CASHIDO OH8100-XW2 Series User manual

User Manual 10 Second Purier
OH8100-XW2 Series
10 秒淨水機櫥上型 安裝使用手冊

Nomenclature
10 Second Purifier
Filter Body
1st Filter
2nd Filter
Drinking
Water Output
Operation
Interface
Base
Tap Water Input
3/8"PVC Soft
Hose
Ozone Outtut DC Input Jack
External Power
Supply
Air Input
Rubber
Pad
PVC Soft
Hose
Silica
Tube
Adapter
Wire
Silica
Tube
Adapter
Wire
Air Vents
(2)
PVC Soft
Hose
Drinking Water 1
Filter: >>> >>>>>>
1

Nomenclature
O3 Water Diverter
Connect to
Faucet
O3 Water Switch
Vertical：ON
Horizontal：OFF
Tap Water
Output
White 3/8" PVC
Soft Hose
Other Accessories
Ozonized
Water Output
O3 Input
Φ4*7mm Silica Tube
Accessories*1 Bag
(Hose, Cable Tie, Screw
Anchor, Screw, Filter)
Female Connector*1 PCS
4*7mm Silica Tube / 1.5M*1 PCS3/8" PVC Soft Hose/1.5M*1 PCS
Adapter*1 Unit
2

Specification
Filter Specification
10 Second Purifier
Product：10 Second Purifier
Model：External：OH-8100 XW
Input Voltage：DC12V
Adapter：Input AC100-240V/50-60Hz,Output DC12V/1A
Power Consumption：6.5W(Max.)
Standby Consumption：0.3W
O3 Output：100 mg/hr
Weight：3.8 kg
Demension：348 × 220 × 420 mm
Water Requirement：Tap Water
1st Filter: Ion-Resin Exchange
Place of Production：Taiwan
Supplier：Cashido Corporation
Model：RE-01M
Material：Gel polystyrene crosslinked with DVB
Maximum Water Pressure：120 PSI (8.43Kg/cm2)
Temperature：25°C ~ 40°C
Expected Life Time：3 months
※Actual life time varies based on regional water quantity and quality.
Certification：
1.Gel polystyrene
crosslinked with
DVB, NSF/ANS-61
Certificaiton：
1.NSF42, NSF53
2nd Filter：High Precision Activated Carbon
Place of Production: U.S.A.
Supplier：Cashido Corporation
Model：CFS9812X
Material：0.5μm High Precision Active Carbon
Maximum Water Quantity：5.7 L/MIN
Maximum Water Pressure：125 PSI (8.78Kg/cm2)
Temperature：5°C ~ 38°C
Expected Life Time：1 Year/33,000L
※Actual life time varies based on regional water quantity and quality.
3

Step 1：Install Filters
2.
3.
4.
Installation Instructions
1. Insert 1st and 2nd
filters into the base.
1 2
To avoid damaging
the system, use only
Cashido-supplied
filters.
Apply moderate
downward pressure
and rotate the filters
clockwise to fasten
them in place.
Remove the filters
by rotating them
counter-clockwise.
12
FASTEN
LOOSEN
10 Seconds Purifier
Reminder:
To install or change
2nd filter, please
first press it down,
and then rotate the
filter.
4

Installation Instructions
Step 2：Choose a space for the 10 Second Purifier
1. Countertop (Illustration)
1. Choose a space on the countertop for 10 Second Purifier.
2. Ensure the hoses are long enough to reach the faucet.
2. Wall-Mount (Illustration)
Distance< 150cm
1. Choose a space on the wall above the countertop for 10 Second Purifier.
2. Look for a suitable place to drill a hole on the wall, it should be 120 cm
above the ground.
3. Use an electric drill to drill holes and use screw anchors to secure the
screws.
4. Hang 10 Second Purifier onto the screws.
1.
3. 4.
2.
Distance< 150cm
Ground
Height: 120 cm
5

Installation Instructions
Step 3:Install Ozonized Water Diverter
This product is designed for kitchen faucets, not for other applications.
1.
Connect the O3 Water Diverter to the
faucet and tighten them up.
2.
O Ring
O3 Water
Diverter
Aerator
Troubleshooting
80% of the aerators are M22
or 55/64". Cashido’s
O3 Water
Diverter
matches both of
them.
1.
Use adjustable wrench or other
tools to remove the aerator and
keep it for future use.
1. Different Caliber
2. Different Thread
3. Female Outlet
Remove Connect
If your faucet doesn’t match
Cashido’s
O3 Water Diverter ,
please contact us for various
mixer adapters.
6

Installation Instructions
Step 4: Install Water Input and Output (PVC Soft Hose)
1. Left Piping
2. Right Piping
1. Connect the tubes to the appropriate place.
2. Measure the distance and cut tube to desired length.
3. Insert the tubes 2cm into the quick connect fittings.
4. Install the check valve with the arrow facing the O3
water diverter.
5. Tighten up the O3 water diverter.
6. Insert the adapter into the machine and wall socket.
Measure the
needed tube length
Measure the needed
tube length
Power
O3 Water
Diverter
O3 Water
Diverter
Installation Confirmation
1.
After installation, turn off the O3 water diverter, and turn
on the faucet to ensure there’s no leaking.
2.
Then turn on O3 water diverter to check if the tap water
bubbles are white.
1
34
1
24
1
2
3
Tap Water
Silica Tube
Check Valve
2
3
4Adapter
Installation Instructions
Step 4: Install Water Input and Output (PVC Soft Hose)
1. Left Piping
2. Right Piping
1. Connect the tubes to the appropriate place.
2. Measure the distance and cut tube to desired length.
3. Insert the tubes 2cm into the quick connect fittings.
4. Install the check valve with the arrow facing the O3
water diverter.
5. Tighten up the O3 water diverter.
6. Insert the adapter into the machine and wall socket.
Measure the
needed tube length
Measure the needed
tube length
Power
O3 Water
Diverter
O3 Water
Diverter
Installation Confirmation
1.
After installation, turn off the O3 water diverter, and turn
on the faucet to ensure there’s no leaking.
2.
Then turn on O3 water diverter to check if the tap water
bubbles are white.
1
34
1
24
1
2
3
Tap Water
Silica Tube
Check Valve
2
3
4Adapter
7

Operation Instructions
Check Before Use
LCD Monitor
Power Drinking
Water
Set Water
Quantity Reset Filter
Turn On/Off
1. Press “Power” for 3 seconds to turn it on/off.
2. 10 Second Purifier will be in washing mode.
3. Run washing water for 10 minutes to activate the filters.
Operation Interface
1. Turn off O3 Water Diverter.
2. Turn on the faucet.
3. Ensure there are no leaks.
1
2
1. 2. 3.
OFF
OPEN
LED Indicator
ＣＡＳＨＩＤＯ
ＣO R P O R A T I O N
ＣＡＳＨＩＤＯ
ＣO R P O R A T I O N
Washing Water
10 Second Purifier
Washing Water
Standby
8

Ozonized Washing Water
2.
Turn on the O3 Water Diverter
while the faucet is on.
Turn on O3 water diverter while the faucet is on, the
machine will generate O3 with the red indicator glowing
and “O3” & “Working”shown on the monitor.
The red indicator will be glowing.
O3 will be mixed with tap water inside the O3 water
diverter to generate ozonized washing water.
After use, turn off the O3 water diverter to switch to
standby mode.
1.
O3 Water Output
Operation Directions
ON
OPEN
3.
Standby, Wake Up
10 Second Purifier will be in standby mode after 60
seconds of inactivity.
The monitor will turn off, and the red indicator will blink
every two seconds.
Press any button or use washing water to wake up the
machine.
9

Drinking Water
2.
Turn off O3 Water Diverter
while the faucet is on.
OFF
OPEN
With the purifier in “washing mode,” press the “Drinking
Water” button, and the LCD Monitor will switch to
“drinking water mode.”
3.
1.
Press “Drinking Water” button again, and it produces
drinking water, the red indicator will turn on.
The monitor will show the life time of the 1st and 2nd
filters in turn while the drinking water is on, and the sign
“>” will be turn on.
The machine will remind you when to change filters.
After use, press “Drinking Water” button again to stop
the water, and the red indicator will turn off. Repeat the
above steps for continuous use.
Switch to Drinking Water
Drinking Water Output
Operation Directions
4. Filter Change Reminder
If washing water is activated under drinking water
mode, the system will automatically switch to washing
mode.
10 Second Purifier will be in standby mode after 60
seconds of inactivity.
The monitor will turn off, and the red indicator will blink
every two seconds.
Press any button or use washing water to wake up the
machine.
5. Resume, Standby, Wake Up
1st and 2nd filters are for drinking water.
When it’s time to change a filter, the monitor will show
“CHANGE!” and blink as a reminder.
When the reminder shows, please change filters to
ensure optimal water quality.
10

Set Water Quantity
2.
Turn off the O3 Water Diverter
with the faucet on.
OFF
OPEN
Press the button to switch to Set Water Quantity mode.
The monitor will show the previous choice.
(Default value is 0.5 Liter.)
3.
1.
Drinking water amount ranges from 0.5 to 20.0 Liters.
Each press will increase it by 0.5 Liters.
Keep pressing the button to set up the water amount
you need.
While the setup is finished, press the drinking water
button to dispense water. The red indicator turns on,
and the sign “water amount” blinks.
Water stops when it reaches 0.0 Liter.
Press drinking water button to stop water output.
If washing water is activated under this mode, the
system will automatically switch to washing mode.
Press drinking water button for 2 seconds to resume
drinking water mode.
Switch to Water Amount
Set up Water Amount
Operation Instructions
11

Filter Change and Reset
2.
Turn on O3 Water Diverter
with the faucet off.
OFF
Turn off the faucet.
Press drinking water button to drain the residual water,
and then press it again to turn it off.
3.
1.
Please refer to page 4 for the instructions on how to
remove the filter and replace it with a new filter.
Switch to Drinking Water Mode
Change Filter
Operation Instructions
Drinking Water 1
CHANGE FILTER
12
FASTEN
LOOSEN
10 Seconds Purifier
4.
Press and hold the Reset Filter button to switch the
monitor to replacement mode.
Press and hold the Reset Filter button for 5 seconds
(Ensure the red indicator turns on), the sign “>” will
show up which means the setup is finished. Run
drinking water for 10 minutes to activate the filters.
Set up the Filter
ON
12

10 秒淨水機主體
產品與配件
外觀
第一道濾心
第二道濾心
飲用水出口
操作介面
底座
自來水接口
3/8"PVC軟管
臭氧出口 DC輸入插座
外接電源
空氣入口
橡膠腳墊
PVC軟管通道
矽膠管通道
電源線通道
矽膠管通道
電源線通道
透氣孔*2個
PVC軟管通道
Drinking Water 1
Filter: >>> >>>>>>
13

產品與配件
臭氧水切換器
水龍頭連接部
臭氧水開關把手
垂直：開啟(ON)
水平：關閉(OFF)
自來水接口
白色 3/8" PVC軟管
其他配件
臭氧水出口
臭氧入口
Φ4*7mm 矽膠管
電源轉接器*1個
3/8" PVC軟管/1.5M*1條
配件包*1包
(整線帶、束線帶、塑膠釘)
(螺絲、空氣濾網)
內牙轉接頭*1個
4*7mm矽膠管 / 1.5M*1條
14

產品規格
濾心
10秒淨水機
產品名稱：10秒淨水機
型號：廚上型：OH-8100 XW
電源：DC12V
變
壓 器：輸入AC100-240V/50-60Hz,輸出DC12V/1A
消耗功率：6.5瓦(Max.)
待機功率：0.3瓦
臭氧輸出：100 mg/hr
重量：3.8 kg
尺寸：348 × 220 × 420 mm
水源條件：自來水
第➀一道濾心:陽離子交換樹脂
產地：台灣
供應商：華仕德科技股份有限公司
濾心型號：RE-01M
濾心材質：Gel polystyrene crosslinked
with DVB
最大水壓：120 PSI (8.43Kg/cm2)
適用水溫：25°C ~ 40°C
濾心壽命：3個月
※實際濾心壽命將依當地水質條件而定
認證：
1.Gel polystyrene crosslinked with
DVB, NSF/ANS-61
認證：
1.NSF42, NSF53
第➁道濾心：精密活性碳
產地：美國
供應商：華仕德科技
濾心型號：CFS9812X
濾心材質：0.5μm 專利高效能活性碳
最大流量：5.7 L/MIN
最大水壓：125 PSI (8.78Kg/cm2)
適用水溫：5°C ~ 38°C
濾心壽命：1年/33,000公升
※實際濾心壽命將依當地水質條件而定
15

步驟一：濾心安裝
2.
3.
4.
產品安裝
1. 將第①道濾心，及第
②道濾心，分別插入
濾心座中 1 2
濾心座，只能插入合
適的濾心，切勿使用
不相符合的濾心強制
安裝，以免造成濾心
及濾心座損壞
順時針旋轉可將濾心
旋緊
逆時針旋轉可將濾心
旋開
12
旋緊
轉開
10 Seconds Purifier
提醒:
安裝及更換第②道濾
心時，請先下壓濾心
後再旋轉濾心。
16

產品安裝
步驟二：選擇10秒淨水機安裝方式
1. 桌上型安裝(示意圖)
1.在流理台台面上空出足以放罝10秒淨水機之空間
2.注意10秒淨水機周邊有管路可以通過的路徑，經由配管後可與水龍頭結合
2. 壁掛安裝(示意圖)
距離< 150cm
1.在流理台牆面空出足以安裝10秒淨水機之空間
2.使用螺絲孔紙卡，選定鑽孔位置，螺絲孔距離地面的建議高度為120cm
3.使用電鑽鑽孔，然後打上塑膠釘，並鎖上螺絲
4.將10秒淨水機背後之螺絲掛勾，掛在螺絲上，完成固定
1.
3. 4.
2.
距離< 150cm
地面
建議高度
120公分
17

產品安裝
步驟三:安裝臭氧水切換器
本產品適合安裝於廚房流理台水龍頭，其他用途之水龍頭(如：臉盆龍頭)不適用
1.
將臭氧水切換器與水龍頭連接，並使
用工具鎖緊。
2.
止水墊片
臭氧水
切換器
起波器
可能出現的問題
水龍頭起波器牙規，80%是為
公制M22或英制55/64"兩種規
格，
Cashido 臭氧水切換器適
用於此兩種型式(通用)。
1.
使用活動板手或其他夾具，將舊起波
器取下，並保管。
1.口徑不同
2.螺牙不同
3.出口為內牙
取下 組裝
不符合臭氧水切換器之
介面，須搭配
Cashido
之轉換接頭進行安裝
(請洽經銷商)。
18