support for
troubleshooting issues on most current products
(1-800-423-2366)
•24-hour, Fax-On-Demand System for product specifica-
tions and technical information (1-800-526-4345)
• Free technical support Monday–Saturday (excluding
holidays) for products still under warranty**
(1-757-413-2848)
• Technical support 7days a week (excluding holidays) for
products no longer under warranty, for $24.99 per call
(1-800-423-2366), or for $2.50 per minute, to a maxi-
mum of $25.00 per call (1-900-246-1200)
NOTE: Within Canada, call for technical support 24 hours
a day, 7days a week (1-800-OK-CANON).
*Support program specifics subject to change without notice.
**Refer to individual product information for warranty details.
For more information about Canon Products, call
1-800-OK-CANON or visit our Web site at:
www.ccsi.canon.com
Canon Computer Systems, Inc.
2995 Redhill Avenue • Costa Mesa, California 92626 U.S.A.
©2000 Canon Computer Systems, Inc. Canon, CanoScan and ScanGear are registered
trademarks of Canon Inc. Canon Print Planet is a service mark of Canon Computer
Systems, Inc.All other products and brand names are trademarks of their respective owners.
35-36257-0500
2
1
2
8Scanning Film 9Registering, Getting Help
and Accessing Manuals
1
3
4
3
6
5
7
EENNEERRGGYYSSTTAARR®®CCoommpplliiaanntt

IMPORTANT
Follow the steps in this Getting
Started Guide to unpack and set
up your new CanoScan Scanner.
Getting
Started
Guide
USB Flatbed Scanner
CanoScan®
D660U