CARNEO SlimFit+ User manual

SlimFit+

Product information
1. Initial instructions
When using this equipment for the first time, please take out the
main engine and charge it with corresponding charger. When
charging, the device will automatically switch on, and the device will
automatically update the time and date if the phone is connected.
Notice:
1. When charging, please put the motherboard into the standard
port of the charging clip.
2. Press the touch button, the watch screen will light up, and enter
the clock interface by default.

2. Warm prompt
Please download and install the APP "HitFit Pro" from the APP
Store / Google Apps Market.
Necessary hardware conditions for the mobile phone:
IOS 9.0 & above Android 5.0 & above SupportBluetooth4.0

3. Function Icons
Time and date Daily Activity Heart rate
Blood Pressure Blood Oxygen Weather
Music Control Sports Find
Stopwatch Brightness Shutdown
Note: Click on the loop to switch to different pages.

4. Watch Functions
Clock
Display
Daily Activity
It displays the total number of steps, calorie and distance of the day.
It can also be viewed in the app after connecting the watch.
Heart rate
1.Switch to this page, long press for 5 second, the icon will change
dynamically, and the light on the back of the watch will start flashing,
indicating that the measurement will begin ;
2. When measuring about 15 seconds later, the heart rate data will be
changed in real time, and after 40 seconds, the watch will stop the
measurement automatically.The watch will return to the home watch face
automatically.
Blood
Pressure
1.Switch to this page, long press for 5 second, and the watch will start to
measure;
2. After about 1 min, the watch will stop the measurement automatically.
The watch will return to the home watch face automatically.
Notice: The same with heart rate measurement,during the
measurement, please remain in a static state, and do not switch the
interface.
Blood
Oxygen
1. The measurement will take about 15 seconds.
2. Its operation is the same with heart rate and blood pressure
measurement.

Sports
Sport function with walking, running, cycling, swimming and tennis
modes.
Find phone
When switch to this page, long press the button , the phone will ring.
Notice: Please make sure the bluetooth is connected when you found
the phone.
Shutdown
Switch to this page, long press the button for 5 seconds, then the watch
will shutdown.

5. Personal data settings
After installing the APP, enter setting, click on the top profile to
enter the personal data settings page. The setting of personal
information is consistent with the user, which will help to estimate
your calorie consumption and blood pressure.
Bind watch
1. Turn on the Bluetooth on the phone
2. Open the sidebar/navigation-> click the device, chose your
device, the app will start to scan device -> click the Binding button
to connect your watch -> waiting until connect successfully.
3. If it is iPhone, when binding, there will show up a

dialog“Bluetooth require to pair”, please click“pair”.

6. Synchronous data
The watch automatically synchronizes the data after
pairing/connecting with the smartphone. Data includes steps,
calories, distance, date and time, heart rate and sports. Or you can
manually synchronize data by clicking the floating button.

7. Sleep monitor
You need to wear the watch at night, and the watch will analyze the
quality of your sleep according to your nocturnal movements and
monitor your entire sleep schedule.

8. Heart Rate/Blood pressure/Blood oxygen detection
Manual detection: enter the application, click "Synchronize" or
"Measuring" to monitor in the health interface, and the measurement
process lasts 2 minutes. Since the App can't carry out
measurements of heart rate, blood pressure, and blood oxygen in
the same time, so don't switch the interface when measuring your
heart rate. When the interface is switched, the watch will stop
measuring. Figures below show the Heart Rate interface, the
measurement of blood pressure, blood oxygen are the same as
Heart Rate.

9. Calling and message reminder
After connecting the watch to the mobile phone, enter the
notification page to open the incoming call and message reception,
and the watch will receive the message, phone call, message of
Facebook and other third parties.

10. Sedentary reminder
After connecting the watch to the phone, go to the notification page
and turn on the sedentary reminder, setting the start time and end
time of sedentary reminder. If you are not active for 1 hour, watch
will vibrate to remind.

11. Drinking reminder
After connecting the phone, enter the notification page to turn on
the drinking reminder switch to set the start time to remind
drinking.

12. Alarm Setting
After connecting to the phone, enter the sidebar/navigation->click
device->click alarm setting， add the new alarm; The watch will
vibrate when it’s the setting time. The alarm clock can be set daily
or the day of a week, and you can create up to 5 alarm clocks.

13. Remote Camera control
After connecting to the phone, enter the sidebar/navigation->click
device-> photo switch, turn on the phone camera. Switch to the
camera function on watch and long press the button to take the
photo.

14. Feedback
Under the application setting, there is a "feedback" section. You
are welcome to give us suggestions and use problems at any time,
and we will continue to improve. Below attach a screenshot of the
feedback.
15. Sharing Function
The sport detail data sharing function support Strava, Google Fit,
Apple Health and sharing to third-party app by image snapshot.
Please find this function in the sport detail data page.

16. Basic specification
⚫Waterproof level:IP68
⚫Battery:160mAh
⚫Bluetooth:4.0
⚫Charging time:2 hours
⚫Working condition:-10°C~50°C
Notice
⚫Do not hit the host seriously
⚫Do not contact benzene, thinner or other chemicals
⚫Do not close to the strong magnetic field, the electric shock
station
⚫Do not wear it during the shower (no more than 35 ° C
temperature)
⚫Do not disassemble, repair or transform yourself
⚫Do not throw in the fire, there will be explosion danger.

Safety warning
Please follow the doctor's instructions to determine your self-
diagnosis and treatment. People with blood circulation disorders,
blood diseases, please be treated under the guidance of the
doctor. The measurement results of this product are for reference
only, not for any medical use or basis.