Canon image Formula DR-C130 User manual

Chapter 1 Introduction
Chapter 2 Important Safety
Instructions
Chapter 3 Installing the
Software
Chapter 4 Connecting the
Scanner
Chapter 5 Placing
Documents
Chapter 6 Scanning with
CaptureOnTouch
Chapter 7 Scanning with
CapturePerfect
Chapter 8 Setting the
Scanner Driver
Chapter 9 Special Scanning
Chapter 10 Regular
Maintenance
Chapter 11 Removing and
Attaching the Rollers and
Document Holding Guide
Chapter 12 Uninstalling the
Software
Chapter 13
Troubleshooting
Chapter 14 Appendix
CE-IM-880-
E1.00

HOME > Chapter 1 Introduction

Chapter 1 Introduction
Thank you for purchasing the Canon imageFORMULA DR-C130
Document Scanner.
In order to fully understand the features of this scanner and use them
more effectively, please read this manual and the manuals shown
below thoroughly before using the product. After reading, store the
manual in a safe place for future reference.
"About This Manual"
"Features of the Scanner"
"Names and Functions of Parts"
"Regulations"
"Trademarks"

HOME > "Chapter 1 Introduction" > About This Manual

About This Manual
Manuals for the Scanner
Documentation for this scanner consists of the following manuals.
● Setup Guide
This provides complete and comprehensive information about
the scanner.
● User Manual (this manual)
This manual contains complete explanations for operations on
the scanner. This manual is stored on the supplied Setup Disc as
a electronic manual.
The User Manual will be registered to the following location in the
start menu after you install the software on the Setup Disc.
Symbols Used in This Manual
The following symbols are used in this manual to explain
procedures, restrictions, handling precautions, and instructions that
should be observed for safety.
Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use
the machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to
injury to persons, or damage to property if not performed
correctly. To use the machine safely, always pay attention to
these cautions.

HOME > "Chapter 1 Introduction" > Features of the Scanner

Features of the Scanner
The main features of the DR-C130 document scanner are
described below.
● Compact Size
The dimensions of the scanner are as follows: 298 mm (W) x
160 mm (H) x 160 mm (W) (11.7" x 6.3" x 6.3") (with the feed
tray and eject tray closed) .
The size of the scanner with the feed tray and eject tray open is
298 mm (W) x 245 mm (H) x 490 mm (W) (11.7" x 9.8" x 19.5").
● Fast Document Feeding
Documents can be scanned at a speed of up to 30 pages per
minute (when scanning one-sided or two-sided documents of A4
size at 200 dpi).
● High Image Quality
The 600 dpi optical resolution sensor incorporated in the scanner
enables documents to be scanned with high image quality.
● Eject Tray
The eject tray enables scanned documents to be stacked. Open
the eject tray when scanning documents that are not output
smoothly. Scanned documents can be output without opening
the eject tray.
● USB 2.0 Interface
The scanner supports Hi-Speed USB 2.0.
● Color/Grayscale Support
Documents can be scanned in 24-bit color or 256-level
grayscale.
● Supports a Variety of Scanning Modes
The scanner supports the following scanning modes, depending
on the document type.
- Simplex and Duplex scanning (with Skip Blank Page function)
- Continuous or single-page feeding
● Card Scan
You can scan business or ID cards.
● Paper Size Detection
The scanner automatically detects the size of a scanned
document and eliminates any unnecessary space around the
edges of the image when storing the image, even when storing a
document of irregular size.
● Auto Color Detection
The scanner detects whether the scanned document is in color,
grayscale, or black and white (binary), and saves the image
accordingly.
● Full Auto Mode

HOME > "Chapter 1 Introduction" > Names and Functions of Parts

Names and Functions of Parts
This section describes the name and function of each part.
Make sure to read this section and familiarize yourself with
the parts of the scanner before using the scanner.
Front View/Right-Side View
(1) Document Feed Tray
Open to place documents. -> "Preparing the Document Feed
Tray"
(2) Document Eject Area
Scanned documents are output here.
(3) Stop Button
Press this button to stop scanning before it is complete or to end
panel-feeding.
(4) Start Button
Press this button to start scanning. Its function can be assigned
with CaptureOnTouch.
(5) Power Button
Press this button to turn the scanner ON and OFF.
(6) Power Indicator
This indicator lights blue when the scanner is turned ON.
Front View (With the Document Feed Tray and Eject Tray
Open)

HOME > "Chapter 1 Introduction" > Regulations