Family D-Shape Toilet seat
7
5
8
6
Ensure the rubber pads are tted to the underside
of the hinge mounting posts, insert the elongated
washer and loosely fasten to the pan.
Align the hinge posts with the corresonding holes
in the seat assembly and push down until it clicks.
Push the button at the rear of the seat to release
and remove the seat taking care not to move the
hinge posts.
Fully tighten the bolts using the hex key provided.
IMPORTANT : Never use abrasive or harsh chemical cleaners. Wipe seat with warm soapy water to maintain surface nish.
Push metal toggle through pan hole. Realign handles and pull upwards while pushing
locking bush down into pan hole.
123
Break o handles ush with locking bush. Trim
excess with a pair of side cutters if required.
Installation Instructions
9
Slide the stainless steel covers over the hinge posts
and t the seat.
Adjust seat to desired position
on pan.
4
