CAT BOAT DCA013 User manual
❡ㅷ霹僈⛼
Put 4 AA batteries into the battery
compartment, As a backup power source
*Please make sure there is no grain in the barrel before
installing the battery
*The barrel can be installed upside down
Place the main body on a level surface
install the food bowl below the grain outlet
Take out the body of the smart feeder
and insert the power cord into the
power adapter socket at the bottom of
the body to ensure that it is firmly
inserted
Attention：This is an emergency power supply for power failure.
If there is no such requirement, you can skip this step
Press the USB cable flatly into the
bottom power cord slot
%QFU4NBSUTo download the app, press
Prompt to add device, set mobile
Feeding plan
Press the manual feed button three
times,One portion of grain can be
produced (about 10g-15g)
Open the cover and add pet food
Place desiccant evenly into the box
behind the top
(1) IOS users can search for "Smart Life" in the APP Store to download.
(2) Android users can search for "Google Play" APP in the browser, search for "Dpet smart" in "Google Play"
and download and register.
*The equipment needs to be connected to the power supply first, and then the distribution network
operation.
Power on the device: open the battery cover at the bottom of the machine, insert one end of the free USB cable into the USB
hole at the bottom of the machine, and the other end into its own adapter or the socket with USB interface, and then connect
the device to the power supply.
APP download
QR code
1. Put the device on the power and let it stand without long pressing the button to ensure that the indicatorlight is
flashing slowly；2. Open the APP and mobile phone Bluetooth, click the "+" sign in the upper right corner of the APP homepage to
enter the device list, and enter the device that pops up at the bottom of the APP to add;
3. Confirm that the device indicator is flashing slowly, and enter the wifipassword as prompted by the APP to ensure
that the phone is connected to a 2.4G wifinetwork;
4.After the network configuration is successful, the iris will be steady white, indicating that the device is connected to
the network, and you can use the APP to remotely control the device.
1. Put the device on the power and let it stand, press and hold the button for 5 seconds, release it after a beep, and
observe to confirm that the indicator light is blinking in a breathing mode
2. Open the APP, turn offthe Bluetooth of the mobile phone, click the "+" sign in the upper right corner of the APP
homepage to enter the device list, select the smart feeder and click to enter, then click the network configuration
mode in the upper right corner to switch to "hotspot network configuration (compatible mode)";
3. Confirm that the device indicator light flashes in a breathing mode, and enter the wifipassword as prompted by the
APP to ensure that the phone is connected to a 2.4G wifinetwork. After the input is complete, enter the hotspot
network configuration instruction page;
4. Select the network starting with SmartLife- in the network configuration list to connect. After the connection is
successful, return to the APP to enter the network configuration progress page;
5. After the network configuration is successful, the iris will be steady white, indicating that the device is connected
to the network, and you can use the APP to remotely control the device.
At present, the device supports two network configuration modes: Bluetooth network configuration and AP network
configuration. You can choose one of the two. It is recommended that users use Bluetooth configuration network first. If
Bluetooth configuration fails, you can switch to AP network configuration. Note that the network configuration The process
needs to be completed within 3 minutes, and the timeout needs to be triggered to enter the distribution network again.
1.Please confirm whether the router password you entered is correct, and pay attention to the WiFi account or whether
there are spaces and case problems before and after the password;
2. Please confirm that you are connected to a 2.4G band network. At present, the device does not support 5g band
network, that is, the default network name is WiFi network with the word - 5g
1
1
2
White breath:
Hot spot to be distributed
White flashing:
Bluetooth standby network
Off: The device has no power or battery mode, you need to remove the battery, only connect the USB cable,
and plug the USB cable again
Orange:Food shortage
The grain is lower than the height
detected by the optical eye in the cabin
Need to cut offthe power and
re-energize, then take, Out of the
turntable to clean up the grain
Enter the production test mode,
you need to cut offthe power
and re-power it to restore
Red:Block food
White light is on:
Already equipped
Flashing red
1. Please use it in an indoor environment, do not use it in direct sunlight such as a balcony.
2. Do not drop items other than pet dry food into the storage bucket, otherwise there is a risk of causing equipment abnormalities or
causing pets to eat by mistake.
3. To prevent pets from falling, it is recommended to place the feeder in a corner or against a wall.
4. Please cover or store the power cord to prevent pets from biting the cord and causing dangerous situations such as electric shock.
5. Do not disassemble or modify the device by yourself.
6. This product does not support pet food with special shapes, holes and a diameter greater than 10mm. It is only suitable for dry pet food.
Do not add wet food.
7. The shape and density of pet food grains will cause a certain deviation in the capacity of the grain bucket.
8. The number of grams of grain per serving varies due to different grain densities.
9.In the case of battery power supply, the standby time can be up to 8 days. Please install the battery in advance
before traveling.
10.Do not directly push the turntable into the equipment, it will cause damage to the components, please watch the video.
11.To disassemble the turntable, put it into the hole by hand and pull it up. After the turntable is taken out,
the inside can be wiped with a wet wipe, please do not wash with water
Smart feeder turntable
Installation introduction
Turntabledisassembly
and machine
Internal cleaning
Product Name :Niaoyu Huaxiang Smart Feeder Product number :DCA013
Overall size(mm) :315*180*330 Suggested pet types :cats, small dogs
Power supply :5V 1A
Communication distance :30m Warranty period :1 year
3. Make sure that the encryption method in the wireless settings of the router is WPA2-PSK, the authentication type
is AES, or both are set to automatic.The wireless mode cannot be 11n only;4. If the router enables wireless MAC address filtering, you can try to remove the device from the router's MAC
filtering list to ensure that the router does not prohibit the device from connecting to the Internet, or turn offMAC
address filtering;
5.Make sure that the router has enabled the DHCP service. If it is not enabled, the IP address will be occupied.Among
them, 3, 4, and 5 belong to the professional field and need to contact the router manufacturer for adjustment.
Please troubleshoot the router first, and then scan theWeChat QR code at the end of the manual to feedback the
problem. Please provide the router brand and model when giving feedback.
2
Communication method :Wi-Fi connection (2.4GHz)
Pet food :do not support aliens, holes and
pet food with a diameter greater than 10mm
Machine capacity :2.5L
1. The wifipassword is incorrectly entered (the small eyes that can open the input page)
2. Connected to a 5G network (generally a router will release 2 frequency bands, 2.4G and 5G, check whether the wifiname
has the word 5G, if it is connected to 2.4G, you need to contact the router manufacturer to turn offthe 5G signal)
3. The connection line is not plugged in well or the connection line is damaged, you can check whether the light is displayed
normally
4. Whether the status of the device indicator is correct (flashing quickly or breathing, if it is breathing, check whether the APP is
switched to the hotspot distribution mode)
5. User operation problems, check whether the operation is in accordance with the network distribution process and ensure
that the machine is close to the router
Check whether the network status of the device to be configured is consistent with the APP's network configuration mode.
The indicator corresponding to the Bluetooth configuration network flashes slowly, and the indicator corresponding to the AP
network configuration flashes in a breathing manner.The Bluetooth configuration network needs to turn on Bluetooth, and
the AP network needs to turn offBluetooth
1.Check whether the turntable is installed properly
2.Check whether the food is stuck (picture or video, judge whether the indicator light is red)
3.APP can't control the output of grain, check whether the indicator light is always on, if it is flashing, it means the
device has no network, and it is correct that no grain is output.
4. Pour out the grain, take out the turntable, trigger the grain to see if the motor does not turn, if it does not turn,
the motor is abnormal, and the machine needs to be replaced
5. No food will be delivered under the battery condition. Please note that the device cannot interact with the APP
under the battery condition, because there is no response after the APP control
1. Check the button: press the button 3 times and ask the user if he feels the button bounce, it may be that the button
is malfunctioning
2. Check whether there is power: check whether the indicator light is on, whether it is flashing, steady, or other colors,
it means that the device has power
3. Check whether the operation is correct: press the button 3 times within 5 seconds, don't be too eager, just use the
normal speed button
1. Check whether the device has a network: check whether the indicator light is normal and always on, if it is, there is
no problem when powering on, and you can perform step 2 troubleshooting
2. Check whether the motor is abnormal: put your ears close to the machine to see if you can hear the rotating sound,
or pour out the grain, take out the turntable, operate the grain, and see if the motor rotates
3. Check if the turntable is installed
1. Check whether the turntable is installed
2. If several copies are issued, it may be an old machine.The feeding plan set before will also be executed. First delete
all the feeding plans and reset them.
3. Grain delivery is non-stop. If the cause of the turntable is eliminated, it may be a machine problem. A 30-second
video must be provided and returned to the factory after confirmation
It is recommended to take out the turntable and wipe it with
a wet wipe
Will do if the feeding plan is previously set
There may be a problem with the button rebound of the
device, and it must be returned to the factory after
confirmation
Delete all plans first and reset
User operation problems, tell users not to rush when
operating,Press 3 times within 5 seconds
It varies according to the density of the grain, about 2.5 kg.
About one cat for half a month
Need to check whether it is during the energy saving period
of the machine, from 11 pm to 7am
¡
Yes. 5 times’press on the main control button to shut the light.
When successfully connected, find and click the icon in the
on the device control page, click Sharing Device and input the
phone number to send device sharing invitation
¢
This is the infrared light emitted by the optical eye of the
device is detected by the camera.Normal human eyes
can’t see
Yes, it should be noted that you need to long press the 10 second
button to unbind or operate to unbind at the app end (click the
icon in the upper right corner of the control page to enter the
secondary page, pull to the bottom and click unbind), and then
carry out the distribution network operation
Yes, as long as there is a 2.4g network, there are currently 4 APP
versions: China, Korea, Japan, and Taiwan. The adapter is also
compatible with foreign voltages, and foreign voltages between
100-240V are applicable
7~8 days, can not interact with APP under battery condition
¢
No need to re-operate the distribution network, the module
will automatically work
Check whether there’s food in the machine that covers the optical
eye, if it does, the machine would define current mode as food
shortage condition. That’s when the light is orange.
When the food inside turns full and leaves the optical eye away,
the light will switch to white as the machine condition is defined
as common-operated.
£
Wechat：meifu0514
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
etween the radiator & your body.
¤¥¤
¢
