CaryMart S1MU-DC06 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart.
com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S1MU-DC06 / S1MU-DC09 / S1MU-DC12 / S1MU-DC24 (1 Channel/ Three ControlModes)
2xTransmitter: C-2
1xUser manual
Feature:
Wireless control,easy toinstall
ControlLights,Motors,Fans, electricallyoperated Doors/ Locks/Windows/ Blinds/Cars orOtherApplianceswithAC110~240Vor DC 0~28V.
Functionofmemory:Thepoweriscutoff,andthenthepowerisrestored,therelaywillreturnautomaticallytothepreviousstatus.
You can turnon/offthe receiver withtransmitter (remotecontrol)fromanyplacewithinareliabledistance; thewireless RFsignalcan pass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscan controlone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz or 433MHz
Receiver:
ModelNo.: S1MU-DC06 / S1MU-DC09 / S1MU-DC12 / S1MU-DC24
Channel: 1CH
ControlModes: Toggle, Momentary, and Latched (withMemory)
Decode: Learning code
Power Supply(Operating Voltage): DC6V(S1MU-DC06), DC12V 1V (S1MU-DC12), DC9V 1V (S1MU-DC09), DC24V 1V (S1MU-DC24)
Working Voltage Range of Relay:AC110~240V orDC 0~28V
PCBSize:67mm x50mm x18mm
CaseSize: 75mm x54mm x27mm
MaximumWorkingCurrent: 10A
Transmitter:
ModelNo.: C-2
Channel: 2CH
RemoteControlDistance: 100m/ 300ft (theoretically)
Encode:Fixed code by Soldering
Unitsize: 58mm x39mm x16mm
Power Supply: 1x23A-12V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following operation):
Setting controlmode Toggle:Only connect Jumper-2.
Controlmode Toggle:Press ->On; Press again->Off.
Press button 1:Turn on the relay(connectBand C, disconnectAandB)
Press button 1again: Turn off therelay(disconnect B and C,connectA andB)
Setting controlmode Momentary:OnlyconnectJumper-1.
Controlmode Momentary: Pressand hold->On; Release->Off.
Press and holdbutton 1:Turn on the relay(connectB and C, disconnect Aand B)
Releasebutton 1:Turn offthe relay(disconnectBand C,connectAand B)
Setting controlmode Latched:Do not connectJumper-1 and Jumper-2.
Controlmode Latched:Press ->On, another relayOff;Press another button->Off.
Press button 1:Turn on the relay(connectBand C, disconnectAandB)
Press button 2:Turn off the relay(disconnectBand C,connectAandB)
Functionof memory:
When the relayis onthestatus of"ON",itwill shifttothestatus of "OFF" when the power iscut off.
Oncethe power is restored,the relaywill return automaticallytothe previous status of "ON".
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart.
com
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalremotecontrols withdifferent codes.
InteriorAnalogue Circuit Application: ForDC12Vmotororlamp
DC0~28V/ AC110~240V
Application Circuit
Powersupply
A, B=NormallyClosed;B,C=NormallyOpen.
Lamp
Relay
_
+
A B C
M
_
+
Powersupply
Motor
+
Relay
_
+
A B C
Button
Jumper-2
Jumper-1
Button
Jumper-2
Jumper-1
SignalLED
PowerLED
Antenna
RFmodule
Antenna
RFmodule
PowerLED
SignalLED
IC
Beeper
IC
Beeper