Carmanah MX Series User manual

MX Series
RRFB BACKPLATE KIT INSTALL GUIDE
LEVEL 4
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [e-mail] | carmanah.com
90711REVA
1. Remove four light bar cover screws and set aside. Slide cover off as shown.
Black Powder Coat
Black Powder Coat with
Retroreflective Tape

2
RRFB BACKPLATE KIT INSTALL GUIDE
LEVEL 4
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
4. Pull backplate forward over light bar cover. Align holes in backplate, light bar cover and captive nuts
on chassis underneath. Install all four screws loosely before tightening.
3. Center backplate with light bar chassis and slide light bar cover back on.
2. Angle backplate as shown and slide over light bar chassis as shown.
NOTE: READ ALL INCLUDED INSTALL GUIDES BEFORE SYSTEM INSTALLATION