Casio TQ-216 User manual

USER’S GUIDE CLOCK (SNZ) B
1
MA0302-A
•The configuration of your clock may differ somewhat from that shown in the
illustration.
•Be sure that the positive (+) and negative (–) poles of the batteries are facing
in the proper direction.
TO SET THE TIME
To change the time setting, rotate the Time Setting Dial.
USING THE ALARM
The alarm of this clock features a Snooze Function, which lets you catch a few
more minutes sleep in the morning.
To set the alarm
1. Rotate the Alarm setting dial in the direction indicated by the arrow marked
on clock to move the alarm hand to the alarm time setting you want.
2. Set the Alarm ON/OFF switch to ON.
•Note that this clock does not distinguish between AM and PM times. If you
set an alarm to wake up to in the morning, the alarm will sound again at the
same time in the evening if you leave the Alarm ON/OFF switch in the ON
position.
To use the alarm
The Alarm starts to sound when the current time reaches the time indicated by
the alarm hand. Pressing SNOOZE stops the Alarm sound for about five
minutes, after which it starts to sound again. This process continues for about
30 minutes after the alarm initially starts to sound.
To deactivate the snooze feature so the alarm will not sound again, change the
Alarm ON/OFF switch setting to OFF.
Hour hand
Seconds hand
Minutes Hand
Alarm Hand
If clock is equipped with light function, press this button to illuminate clock face.
Time setting dial
Alarm ON/OFF switch
Alarm setting dial