Cenocco CC-9111 User manual

Maintenance
1. Wipe the surface of the equipment with a slightly damp towel and dry
it with a soft cloth.
2. When storing or travelling for a long time, please separate the battery
from the equipment and put it in the original packing box of the
equipment.
Warning
1. Don’t immerse in water, keep away from liquid and heat source at the
same time, and keep the motor cooling hole free of dust and sundries.
2. Do not disassemble screws without permission.
3. Shut down the equipment for half an hour for every hour of operation.
4. Unplug the charger from the battery after charging or before use, and
do not use it during charging.
5. Use of this equipment is prohibited without consulting a doctor for
the injured part of the body.
Disclaimer
Before using the equipment, please read the operating instructions carefully, then
use this equipment correctly according to the instructions. The company will not
assume any legal obligations for the injuries and losses caused by the improper use
of the equipment according to the instructions. Do not use in high speed and high
pressure or prohibit the use of equipment without the doctor’s approval in any of the
following circumstances:
Pregnancy, diabetes, neuropathy or retinal damage, pacemaker wear, recent surgery,
epilepsy or migraine, disc herniation, lysis or spondylitis, recent joint replacement or
intrauterine device or physical health problems, weak adults and children (need to be
accompanied by healthy adults). These contradictions do not mean that you cannot
use this equipment. We suggest you consult your doctor before using it with his
permission. We are studying the impact of the equipment on specific medical
diseases, which may lead to the above description not being comprehensive and
detailed, but all people suffering from the above symptoms must be completed with
the advice and accompanied by the doctors, experts or physiotherapists.
User Manual
Physiotherapy Apparatus
for Myofascium
CC - 9111
Flat Head:
Suitable for
all parts of
the body
Air Plug Head:
Applicable to
bones of the
whole body
Spiral
Head:
Applicable
to all joint
parts of the
body
Forked
Head:
Applicable
to pine
Large Ball
Head:
Suitable for
large muscle
group
Small Ball
Head:
Suitable for
large muscle
group
1. High frequency, high silence, high speed motor
2. Battery
3. Start and speed control button for motor
4. Battery switch +
5. Charging jack
6. 6 kinds of massage heads;
7. Electricity indicator lamp (when four green lights and one red light are
from the left, it indicates sufficient battery.
a. Then as the usage time gets longer and longer, the four
green lights will turn off from left to right, and finally only
on the red light is on, indicating that the electricity is
exhausted and needs to be charged).
8. Gear indicator light (the first blue light from the right lights up as first
gear (pulse frequency: 4 1800 rpm), the second gear when two blue
lights light up (pulse frequency: 2400 rpm), and the third when three
lights light up (pulse frequency: 3200 rpm: 5 minutes)
Instructions for use
1. When the battery switch 6 is turned to the “ON” position, both the battery power on
indicator and the power supply power indicator 9 will be on, with 4 green lights and 1 red
light representing the power consumption from strong to weak from left to right, and when
only the red light is on, it means that the power consumption needs to be charged.
2. According to the different needs of massage parts, specific heads are selected to be inserted
into the round hole in front of the fascia gun.
3. When the motor start button 4 is pressed, the motor will start to
rotate; The first green light above the motor button lights up top
represent gear “1”; Press the motor start button again, the two green
lights illuminate to gear 2; Press the motor start button three times
and the three green lights light up to represent gear 3”; Press the
motor start button four times, then the motor stops rotating; Press
the motor again to start “1” gear.
The above is the basic cycle flow.
4. Turn off the battery switch after massage.
5. In order to protect equipment, the connection will automatically stop
protection after 10 minutes of continuous operation. If it is still
needed, please turn it on again.
Battery Instructions
1. After the power is exhausted, the battery needs to be charged for 2.5-
3 hours to be fully charged, and the duration of battery life depends
on the gear adjustment.
When the battery is charged, the battery power indicator lamp 5 will
light up, which means that the charging is normal. At the same time, it
is forbidden to start the motor when charging. For your safety, the
motor key cannot be started when charging the battery.
Safety Instructions
To reduce electric shock, fire and personal injury, this product must be used according
to the following instructions.
1. Only for adults.
2. This equipment cannot directly massage the skin surface, so as not to
cause damage to the skin. The massage part or the equipment should
be covered with dry and clean clothes, and the equipment should be
gently pressed and moved during use. The massage time for the same
part should not exceed 60 seconds.
3. Under the condition of no pain, tumor and discomfort, only the soft
tissue parts of the body can be used with high speed and pressure, and
the head and any bone parts of the body cannot be used with high
speed and pressure.
4. According to the massage needs of different parts, please select the
appropriate massage head.
5. Frequent high-speed and high-pressure on the same part will cause
bruises, accompanied by pain and discomfort, which should be
stopped immediately.
6. Please keep your fingers and all your hair away from the telescopic rod
of the equipment and the cooling hole of the motor on the back to
prevent pinching.
7. Do not put any objects into the heat dissipation holes of the motor.
8. Do not overflow the equipment into the water. No water is allowed to
enter the equipment from the heat dissipation hole of the motor.
9. Do not discard or misuse this equipment.
10. Only the charger provided by the original factory can be used for
charging.
11. Please check the equipment and battery carefully before each use.
12. Don’t make any modifications to the equipment without permission.
13. Do not operate the equipment and charge the equipment in
unattended condition.