Casio 5436 User manual

1
Operation Guide 5436
MA1406-EA © 2014 CASIO COMPUTER CO., LTD.
xYour watch may differ somewhat from the one shown in the illustration.
Click 1
Crown
Click 2
Day
Crown Operations
Crown
Loosen
Some water-resistant models (100meters, 200meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull the
crown out. Avoid applying undue force when pulling. The watch
loses its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
If your watch has a rotary bezel...
Start
Elapsed time
Current
You can rotate the bezel to align its ▼mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼mark.
Specifications
Accuracy: ±20seconds average per month
Battery: One silver oxide battery (Type: SR920SW)
Battery Life: Approximately 3years
To adjust the time setting
When the second hand is at 12o’clock, pull
the Crown out to Click 2.
Rotate the Crown to change the time setting.
Push the Crown back in.
Note
xTake care that you set the
correct AM or PM time.
xWhen changing the time,
move the minute hand four
or fi
ve minutes past your
final setting, and then back it
up to the setting you want.
To change the day setting
Note
xThe day setting uses a
31-day month. Make
adjustments for months of
shorter lengths.
xAvoid changing the day
setting between the hours
of 9 p.m. and 1 a.m.
Otherwise, the day setting
may not change correctly at
midnight.
Pull the Crown out to Click 1.
Rotate the Crown to set the day.
Push the Crown back in.