caresmith PULSE User manual

Electric Muscle Stimulation Massager

Table of Content
What’s in the Box?
02
Daily Usage Guide
03
About the Product 01
PULSE Modes
05
FAQs 06
Product Specifications
02
Safety Tips & Precautions 10
Warranty 13

0
About the
Product
01

What’s in the Box?
Product Specifications
Product Name
Product Weight 27g
Working Current 6.5-10mA
Power 100mW
Caresmith PULSE Electric
Muscle Stimulation Massager
02
1 Controller
3 USB Connectors
2 pairs of
Electrode Pads
1 Carry
Pouch
1 User
Manual
USER
MANUAL
0
Type A | Type C | Lightning
Micro USB

Daily Usage Guidelines
Please read the following guidelines very carefully
before using the device.
03
Switching ON the PULSE Massager
Remove the plastic films from the electrode pads.
Store the films safely in the pouch.
Attach the electrode pads to the controller leads.
Plug the controller into your phone using the
appropriate connector. The screen will turn on. The first
mode icon will be blinking and intensity will show ‘0’.
Please NOTE:
In case the screen does not turn on when
connecting to the phone, please access the phone’s
Settings function. Search for ‘OTG Storage’ in Settings
and switch on OTG Storage function. Unplug and plug
in the device again.
Using the PULSE Massager
Press the button on the side of the controller
to increase or decrease the intensity. The PULSE
Massager has 15 intensities to choose from
Toggle between the 6 different modes by pressing
the Power/Mode button
Enjoy the stimulations from your PULSE massager
for a recommended time of 20 minutes.

Switching OFF the PULSE Massager
To switch off the device, long press the Power
button. After about 5 seconds the screen will
turn off. You can now unplug the device.
Please NOTE: Do not unplug the device from your
phone without switching off the controller first.
This can harm the life of the controller.
Peel off the pads from your skin and stick them
back on the plastic films. Place the controller and
the electrode pads in your carry pouch.
04

PULSE Modes
05
Kneading
Tapping
Shiatsu
Acupressure
Scraping
Cupping
1 2
3 4
5 6
0
1
2
3
4
5
6

0
Frequently
Asked
Questions
06

FAQs
Q: I have attached the device to the phone.
But the screen doesn’t turn on.
A: Please access the phone’s Settings function.
Search for ‘OTG Storage’ in Settings and switch
on OTG Storage function. Unplug and plug the
device. The screen should now turn ON.
If the screen still does not turn ON
please contact us at
[email protected]
or Whatsapp on
[phone]
Q: I still cannot feel any pulsations even after
correctly powering on the device.
A: Please ensure that the pad are firmly adhered
on the skin.
Q: I am experiencing mild electric stimulations
when using the device. Is this normal?
A: Yes, this is completely normal. The PULSE
massager works by delivering small electrical
impulses which stimulate the body to produce
endorphins (natural pain relievers).
Q: Where should I place the electrode pads on
my body?
A: Place electrodes on the painful area. For
maximum benefit, place the electrode pads
close to each other. On occasions when the
application of electrodes at the painful site
proves uncomfortable, place the electrode
pads proximal to the painful area/injury.
07

Q: Can I use only 1 electrode pad at a time?
A: No, the device will not work unless both
the pads are attached to the body.
Q: Which mode should I use?
A: See the ‘PULSE Modes’ section of the
manual to get insights on the different modes.
Select the mode you are comfortable with.
Q: At what intensity should I operate the
PULSE massager?
A: Use an intensity at which the sensation is
‘strong but comfortable’. It is recommended
that first-time users operate the device only
at low intensities.
Q: How long should I use the PULSE
massager for?
A: Use for up to 20 minutes at a stretch.
08