1
Quick Reference Manual 3459
MA1802-EA © 2018 CASIO COMPUTER CO., LTD.
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is designed,
carefully read and follow the instructions in this manual, especially the information under
“Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
Bluetooth®is a registered trademark or trademark of Bluetooth SIG, Inc. of the United
States.
Your watch has a Mobile Link function that allows it to communicate with a Bluetooth®
mobile phone and adjust its time settings to match those of the mobile phone.
xThis product complies with or has received approval under radio laws in various
countries and geographic areas. Use of this product in an area where it does not
conform to or where it has not been approved under applicable radio laws may be
punishable under local laws. For details, visit http://world.casio.com/ce/BLE/.
xUse of this product inside of an aircraft is restricted by the aviation laws of each
country. Be sure to obey instructions provided by flight personnel concerning use of
devices such as this product.
Visit the website below for the operation
manual (Operation Guide) of this watch.
http://world.casio.com/manual/wat/
Using the Watch
Charging
Remove the watch from your wrist and place it in a brightly lit area.
xThe watch may become hot when exposed to light for charging. Take care to avoid
burn injury.
xAvoid charging in locations where it is very hot.
Power Saving
xLeaving the watch in a dark location between the hours of 10 p.m. and 6 a.m. for about
one hour will cause [PS] to start flashing on the display.
xAfter about one week in the dark, the [PS] indicator will stop flashing, and all functions,
except for timekeeping and stopwatch functions, will become disabled.
Battery Alerts
xLow Charge
[LOW] or [CHG] flash on the display.
xDead Battery
All display indicators blank.
General Guide
1. Power Saving enabled.
2.
Auto Light enabled.
3. Time reception successful.
4.
Watch connected with a phone.*
5.
p.m. indicator (No indication for a.m.)
6.
Displayed time is summer time.
7. Alarm enabled.
8. Hourly time signal enabled.
9. Low battery charge.
10.
Snooze alarm enabled.
11.
Operation tone disabled.
*Hold down Cfor about three seconds to establish a Bluetooth connection with a
phone.
Selecting a Mode
Each press of Ccycles between modes as shown below.
xHold down Cfor about one second to enter the Timekeeping Mode.
Timekeeping
Mode
C
C
C
C
World Time
Mode
Alarm Mode
Stopwatch Mode
Timer Mode
C
12 3
4
5
6
910
7
8
11
Setting the Time
1. In the Timekeeping Mode, hold down
Auntil [HT] flashes.
xThis indicates that the Home City
setting can be changed.
Home City
2. Use Dand Bto change the Home
City.
xFor information about available Home
City settings, visit the CASIO website.
3. Press Ctwice. Moves flashing to
seconds.
4. Press Dto reset seconds to 00.
x30 to 59 seconds: Adds 1 to minutes.
5. Press C. Moves flashing to hour.
6. Use Dand Bto change the setting.
7. Press C. Moves flashing to minute.
8. Use Dand Bto change the setting.
9. Press C. Moves flashing to year.
10.
Use Dand Bto change the setting.
11.
Press C. Moves flashing to month.
12.
Use Dand Bto change the setting.
13.
Press C. Moves flashing to day.
14.
Use Dand Bto change the setting.
15.
After all the settings are the way you
want, press Ato exit the setting
screen.
Specifications
Accuracy at normal
temperature:
±
15 seconds a month
Timekeeping: Hour, minute, second, year, month, day, day of the week, a.m./p.m.
(P)/24-hour timekeeping, Full Auto Calendar (2000 to 2099),
Summer Time
Year display on setting screen only.
Signal receive
function:
Auto receive, manual receive
Auto transmitter selection (for JJY, MSF/DCF77)
Receivable call signs: JJY (40 kHz/60 kHz), BPC (68.5 kHz),
WWVB (60 kHz), MSF (60 kHz),
DCF77 (77.5 kHz)
Manual and auto standard time/summer time switching
World Time: 39 cities (39 time zones), UTC (Universal Time Coordinated);
Home City/World Time City switching
Other: Daylight Saving Time/Standard Time
Stopwatch: Measurement unit: 1/100 seconds (first hour);
1 second (after first hour)
Measurement range: 23 hours, 59 minutes, 59 seconds
Measurement functions: Elapsed time, split time, two finishes
Alarms: 5 Daily alarms (with one snooze alarm); Hourly time signal
10-second beeper
Countdown Timer: Countdown unit: 1 second
Countdown range: 24 hours
Setting unit: 1 second
Time up: 10-second beeper
Mobile Link
Functions:
Auto Time Correction
Time setting adjusted automatically at preset time.
One-touch Time Correction
Manual connection and time adjustment
Phone finder
Watch operation sounds the alert sound of the mobile phone.
World Time
Current time for approximately 300 cities selected for the watch
Home Time/World Time swapping
Original city function (location and name settings)
Auto summer time switching
Automatic switching between standard time and summer time
Timer Setting
Alarm Setting
Reminder
Reminds you of anniversaries and other important dates.
Data Communication Specifications
Bluetooth®
Frequency Band: 2400MHz-2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: 2 meters max. (depends on environment)
Illumination: LED light; Selectable illumination duration (approximately 2seconds
or 4 seconds); Auto Light Switch
Other: Power Saving; Button operation tone on/off; Month/day order;
Day of the week language; Auto time correction ON/OFF
Power Supply: Solar panel and 1 rechargeable battery
Approximate Battery
Life:
10 months
Conditions
xAuto time correction: 4 times/day
xAlarm: Once (10 seconds)/day
xIllumination: Once (2 seconds)/day
xPower Saving: 6 hours/day
Specifications are subject to change without notice.
