CashDro 4POS: 2POS User manual

Screen's Installation Manual

Index
1. Packaging content........................................................................................1
1.1. Packing CashDroPOS - Screens................................................................................1
1.2. Packing CashDro - CashDro......................................................................................2
1.3 Outdoor Wiring CashDro.............................................................................................2
2. Mount screens..............................................................................................3
Step 1 - Mounting brackets................................................................................................3
Step 2 - Installing second screen......................................................................................
Step 3 - Installing POS Touch............................................................................................5
Step - Connecting the wires to touch POS.....................................................................6

1. Packaging content
1.1. Packing CashDroPOS - Screens
The box contains the POS CashDroPOS Touch, the second screen and VESA mount
10” Second Screen POS 15” VESA Support
1. Packaging content | 1

1.2. Packing CashDro - CashDro
In the box you will find CashDro CashDro2 or support for second screen and into a bag
packed with all the necessary screws for mounting screens.
Second screen support Screws
1.3 Outdoor Wiring CashDro
CashDro includes the following cables:
❶ VGA Cable for second screen
❷ VGA Cable for Touch POS
❸ USB Cable for Touch POS
❹ Cable for Touch POS
❺ Cable CashDroPOS
1. Packaging content | 2

2. Mount screens
Step 1 - Mounting brackets
1. Unpacking second screen support.
Screws are included in this package:
2. Separate Part VESA
3. Place the support on the second screen
CashDro
. 2 8x20 Screw Allen screws holding the
VESA bracket placed on the second screen
support
2. Mount screens | 3

Step 2 - Installing second screen
1. VGA Pass the cable through the hole of
the support
2. Connect the cable to the second screen
3. Screw the second screen to the support
(2 Star x8 screws)
2. Mount screens |

Step 3 - Installing POS ouch
1. Release the two latches on the rear cover
2. Remove the cover
3. Screw the VESA bracket ( screws x10
Allen)
. Place the bracket on the base by sliding it
up and down
5. Tighten the mounting thread
2. Mount screens | 5

Step 4 - Connecting the wires to touch POS
1. Open the cable clamp
2. Connect the power cord
3. Connect the VGA cable
. Connect the USB cable
5. Route the three wires through the clamp
and close
6. Replace the cover and tighten the two
screws
2. Mount screens | 6

Place the POS Touchscreen with desired tilt angle and installation of screens is complete
CashDroPOS
2. Mount screens | 7

For more information about CashDroPOS
you can check out the website:
www.cashdro.com