CaryMart 0020709 User manual

SHENZHENGUIYUANINDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
RF Wireless Remote Control Kit For AC 220V Tubular Motor (Model 0020709)
Package Include:
1 X Receiver: S1FG-AC220
2 X Transmitter: XB-4L
1 X User manual
Features:
Application: It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and
equipments withACtubular motors, it canremote controlAC tubular motor to rotate in the positive or reversal direction.
Wireless control, easy to install.
Youcan rotate a tubular motor in the positive orreversal directionwith the transmitter (remote control)fromany placewithin a reliable distance.
The RFwireless signalcan pass throughwalls,floors and doors.
With reverse power protection andover current protection.
One/several transmitters can control one/several receivers simultaneously.
Youcan use two or more units in thesame place.
Receiver Parameters:
Model No.: S1FG-AC220
Power Supply (Operating Voltage): AC 220~240V
Output:AC220V / 2A
Working Frequency: 433MHz
Automatic stop time: 120 seconds, motorwill stop automatically after 120 seconds of rotation.
Channel: 1CH, canworkwith aACtubular motor
Static Current: ≤6mA
MaximumWorking Current: 2A
Case size: 130mmx 85mmx 40mm
Workwith learning code transmitters.
Transmitter:
Model No.: 0021113 (XB-4L)
With Sliding Cover: Slide up w hen it doesn’t work (to protect the button). Slide down the button w ill appear.
Channel/Button: 4
Button Symbol: ▲, ▼, ■, ●
Operating Voltage: 12V (1x 23A -12V battery,can be usedfor 12 months)
Operating Frequency: 433Mhz
Encoding Chip: EV1527
Encoding Type: Learning code (up to 1 million codes, reducing codecollision and unauthorizedcode scanning possibilities.)
Transmitting Distance: 50m/ 150ft(theoretically)
Operating Temperature: -20 °Cto +70 °C
Unit Size: 60mmx 32mmx 15mm
Note:
If youwant more transmitters,youcanchoose theclonertransmitters,such as model 0021112 (XB-4C). If you use thetransmitter XB-4Ctocopy your
transmitter XB-4L, then thetransmitter XB-4Calso canworkwith your receiver.
Working Range:
With a transmitter (such as XB-4L) toforma complete set, the maximumw orking distancecan reach 50Min an open ground.
The maximumw orking distance is a theoretical data, itshall be operated in an open ground, no barriers,no any interference. But in the practice,itwill
be hindered by trees,walls or otherconstructions, andwill be interfered by other wireless signals. Therefore, the actual distance may not reachthis
maximumworking distance.
If youwant tohave afurther working range, youcan install an external antenna to the receiver, andyou alsocan use a powerful transmitter, such as
CP-4L or CB-4L transmitters.
Usage (with transmitter XB-4L):
Wiring:
If youwant to control aAC 220V tubular motor, do as following:
1) Connect the plug of tubular motor to thesocket of receiver.
2) Connect the plug of tubular motor toAC power supply.
Button of receiver:
Press button ▲of receiver: Motor rotates in positive direction.
Press button ▼of receiver: Motor rotates in reversal direction.
Press button ■of receiver: Motor stops & Unlockfunction.
Button of transmitter:
Press button ▲of transmitter: Motor rotates in positivedirection.
Press button ▼of transmitter: Motor rotates in reversal direction.
Press button ■of transmitter: Motor stops & Unlock function.
Press button ●of transmitter: Lock thesystem.

SHENZHENGUIYUANINDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
Lock the system:
Press the buttons ●of transmitter to lock the system.At this time, buttons ▲or ▼can not operate the motor.
Press the button ■of receiver or transmitter to unlock thesystem.
Chang motor rotation direction:
When the motor is stopping, press andhold button ●of transmitter for8seconds,redsignal LEDflashes 3times then turns off, it means thesetting
is successful.
Automaticstop function:
Automatic stop time is 120seconds. Whenyou operate the motor torotate, motor will stop automatically after 120 seconds of rotation.
How to pair the transmitter to the receiver:
1) Press thelearning button of receiver for 1 second;redsignalLEDon the receiver is on.The receiver enters into status of LEARNING.
2) Press any buttonon transmitter. If red signal LEDflashes 3 times then turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the learning button of receiver, signal LED turns off, learning process will be
discontinued.
4) The receiver can learn several remote controls with differentcodes.
Delete alltransmitters:
We have learned remote control to the receiver. If you don’t want the receiver to work w ith the remote control, you can delete all codes of remote
controls,whicharestored in thereceiver.
Operation:
When the motor is stopping, press and hold the learning button of receiver until red signal LEDflashes 3 times, then release the button, red signal
LEDkeeps off, that means all storedcodes have been deletedsuccessfully.