CaryMart 0020694 User manual

SHENZHENGUIYUANINDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
RF Wireless Remote Control Kit (Model 0020694 S8PX-DC12+1CV-8)
Package Include:
1 x Receiver: S8PX-DC12 / S8PX-DC24 (8 Channel / 8 Control Modes)
1 x Transmitter: CV-8
1 x User manual
Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house,farm, pasture, vehicle, ship,
offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land,water and air, such asremote control lights, sirens, locks,
motors, fans,winches, blinds, linear actuators, doors,windows, electric solenoid valves,security alarm, business signs andvarious devices.
Wireless control, easy to install.
Waterproof: The receiver haswaterproof caseandwaterproof connector, itcan be installed outdoors.
Each output has afuse
DC Power Output: It cancontrol DC equipment withvoltage 9V / 12V / 24V.
High Power: Each channel canwork at maximumcurrent 30A,such as 360W/12V, 270W/9V, 720W/24V.
Designwith low-power andhigh-speed CMOS technology.
Youcan turnon/ off thereceiverwith transmitter (remote control) fromany placewithin a reliable distance.
Wireless RF signal can pass throughwalls,floors, doors or windows.
With reverse power protection andover current protection.
Reliable control: The receiver only workswith the transmitter which usesame code.
One/several transmitters can control one/several receivers simultaneously.
Youcan use two or more units in thesame place.
Externalstatus LED:
Cable Length: 1m
Correspondwith thetransmitter buttons
Receiver Parameters:
Model No.: S8PX-DC09 / S8PX-DC12 / S8PX-DC24
Pow er Supply (Operating Voltage): DC9V±1V (S8PX-DC09), DC12V±1V (S8PX-DC12), DC24V±2V (S8PX-DC24)
Output: DC9V (S8PX-DC09), DC12V (S8PX-DC12), DC24V (S8PX-DC24)
Working Frequency: 315MHz / 433MHz
Channel: 8 CH
Control Modes: Toggle, Momentary, Latched, Toggle + Momentary, Toggle + Latched, Momentary + Latched
Static Current: ≤10mA
MaximumWorking Current: 30A / eachchannel
PCB Size: 230mmx138mmx 18mm
Case Size: 240mmx 175mmx 50mm
Workwith Fixedcode transmitters
Transmitter:
Model No.: CV-8
Channel: 8 CH
Remote Control Distance: 500m/ 1500ft (theoretically)
Encode: Fixed code by soldering
Unit size: 110mmx 50mmx 18mm
Power Supply: 1x 23A -12V battery (included,can be usedfor 12 months)
Matching Transmitters:
The receiver canworkwith different transmitters,such as model CP-8/CV-8 (500M), or CB-8 (1000M).
Working Range:
With a transmitter (such as CV-8) toforma complete set, the maximumworking distancecan reach 500Min an open ground.
The maximumworking distance is a theoretical data, itshall be operated in an open ground, no barriers,no any interference. But in the practice,itwill
be hindered by trees,walls or otherconstructions, andwillbe interfered by other wirelesssignals. Therefore, the actual distance may not reach this
maximumworking distance.
If youwant tohave afurther working range, youcan install an external antenna to the receiver, andyou alsocan use a powerful transmitter, such as
CB transmitters.
Usage (with the transmitter CV-8):
The receiver can be used tocontrol 9V / 12V / 24V equipments. If the power supply of those equipments is DC 12V, you should choose the receiver
withsame DC 12V version; and if thepower supply of those equipments is DC 24V, youshouldchoose the receiverwithsame DC24V version.
Wiring:
If you want to control a DC 12V lamp, do as following:
1) Connect the positive pole of DC pow er supply to “INPUT + (the big red line)”, and connect the negative pole of DC pow er supply to “INPUT -
(black line)”.
2) Connect the positive pole of lamp to "OUTPUT +(small line)", and connect the negative pole of lampto “INPUT- (black line)”.
Setting different controlmodes：
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
followingoperation):
1) Learning Toggle control mode: When the receiver is in thestatus of LEARNING, press button 1 of theremote control.
Control mode Toggle (Channel 1~8): Press -> On; Press again -> Off.
Press button 1: Turn onrelay 1, terminal 1 output DCpower.
Press button 1 again: Turn off relay 1, terminal 1 no output.
…
Press button 8: Turn onrelay 8, terminal 8 output DCpower.

SHENZHENGUIYUANINDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
Press button 8 again: Turn off relay 8, terminal 8 no output.
2) Learning Momentary control mode: When the receiver is in thestatus of LEARNING, press button 2 of theremote control.
Control mode Momentary (Channel 1~8): Press and hold -> On; Release -> Off.
Press and hold button 1:Turn onrelay 1, terminal 1 output DCpower.
Release button 1: Turn off relay 1, terminal 1 no output.
…
Press and hold button 8:Turn onrelay 8, terminal 8 output DCpower.
Release button 8: Turn off relay 8, terminal 8 no output.
3) Learning Latchedcontrol mode: When the receiver is in thestatus of LEARNING, press button 3 of theremote control.
Control mode Latched (Channel 1~8): Press -> On, other relays Off; Press other button-> Off.
Press button 1: Turn onrelay 1, terminal 1 output DCpower. Turn off other relays.
…
Press button 8: Turn onrelay 8, terminal 8 output DCpower. Turn off other relays.
4) Learning Toggle (Channel 1~4) + Momentary (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button 4 of the
remote control.
5) Learning Toggle (Channel 1~4) + Latched (Channel 5~8) control mode: When the receiver is in the status of LEARNING, press button 5 of the
remote control.
6) Learning Momentary (Channel 1~4) + Latched (Channel5~8)control mode: When the receiver is in thestatusof LEARNING, press button 6of the
remote control.
7) LearningLatched (Channel 1~4 interlocked;Channel 5~8 interlocked) control mode: When the receiver is in thestatus of LEARNING, press button
7 of theremote control.
8) Learning Toggle control mode (Channel 1~6) + All On / Off (Channel 7/8): When the receiver is in the status of LEARNING, press button 8 of the
remote control.
Press button 7: Turn on all 8 relays, 8 terminals output DCpower.
Press button 8: Turn off all 8 relays, 8 terminals no output.
How to pair the transmitter to the receiver:
1) Press thelearning button of receiver for 1- 2seconds; signal LEDon the receiver is on. The receiver enters intostatus of LEARNING.
2) Press any one button on transmitter. If signal LEDflashes quickly 15times and turns off, it means learning is successful.
3) When receiver is in thestatus of LEARNING, press again the button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn several remote controls with differentcodes.
Delete alltransmitters:
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote
controls,whicharestored in thereceiver.
Operation: Press and hold the button of receiver until signal LED flashes slow ly; release the button, LED keeps slow flash. That means all stored
codes havebeen deleted successfully.

SHENZHENGUIYUANINDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]