Safety & Specifications
Safety
• The bed must not be used within a hospital.
• Opening or replacing electrical components may only be performed by suitably
qualiedpersonnel.
• If a fault occurs, all components must be disconnected and the mains plug pulled
out.
• The motors (for raising and lowering the bed) may only be run for 2 minutes at a
time, after which they must rest for 18 minutes. These times must be adhered to.
Otherwise the motors may be overloaded, leading to noise and increased wear.
• The electrical wiring may not be exposed to pinching, or other mechanical deforma-
tion caused by bending or pulling.
• Alterations and additions to the control and operating functions are forbidden.
• Do not use the bed in atmospheres with an explosive risk.
• Before operating the bed, make sure that no parts of the body or other objects can
become trapped and that there is no one under the bed.
• This bed is not a toy. Children shall not operate the bed without the supervision of
an adult.
• Thebedframeisttedwithasoftanti-pinchprotector,whichyoushouldnotsitor
stand on.
• When using the bed’s lifting or lowering functions, the user shall lie in the bed and
not sit or stand on the moving parts.
• There is a risk of personal injury when using liquids in the proximity of the electrical
plugs or other electrical components.
Specification
The contour of the bed is controlled by a motor assembly. The functions are operated via
a wireless hand control. The motor and hand control are pre-programmed by the supp-
lier. They have a unique code system that allows two beds to be placed alongside each
other and still be controlled individually. The bed has an emergency lowering system that
permits lowering of the moving parts of the bed if there is a power failure. The bed frame
isalsottedwithasoftedgetominimiseanyriskofpinching.Inadditiontothis,there
is also illumination, a memory function and a child-lock.
Carpe Diem Beds of Sweden | 17
ENG