Caple C876I User manual

Instruction manual for induction hob
Model code: C876I
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk

Dear customers,
Congratulations on your purchase of a Caple induction hob.
In order to make the best use of your appliance, please carefully read the following use and care
manual and keep it for reference.

SUMMARY
SAFETY......................................................................................................................................... 4
P RECAUTIONS BEFORE USING ........................................................................................................ 4
U SING THE APPLIANCE .................................................................................................................. 5
P RECAUTIONS NOT TO DAMAGE THE APPLIANCE .............................................................................. 6
P RECAUTIONS IN CASE OF APPLIANCE FAILURE ................................................................................ 7
O THER PROTECTIONS ................................................................................................................... 7
ENVIRONMENTAL PROTECTION ............................................................................................... 8
CE DECLARATIONS OF CONFORMITY...................................................................................... 8
WARRANTY .................................................................................................................................. 8
DESCRIPTION OF THE APPLIANCE........................................................................................... 9
T ECHNICAL CHARACTERISTICS ....................................................................................................... 9
C ONTROL PANEL ........................................................................................................................ 10
USE OF THE APPLIANCE.......................................................................................................... 10
D ISPLAY .................................................................................................................................... 10
V ENTILATION .............................................................................................................................. 10
STARTING-UP AND APPLIANCE MANAGEMENT ................................................................... 11
B EFORE U SING Y OUR N EW I NDUCTION H OB ................................................................................. 11
H OW I NDUCTION W ORKS ............................................................................................................ 11
T OUCH C ONTROL ....................................................................................................................... 11
P OWER SELECTION ZONE “SLIDER” AND TIMER SETTING ZONE ...................................................... 11
R ESIDUAL HEAT INDICATION ........................................................................................................ 11
P AN DETECTION ......................................................................................................................... 12
S TARTING - UP ............................................................................................................................. 12
B OOSTER FUNCTION ................................................................................................................... 12
T IMER ....................................................................................................................................... 13
A UTOMATIC COOKING ................................................................................................................. 14
P AUSE FUNCTION ....................................................................................................................... 14
R ECALL FUNCTION ...................................................................................................................... 14
B RIDGE FUNCTION ...................................................................................................................... 15
“K EEP WARM ” FUNCTION ............................................................................................................. 15
C ONTROL PANEL LOCKING ........................................................................................................... 15
COOKING ADVICE ..................................................................................................................... 16
C HOOSING THE R IGHT C OOKWARE .............................................................................................. 16
P AN DIMENSION .......................................................................................................................... 16
E XAMPLES OF COOKING POWER SETTINGS .................................................................................... 17
MAINTENANCE AND CLEANING .............................................................................................. 17
TROUBLESHOOTING................................................................................................................. 17
INSTALLATION INSTRUCTIONS............................................................................................... 20
ELECTRICAL CONNECTION ..................................................................................................... 22

4
SAFETY
Precautions before using
•Unpack the hob and all associated components, taking care not to
lose or mishandle any parts.
•The appliance must be installed by a suitably qualified professional
and connected to the electricity supply by a qualified electrician
who will comply with the local regulations. The manufacturer cannot
be held responsible for damage caused by wrong installation or
connection.
•The appliance must be installed in a purpose-designed kitchen unit
and worktop cut out as specified below.
•This hob has been designed for use only as a domestic cooking
appliance. Any other use is potentially dangerous and will invalidate
the guarantee.
•Remove all labels and other packaging materials from the ceramic
surface prior to use.
•Do not modify the appliance in any way as this will invalidate the
guarantee and is potentially dangerous.
•The hob must not be used as a freestanding appliance or as a
worktop.
•This appliance must be connected to the electricity supply
according to the local regulations. It must be suitably earthed.
•Do not use any extension cable to connect the hob.
•This appliance must not be installed above a dishwasher or tumble
dryer as steam may damage the electronic components.
•This appliance must not be controlled by external tools like
separate timer or separate remote control system.

5
Using the appliance
•Always switch cooking zones off after use.
•Take particular care when cooking with oils or fats that may ignite.
•Cooking pans and ustensils and the hob itself become hot during
use. Caution, risk of injury to people and pets both during and after
use.
•Ensure no cable from any other appliance can come into contact
with the hob top or pans during use.
•Magnetic objects (such as credit cards, portable electronic devices;
etc.) must not be placed near the appliance during use.
•Metal objects such as knives, forks, lides etc. must not be placed
on the hob as they may become hot.
•Don’t place any other metallic object than suitable pans on the hob.
In case of untimely activation or residual heat, metallic object may
become hot, melt or even burn.
•Never cover the hob with any cloth or other cover. This may
become hot and create a fire hazard.
•This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
•Children shall not play with the appliance.
•Cleaning and user maintenance shall not be made by children
without supervision.

6
Precautions not to damage the appliance
•Use of damaged pans or those with raw cast iron bottoms may
damage the hob ceramic glass.
•Abrasive materials such as scouring cleaners and grits may
damage the ceramic glass.
•Avoid dropping objects onto the ceramic glass.
•Take care not to strike the edges of the hob with saucepans.
•Ensure that ventilation remains free from obstructions and complies
with instructions specified by the manufacturer.
•Do not place empty saucepans on the hob.
•Sugar, synthetic materials or aluminium foil must not come into
contact with the heating zones. These may cause permanent
damage to the ceramic. If these should accidentally fall onto the
hob, turn it off immediately and carefully remove them. Take care
not to burn yourself.
•WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
•CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
•WARNING: Danger of fire: do not store items on the cooking
surface.
•Never place any hot items on the control panel.
•If a drawer is located below the hob, ensure that a minimum air gap
of at least 4 cm is left between the drawer contents and the base of
the hob. This is essential to guarantee correct ventilation. A
horizontal divider made of material capable of withstanding 65°C
above ambient temperature can be used to ensure this air gap.
•Never place inflammable items or materials (like sprays) in a
drawer or cupboard below the hob. Cutlery drawers must be
resistant to heat.

7
Precautions in case of appliance failure
•If a fault is noticed, switch off the appliance and turn off the
electricity supply.
•There are no user-serviceable parts inside the appliance. Don’t
open the appliance by yourself. All repairs must be performed by a
suitably qualified service engineer or similar.
•WARNING: If the ceramic glass is broken or cracked, don’t use the
appliance and turn off the electricity supply to avoid the possibility
of electric shock. Contact after-sales service.
•See the troubleshooting section in this manual.
Other protections
•Ensure that each pan is well centred on its cooking zone. The pan
base must cover as much of the cooking zone as possible.
•For those with heart pacemakers or active implants, the magnetic
field could influence its operating. You should obtain information
from the retailer or your attending physician.
•Do not use aluminium or plastic containers: they could melt onto
hot cooking zones.
•NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
THE USE OF INCORRECT COOKWARE OR ANY INDUCTION
ADAPTOR PLATE DESIGNED FOR NON-MAGNETIC
COOKWARE WILL INVALIDATE THE GUARANTEE. THE
MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR
ANY DAMAGE TO THE HOB AND/OR ITS ENVIRONMENT
AS A RESULT OF SUCH USE
.

8
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is
marked according to the European directive on Waste Electrical and Electronic Equipment
(WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The symbol on the product indicates that this
product may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. Disposal must be carried
out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local council, your household waste disposal service or the retailer where you
purchased the product.
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all applicable
legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
WARRANTY
Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you
must provide the following information to your retailer in order to receive a replacement: date of
purchase, model and serial number. Registration can also be completed online by visiting
www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together
with proof of purchase.
If you fail to show your warranty card you will incur all repair charges. Spare parts are only
available from Caple Service and spare parts authorised centres.

9
DESCRIPTION OF THE APPLIANCE
Technical characteristics
Typ
e
C876I
Total power
7100
W
Energy consumption for the hob EC
hob
**
176.
9
Wh/kg
Front
left
heating zone
Ø 19
0 mm
Minimum detection
Ø 90 mm
Nominal power*
1400 W
Booster power*
2000 W
Standardised cookware category**
B
Energy consumption EC
cw
**
177
.
3
Wh/kg
Rear
left
heating zone
Ø 1
9
0 mm
Minimum detectio
n
Ø
9
0 mm
Nominal power*
1400
W
Booster power*
-
Standardised cookware category**
B
Energy consumption EC
cw
**
177
.
3
Wh/kg
Rear
right
heating zone
Ø 2
20
mm
Minimum detection
Ø 10
0 mm
Nominal power*
23
00 W
Booster power*
3
000 W
Standardised cookw
are category**
C
Energy consumption EC
cw
**
171.
1
Wh/kg
Front
right
heating zone
Ø
175
mm
Minimum detection
Ø
90
mm
Nominal power*
1
400 W
Booster power*
-
Standardised cookware category**
A
Energy consumption EC
cw
**
181.
9
Wh/kg
* The given power may change according to the dimensions and material of the pan.
** calculated according to the method of measuring performance (EN 60350-2).

10
Control panel
USE OF THE APPLIANCE
Display
Display Designation Function
0 Zero The heating zone is activated.
1…9 Power level Selection of the cooking level.
U Pan detection No pan or inadequate pan.
A Heat accelerator Automatic cooking.
E Error message Electronic failure.
H Residual heat The heating zone is hot.
P Booster The boosted power is activated.
L Locking Control panel locking.
U Keep warm Maintain automatically of 70°C.
II Pause The hob is in pause.
∏Bridge 2 cooking zones are combined.
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation will run at high speed
when the hob is intensively used. The cooling fan reduces speed and stops automatically when
the electronic circuit is cooled enough.
Keep warm key
Booster
key
Pause/Recall
key
Control light
cooking zone
Control light timer
Timer display
Power selection zone “SLIDER” and
timer setting zone
Control light
Pause/Recall
Power display
Control light
on/off
On/Off key

11
STARTING-UP AND APPLIANCE MANAGEMENT
Before Using Your New Induction Hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent, as
this risks causing blue-tinted colour on the glass surface.
How Induction Works
An induction coil is located under each heating zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. As a result, the pan will heat up.
Of course the pan has to be adapted:
•All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron
and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…
•Are excluded: copper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,…
The induction heating zone is able to automatically detect the size of a pan. If the base diameter
of the pan is too small and therefore fails to adapt to the induction hob, the display will show [ U].
Touch Control
Your induction hob is equipped with electronic controls with touch control keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a “beep” sound.
For general use, ensure only one button is pressed at any time.
Power selection zone “SLIDER” and timer setting zone
To select the power with the slider, slide your finger on the “SLIDER” zone. You can already have
a direct access if you put your finger directly on the chosen level.
Residual heat indication
After a heating zone or the entire hob is switched off, the heating zones are still hot and indicate
[ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
While the residual heat indicator light is on, don’t touch the heating zones and don’t put any heat
sensitive object on them. There are risks of burn and fire.
Power selection zone “SLIDER” and
timer setting zone
“SLIDER“
Direct access

12
Pan detection
The pan detection feature ensures safety. The induction doesn’t work:
•If there is no pan on the heating zone or if the pan is not adapted to the induction. In this
case, it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a suitable pan is put on the heating zone.
•If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Starting-up
•Start-up / switch off the hob:
Action Control panel Display
To start Press key [ ] [ 0 ] are blinking
To stop Press key [ ] Nothing or [ H ]
•Start-up / switch off a heating zone:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
To set Slide on the “SLIDER“ [ 0 ] to [ 9 ]
(adjust the power) to the right or to the left
To stop Slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
or press on [ 0 ] [ 0 ] or [ H ]
If no action is made within 20 seconds, the electronics returns in waiting position.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra-high power.
The booster is used for example, to rapidly heat up big quantities of water.
•Start-up / Stop the booster function:
Action Control panel Display Zone
Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on
Start up the booster Press key [ ] [ P ]
Stop the booster Slide on the “SLIDER“ [ P ] to [ 0 ]
or press on [ P ] [ 9 ]
•Power management:
If the selected heating levels for both zones exceed the maximum available amount of power, the
power management function will automatically reduce the power from one of these zones. The
display of this zone will blink first; the level is then automatically reduced to the highest suitable
position.
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone

13
Timer
The timer can be used with all heating zones simultaneously and with different time settings
(from 0 to 99 minutes) for each heating zone.
•Setting and modification of the cooking time:
Example for 16 minutes at power 7:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Select the power level Slide on the “SLIDER“ to [ 7 ] [ 7 ]
Select « Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 6 ] [ 0 fixed ] [ 6 blinking ]
Valid the units Press display [ 06 ] [ 0 blinking ] [ 6 fixed ]
Set the tens Slide on the “SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 fixed ]
Valid the tens Press display [ 16 ] [ 16 ]
The time is confirmed and the timer starts.
•To stop the cooking time:
Example for 13 minutes at power 7:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Select « Timer » Press key [ 13 ] [ 13 ]
Deactivate the units Slide on the “SLIDER“ to [ 0 ] [ 1 fixed ] [ 0 blinking ]
Valid the units Press display [ 10 ] [ 1 blinking ] [ 0 fixed ]
Deactivate the tens Slide on the “SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 fixed ]
Valid the tens Press display [ 00 ] [ 00 ]
•Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Example for 29 minutes:
Action Control panel Display
Activate the hob Press display [ ] Zone control lights are on
Select« Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 9 ] [ 0 fixed ] [ 9 blinking ]
Valid the units Press display [ 09 ] [ 0 blinking ] [ 9 fixed ]
Set the tens Slide on the “SLIDER“ to [ 2 ] [ 2 blinking ] [ 9 fixed ]
Valid the tens Press display [ 29 ] [ 29 ]
After a few seconds the control light stops blinking.
The time is confirmed and the timer starts.
•Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].

14
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, and then automatically reduces its power on the pre-selected
level.
•Start-up:
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Full power setting Slide on the “SLIDER“ to [ 9 ] Pass from [ 0 ] to [ 9 ]
Automatic cooking Re-press on display “SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ]
Power level selection Slide on the “SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example “ 7 “) [ 7 ] is blinking with [ A ]
•Switching off the automatic cooking:
Action Control panel Display
Zone selection Press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection Slide on the “SLIDER“ [ 1 ] to [ 9 ]
Pause function
This function brakes all the hob’s cooking activity temporarily and allows you to restart with the
same settings.
•Startup/stop the pause function:
Action Control panel Display
Engage pause Press [ ] during 2s Displays [ II ] in the
heating zone displays
Stop the pause Press [ ] during 2s Pause control light is
blinking
Press another touch or Pause control light is off
slide on the “SLIDER“
Recall function
After switching off the hob ( ), it is possible to recall the last settings.
•Cooking stages of all cooking zones (power)
•Minutes and seconds of programmed cooking zone-related timers
•Heat up function
The recall procedure is following:
•Press the key [ ]
•Then press the key [ ] within 6 seconds
The precedent settings are activated.

15
Bridge function
This function allows to use the 2 cooking zones at the left at same time with the same features as
a single cooking zone. Booster function isn’t allowed.
Action Control panel Display
Activate the hob Press display [ ] [ 0 ] or [ H ] on the
4 displays
Activate the bridge Press on the 2 left cooking zones [ 0 ] appears on the front
zone
[ ∏] on the rear zone.
Increase bridge Slide on the “SLIDER “ [ 1 to 9 ] or [ U ]
Stop the bridge Press on the 2 cooking zones links [ 0 ] or [ H ] on the 2 zones
“Keep warm” function
This function allows you to reach and automatically maintain the temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
•To engage, to start the function « Keep warm » :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]
To engage Press between 0 and 1 on the [ U ]
“SLIDER”
To stop Press between 0 and 1 selected [ U ]
Slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
This function can be started independently on all the heating zones.
When the pan leaves the cooking zone of the "Keep warm" function remains active during
approximately 10 minutes.
The maximum duration of keep warm is 2 hours.
Control panel locking
To avoid modifying a setting of cooking zones, in particular during of cleaning the control panel
can be locked (with exception to the On/Off key [ ]).
•Locking:
Action Control panel Display
Start Press on key [ ] [ 0 ] or [ H ] on the
displays
Hob locking Press simultaneously [ ] and [ 0 ] No modification
from the front right zone display
Re-press on display [ 0 ] [ L ] on the displays
•Unlocking:
Action Control panel Display
Start Press on key [ ] [ L ] on the displays
In the 5 seconds after start:
Unlocking the hob Press simultaneously [ ] and [ 0 ] or [ H ] on the
displays [ L ] from the front right zone display
Press on key [ ] No light on the displays

16
COOKING ADVICE
Choosing the Right Cookware
Adapted materials: steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
Non-adapted materials: aluminium and stainless-steel without ferromagnetic bottom,
copper, brass, glass, ceramic, porcelain.
Look for the induction symbol on the packaging or on the bottom of the pan.
To check if pans are compatible:
•Put some water in a pan placed on an induction heating zone set at level [ 9 ]. If [ U ] does
not appear and the water is heating, the pan is suitable.
•Move a magnet towards the base of the pan. If it is attracted and sticks to the pan, the pan
is suitable.
Certain pans can make noise when they are placed on an induction cooking zone. This noise is
normal and does not affect the cooking operation, nor does it mean a failure in the appliance.
Do not use cookware with jagged edges or a curved base.
To avoid scratching the glass, always lift pans off the hob - do not slide
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However, the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone (see table on page 9 for the minimum pan diameter for each cooking
zone).
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.

17
Examples of cooking power settings
(the values below are indicative)
1 to 2 Melting
Reheating
Sauces, butter, chocolate, gelatine
Dishes prepared beforehand
2 to 3 Simmering
Defrosting
Rice, pudding, sugar syrup
Dried vegetables, fish, frozen products
3 to 4
Steam
Vegetables, fish, meat
4 to 5 Water Steamed potatoes, soups, pasta,
fresh vegetables
6 to 7 Medium cooking
Simmering
Meat, lever, eggs, sausages
Goulash, roulade, tripe
7 to 8
Cooking
Potatoes, fritters, wafers
9 Frying, roosting
Boiling water
Steaks, omelettes, fried dishes
Water
P Frying, roosting
Boiling water
scallops, steaks
Boiling
significant quantities of water
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot due to risk of burns.
•Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse
with cold water and dry the surface thoroughly.
•Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be
absolutely avoided.
•Do not use any steam-cleaner or pressure washer.
•Do not use any object that may scratch the ceramic glass.
•Ensure that the pan is dry and clean. Ensure that there are no grains of dirt on your ceramic hob
or on the pan. Sliding rough saucepans will scratch the surface.
•Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface
being damaged.
TROUBLESHOOTING
The hob or the cooking zone doesn’t start-up:
•The hob is badly connected on the electrical network.
•The protection fuse cut-off.
•The looking function is activated.
•The sensitive keys are covered of grease or water.
•An object is put on a key.
The control panel displays [ U ]:
•There is no pan on the cooking zone.
•The pan is not compatible with induction.
•The bottom diameter of the pan is too small.
The control panel displays [ E ]:
•Call the After-sales Service.

18
a
d
c
b
The control panel displays [ L ]:
•Refer to the chapter control panel locking page.
One or all cooking zone cut-off:
•The safety system functioned.
•You forgot to cut-off the cooking zone for a long time.
•One or more sensitive keys are covered.
•The pan is empty and its bottom overheated.
•The hob also has an automatic reduction of power level and breaking Automatic
overheating.
Continuous ventilation after cutting off the hob:
•This is not a failure, the fan continuous to protect the electronic device.
•The fan cooling stops automatically.
The automatic cooking system doesn’t start-up:
•The cooking zone is still hot [ H ].
•The highest power level is set [ 9 ].
The control panel displays [ U ]:
•Refer to the chapter “Keep warm“.
The control panel displays [ II ]:
•Refer to the chapter “Pause“.
The control panel displays [ ∏]:
•Refer to the chapter “Bridge“.
When the symbol [ E 4 ] appears:
•The table must be reconfigured. Please implement the following steps:
I) Important: before you start, make sure there is no more pot on the hob.
II) Disconnect the appliance from the grid by removing the fuse or turning the circuit
breaker off.
III) Reconnect the table to the grid.
IV) Procedure:
* take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm.
* start the procedure within 2 minutes after reconnecting the hob to the grid.
* don’t use the [ ] touch.
V) First step: cancel the existing configuration.
1) Press the touch n°2 and hold down.
2) The symbol [ - ] will appear on each display.
3) With your other hand, press successively and
quickly (less than 2s) on each [ - ] display.
Begin from the front right side and turn contrary
clockwise, as described on the picture (from a to
d).
A double "beep" means an error occurred. If so, start again from item 1).
4) Remove your fingers from the touch control, then push again on touch 1 during few
seconds, until blinking [ E ] symbols appear.
5) Wait until [ E ] symbols stop blinking.
6) After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup
has been cancelled.

19
VI) Second step: new setup.
1) Take a ferromagnetical pot with a minimum diameter of 16 cm.
2) Select a cooking zone by pushing on the corresponding [ C ] display.
3) Place the pot on the area to be set.
4) Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now
configured.
5) Follow the same procedure for each cooking zone with a [ C ] display.
6) All the cooking zones are configured once all the displays are turned off.
Please use the same pot for the whole procedure.
Never put several pots together on the zones during the setup-process.
•If [ E 4 ] displaying remains, please call the customer care.
The control panel displays [ ] or [ Er03 ]:
•An object or liquid covers the control keys. The symbol disappears as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ E H ]:
•The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ]:
•The pan is not adapted, change the pan.
The control panel displays [ E6 ]:
•Defective network. Control the frequency and voltage of the electrical network.
The control panel displays [ E8 ]:
•The air inlet of the ventilator is obstructed, release it.
The control panel displays [ E C ]:
•Configuration error. Set the table again, referring to the chapter "The [E 4] appears".
If one of the symbols above persists, contact Caple Service.
T - 0117 938 7420
E - s[email protected].

20
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforced in their country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
Installation has to be done carefully, in conformity with the following drawing.
Fitting - installing:
•The cut-out sizes and flush mounting:
Glass
Cut size
Rear
Side
Radius
Cut size
Deep
A1
B1
C
D
E
F
H
A2
B2
G
380
900
3
6
0
8
8
0
50
40
8
386
906
5
•Ensure that there is a distance of 50mm between the hob and the wall or sides.
•The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
at one side. On the other side, however, no unit or divider must stand higher than
the hob.
•The piece of furniture or the support in which the hob is to be fitted, as well as the edges of
furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100°C.
•The mural rods of edge must be heat-resisting.
•Not to install the hob to the top of a not ventilated oven or a dishwasher.
•There must be a space of 20mm beneath the bottom of the hob casing to ensure a good
air circulation of the electronic device. (See page 21 for full ventilation information)
•If a drawer is placed under the worktop, avoid placing flammable objects (for example:
sprays) or not heat-resistant objects inside.
•Materials which are often used to make worktops, expand on contact with water. To
protect the cut-out edge, apply a coat of varnish or special sealant. Particular care must be
given to applying the adhesive joint supplied with the hob to prevent any leakage into the
supporting furniture. This gasket guaranties a correct seal when used in conjunction with
smooth work top surfaces.
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection sheet (3).