CareCo Airrex LT Self-propelled User manual

PAGE 1
CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE
by
USER MANUAL
PRODUCT CODES
SELF PROPELLED WC01061 | TRANSIT WC02059
and

PAGE 2
INFORMATION
Thank you for purchasing a wheelchair from I-GO. This I-GO wheelchair has been
designed and manufactured to meet our own high standards and specications.
We hope you are happy with your purchase.
Please ensure you read this manual carefully. It contains important information on
the safe use and maintenance of your I-GO wheelchair.
Your I-GO wheelchair requires frequent maintenance. While much of this can be
done yourself, we recommend that you have your wheelchair inspected once per
year by an expert.
Please note: We are continuously improving the quality and reliability of our products,
and therefore reserve the right to amend this manual without proper notication.
Suggestion: Information
Warning: Follow these instructions to avoid personal injury

PAGE 3
CONTENTS
1. GENERAL OVERVIEW OF YOUR WHEELCHAIR
1.1 Components of the wheelchair
1.2 Explanation of the function and possibilities of your wheelchair
2. SAFETY REGULATIONS
2.1 General safety guidelines
2.2 Warnings for safe use
3. USER INSTRUCTIONS
3.1 Safety tips
3.2 Negotiating pavements and uneven surfaces
3.3 Going up and down ramps
3.4 Going up and down stairs
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
4.1 Technical specications
4.2 Unfolding and folding the wheelchair
4.3 Use of the footrest
4.4 Using the brake
4.5 Use of armrests
4.6 Use of the rear wheels
4.7 Tyres Information
4.8 Use of the folding backrest
4.9 Using accessories with your wheelchair
5. TRANSPORT AND TRANSIT IN CAR
6. MAINTENANCE
6.1 Tyres
6.2 Brakes
6.3 Cross frame
6.4 Rear wheels
6.5 Front wheel and front castor fork
6.6 Upholstery
6.7 Cleaning
7. PROBLEM ANALYSIS AND SOLUTIONS
8. WARRANTY
9. SERVICE & MAINTENANCE
1
2
4
7
14
15
17
18
19

PAGE 1
1. GENERAL OVERVIEW OF YOUR WHEELCHAIR
1. Height adjustable
armrest
2. Footrest
3. Cross frame
4. Heel strap
5. Footplate
6. Front wheel
7. Front fork
8. Bearing house
9. Stepper
10. Brake
11. Hand rim
12. Rear wheel
13. Fixation lever for
foldable backrest
14. Push handle
2
4
1
5
6
73
9
10
12
13
14
11
1.1 Components of the wheelchair
You should be aware of each of the elements and parts that make up your wheelchair
before you continue reading this manual. Please note: Specications and designs may
be changed without prior notice.
Please Note that the Airrex LT Transit version features assistant brakes.
Your wheelchair is equipped with a number of elements and parts. You should know
these before continue reading this manual. Designs and specications may change
without prior notice.
8

PAGE 2
1. GENERAL OVERVIEW OF YOUR WHEELCHAIR
Warning
To guarantee safe use, ensure your wheelchair is kept in good
working condition.
2. SAFETY REGULATIONS
1.2 Explanation of the function and possibilities of your wheelchair
This I-GO wheelchair is a foldable model and is designed to be easy to transport. This
is a medical equipment product and not a standard consumer product. We therefore
recommend that you follow this manual to ensure proper use of your wheelchair.
2.1 General safety guidelines
Check your I-GO wheelchair regularly. Dangerous situations can occur when a part of
your wheelchair is not functioning properly.
2.2 Warnings for safe use
I-GO disclaims any responsibility for any injury or property damage which occurs as a
result of any use which does not comply with laws or ordinances. When used correctly
this I-GO wheelchair is a safe and stable product. However, incorrect use can result in
injury to the user or damage to the wheelchair.
Warning
»Not following the instructions in this manual may result in damage to the
wheelchair or injuries to the user.
»Avoid travelling on roads with the wheelchair. Use pavements where
possible.
»Do not take the wheelchair on wet and slippery surfaces or surfaces with
little grip, or on rough terrain or sand.
»Do not use the wheelchair if any of the parts or elements of the wheelchair
are not functioning correctly.
»This wheelchair is not suitable as a seat in a motor vehicle.
»Leaning over the back of the wheelchair can result in tipping the
wheelchair over.

PAGE 3
2. SAFETY REGULATIONS
»When leaning or reaching forward, place yourself against the backrest with
the castors facing forwards.
»Do not drive directly into curbs.
»Do not attach anything to the wheels. This can damage the wheelchair,
aect the balance of the wheelchair and cause injury to the user.
»Take notice of the maximum weight capacity (see section 4.1 Technical
specications).
»The footrests should have a minimum ground clearance of 7cm from the
ground for suitable protection from obstructions.
»Do not stand on the footrests. This will cause the wheelchair to tip over
and could cause injury to the user.
Figure 01
»Engage the brakes and make sure the wheelchair is on a stable, at
surface before transferring to or from the wheelchair.
»Unauthorised modication, or the use of parts not supplied by I-GO, will
invalidate the warranty and can lead to damage to the wheelchair or injury
to the user.

PAGE 4
It is recommended that you consult a doctor or therapist for assistance in developing
safe and eective techniques for using this wheelchair in accordance with your daily
activities and physical capabilities.
3.1 Safety tips
Getting o the wheelchair, reaching and bending while in the wheelchair will cause a
change in weight distribution and in the centre of gravity of the user and the wheelchair.
The advice below will help the user to safely carry out these movements.
Transferring
Transfers to and from a wheelchair can be dicult. We recommend consulting your
physical therapist to develop a suitable technique. If you have sucient body strength,
we recommend the following technique for safe transfers:
To get out of the wheelchair:
Make sure the wheelchair is as close as possible to the place you want to transfer
to. Face the castors forward and engage the brakes. Swing away the footrests and
place your feet at on the ground. Shift your weight to the front of the wheelchair,
using the armrests for support if you need to. You can now carry out the transfer.
(You can also use a transfer board for safe and comfortable transfers.)
To get in the wheelchair:
Reverse the instructions above to safely get in your wheelchair.
Reaching:
We recommend asking for assistance to pick something up, as reaching can cause
an extreme change in weight distribution and centre of gravity.
3. USER INSTRUCTIONS

PAGE 5
3.2 Negotiating pavements and uneven surfaces
Going up the pavement:
A wheelchair attendant can help the user in two dierent ways. We recommend using
the rst method.
1. The user and attendant face towards the pavement. The attendant must pull the
handles towards him and place his foot on the stepper, located on the rear of the
wheelchair between the wheels. This creates a leverage eect.
3. USER INSTRUCTIONS
2. The attendant stands on the pavement. Make sure the wheelchair is positioned
with the rear wheels as close to the pavement as possible. The user then leans
backwards, causing the wheelchair to tip backwards. The attendant should make
sure the front wheels are on the pavement before slowly lowering the
wheelchair.
Warning
Do not drive directly into curbs to get up on to a pavement.
Going down the pavement:
Move the wheelchair to the curb. The user leans back and the attendant tilts the
wheelchair to nd the balance point. When the wheelchair is balanced, the attendant
should move the wheelchair slowly o the curb. The attendant should only lower the
front wheels back to the ground when the wheelchair is completely o the pavement.

PAGE 6
3. USER INSTRUCTIONS
3.3 Going up and down ramps
Inspect the ramp for slippery areas or uneven surfaces before attempting to travel on it.
Warning
Do not carry weight on the rear of the wheelchair when ascending a ramp.
This changes the balance and increases the risk of tipping.
Make sure the footplates have a minimum ground clearance of 7cm to avoid catching
the end of the slope.
3.4 Going up and down stairs
Two attendants are needed for a wheelchair user to climb stairs. The attendants should
assess the total weight to be moved before carrying out this manoeuvre.
Going up the stairs
Face the wheelchair away from the bottom of the stairs, with one attendant at the front
and one attendant at the back. The attendant at the back grabs the push handles and
tips the wheelchair back until it is balanced. The attendant at the front now holds the
side frames of the wheelchair. The attendant on the front pushes the side frames up
until they are above the rst step. The attendant at the back rises to the rst step.
Repeat this technique until at the top of the stairs. Only lower the front castors to the
ground when the attendant at the front has taken the last step.
Going downstairs
Face the wheelchair forwards. The rear attendant tips the wheelchair until it is balanced.
The front attendant supports the wheelchair by holding the side frames. Guide the
wheelchair slowly down each step.
Warning
Always hold a part of the main frame of the wheelchair. Do not lift by the
push handles, armrests or footrests.
Warning
Any adjustments made to the wheelchair can increase risk of injury or
damage to the wheelchair. Adjustments made by the user are carried out at
the user’s own risk.

PAGE 7
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
This chapter explores the possibilities of the wheelchair. All settings and user
instructions will be listed.
Item Airrex LT Self-propelled Airrex LT Transit
Seat width 40 / 45 / 50 cm 40 / 45 / 50 cm
Seat height 53 cm 53 cm
Backrest height 43 cm 43 cm
Total length 106 cm (incl footrest) 90 cm (incl footrest)
Total height 96 cm 95 cm
Armrest height (Adjustable) 16 cm 16 cm
Weight (complete) 13.6 kg 12 kg
Maximum user weight 40 / 45 cm - 125 kg
50 cm - 135 kg
40 / 45 cm - 125 kg
50 cm - 135 kg
Total width 64 / 67 / 72 cm 60 / 63 / 68 cm
4.1 Technical specications
4.2 Unfolding and folding the wheelchair
Folding the wheelchair:
»Fold away the footplates and remove the footrests.
»Remove the seat pad and backrest pad.
»Stand next to the wheelchair.
»Place one hand at the front, in the middle of the seat upholstery, and one hand
at the rear, also in the middle of the seat upholstery. Pull the seat upholstery
directly upwards, as shown in image 02.
Warning
Ensure the extended backrest upholstery and seat upholstery is loosened
before folding the wheelchair.

PAGE 8
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
Unfolding the wheelchair:
»Stand next to the wheelchair.
»Grab both seat tubes and move apart.
»Push both seat tubes downwards. The chair will unfold. See image 01.
»Stand at the front of the wheelchair. Push the seat tubes in place of the side
frame. Check that the seat tubes are on the side frame and that the seat
upholstery is at.
»Replace the seat pad, backrest pad and footrests. Fold down the footplates.
Image 01 Image 02
Warning
Ensure the extended backrest upholstery is attached to the seat upholstery
before using the wheelchair.

PAGE 9
Removing the footrest from the wheelchair
»Stand at the front of the wheelchair.
»Pull the control lever upwards, as shown in image 05. The footrest should now
swing freely inwards or outwards.
»Swing the footrest 90 degrees away to the outside of the wheelchair. Pull the
complete footrest upwards from the connecting points, as shown in image 06.
Image 05 Image 06
4.3 Use of the footrest
Folding the footplate away:
»Stand at the front of the wheelchair. Hold the footplate as shown in image 03.
»Fold the footplate in the direction of the footrest, as shown in image 04.
Image 03 Image 04
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS

PAGE 10
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
Reattaching the footrest:
»Stand at the front of the wheelchair.
»Place the footrest back on the wheelchair at an angle of 90 degrees, as shown in
image 05.
»Swing the footrest away to the front until a click is heard. The click conrms that
the footrest is locked into position.
»Check that the footrest is placed correctly.
Adjusting the footrest height:
»Remove the footrest from the wheelchair.
»With the back of the footrest facing towards you, loosen the screw (image 07)
with an Allen key.
»Move the footrest tube up or down to the desired height.
»Tighten the screw with an Allen key.
»Ensure the footplate is in place and that the footrest height is equal
on both sides.
Image 07

PAGE 11
4.4 Using the brake
Activate the brake
»Push the black brake handle forwards, as shown in image 08.
»The click conrms that the brake is engaged.
Deactivate the brake:
»Pull the black brake handle backwards to deactivate the brake, as
shown in image 09.
4.5 Use of the armrests
Adjusting the height of the armrests:
»Push the knob located on the side of the wheelchair, as shown in
images 10 and 11.
»Move the armrest up or down to the desired height.
»Release the knob to lock the armrest in place.
»Check that the armrest is locked by moving it upwards and downwards.
There should be no movement.
Image 10 Image 11
Image 08 Image 09
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS

PAGE 12
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
Warning
When the wheelchair is not in use the armrests can be folded down.
We recommend placing the armrest in the highest position while using the
wheelchair.
4.6 Use of the rear wheels
Removing the rear wheel
The rear wheels of this I-GO wheelchair are removed using the ‘quick-release’ system:
»Tilt the wheelchair away from you.
»Press the button in the centre of the wheel (images 12 and 13) and pull the
rear wheel towards you.
To replace the rear wheel, follow the steps above in reverse order. Ensure the wheels
are locked in place before using the wheelchair.
Please note: The rear wheels of the Airrex LT Transit wheelchair cannot be removed.
Image 12 Image 13

PAGE 13
4.7 Tyres information
4.8 Use of the folding backrest
The backrest can be folded using the following method for ease of transportation.
»Stand behind the wheelchair.
»Squeeze the two black levers at the rear of the wheelchair at the same time,
as shown in image 14.
»The folding mechanism is now unlocked. The backrest can be folded to reduce
the height of the wheelchair.
»Ensure the backrest is straight before getting back into the wheelchair.
Model wheelchair
Airrex LT SF
Airrex LT T
Type wheelchair
Self propel
Transit
Size tyres (Front)
7” x 1¼” PU
7” x 1¼ PU
Size tyres (Rear)
24” x 1⅜” PU
12½” x 2¼” PU
Image 14 Image 15
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
Follow the steps above in reverse order to straighten the backrest.

PAGE 14
4. INSTRUCTIONS FOR USE AND MOUNTING OPTIONS
5. TRANSPORT AND TRANSIT IN A CAR
4.9 Using accessories with your wheelchair
The folding backrest:
To open the storage bag on the rear of the backrest upholstery, place your hand under
the closure and move it upwards, as shown in image 16.
To close the storage bag, press the closure against the Velcro fastener.
Image 16
To fold the wheelchair for transport in the car, see chapter 4.2: Folding and unfolding
the wheelchair.
To remove the footrests, see chapter 4.3: Use of the footrest.
To remove the rear wheels, see chapter 4.6: Use of the rear wheels.
Warning
Never sit in your wheelchair while it is being transported in a car.
Suggestion
Fold the backrest to lower the height of the wheelchair for transport. See
chapter 4.8: Use of the folding backrest.

PAGE 15
6. MAINTENANCE
Keep your wheelchair in good working condition by having it checked regularly. We
recommend you have your wheelchair checked at least once a year.
Here are some things you can do yourself to keep your wheelchair in good condition.
6.1 Tyres
Check the tyres regularly for wear and replace them as needed.
PU tyres: PU tyres are commonly used on wheelchairs as they do not need to be
inated and are puncture-proof. However, PU tyres can wear out. Check
the tread on the tyres regularly.
6.2 Brakes
Inspect both brakes for sharp rims. If sharp rims are present, the brakes should be
replaced. Ensure all parts of the brake are in the correct position and fastened securely.
»Make sure the mechanism is working smoothly. If the mechanism is sti, apply
some oil at turning points with one or two drops of WD40 oil or Teon. Remove
surplus oil and dirt.
»Make sure the brakes do not contact the wheels when the wheelchair is moving.
6.3 Cross frame
The cross frame is the basis of your wheelchair. Make sure it is in good condition at all
times.
»Check the wheelchair can be easily folded and unfolded.
»Check the wheelchair travels in a straight line while moving.
»Ensure the cross frame is not bent and shows no signs of wear.
If any of the above problems are noted, contact a qualied I-GO dealer.
6.4 Rear wheels
Adjusting the rear wheels improves the stability of the wheelchair.
»Ensure the wheels can move freely without touching any part of the
wheelchair frame.
»Ensure there is no margin on the rear wheels.

PAGE 16
6. MAINTENANCE
6.5 Front wheel and front castor fork
The front wheel and front castor fork should move and turn freely. This ensures a
smooth ride.
Check that the nut of the front fork is not too loose or too tight.
»If the nut is too loose, the wheels will rotate but the ride will be uncomfortable.
»If the nut is too tight, the wheelchair will be dicult to steer.
When the nut is correctly in place the front wheel should stop slowly.
If one of the exceptions noted above occurs, or if an adjustment is necessary, contact a
qualied I-GO dealer.
6.6 Upholstery
Check the upholstery of the wheelchair regularly. Torn or worn upholstery will fail to
support the maximum user weight and may lead to injury.
»Check the textile coating for worn spots and holes.
»Ensure the upholstery-mounting grommets are aligned and secure.
6.7 Cleaning
Cleaning your wheelchair regularly will keep it in good working condition.
»Clean the upholstery, chassis and plastic components with mild soap and water
regularly. Do not use abrasive cleaners as they can damage the varnish. Do not
use steam or high-pressure cleaners.
»Wax the varnish of the chassis regularly. Do not use solvents, caustic chemicals,
abrasive waxes or spray silicone.
»Always dry the wheelchair after cleaning or whenever it gets wet.
Suggestion: Car shampoo will also clean and protect your wheelchair.
Suggestion
Car shampoo will also clean and protect your wheelchair.

PAGE 17
7. TROUBLESHOOTING
Suggestion
We recommend only using I-GO replacement parts. Not using original I-GO
parts can void the warranty.
Looseness in chair Chair squeaks or rattles Castor utter Wheelchair feels heavy Sluggish turning Chair veers left Chair veers right
Check all nuts and bolts are tightly stuck.
Rear wheels and/or castors may be adjusted improperly. Make sure
both rear wheels and castors are mounted in identical positions.
Check for wear on the bearings.
Castor forks may be adjusted improperly.
SYMPTOM
POSSIBLE CAUSE AND CORRECT SOLUTION
Your I-GO wheelchair is built to be used immediately. Continual use necessitates regular
maintenance, particularly when factory settings have been altered.
Consult the following troubleshooting guide for a list of common problems and
suggested xes.