Cat Crib CAT HAMMOCK Instruction manual

General Instructions and Troubleshooting for the Cat Crib
1. Place Cat Crib underneath the center of the chair.
2. Note the different sides of the strap. One side has a grippy rubber material
and the other side only Velcro.

General Instructions and Troubleshooting for the Cat Crib
3. Slide one buckle onto each strap, leaving the open side of the buckle facing
towards the rubber material. Wrap each strap around the chair leg and
back through the buckle. ENSURE THE RUBBER SIDE OF THE STRAP IS
FACING THE CHAIR LEG. Leave all four straps loose at this point.
4. Holding the buckle close to the face of the chair leg, pull each strap tightly
and wrap Velcro around to secure.

General Instructions and Troubleshooting for the Cat Crib
5. Go around to each strap and re-tighten until each strap is pulling tightly or
the strap is pulled all the way to the seating area.
The picture to the left shows the Cat Crib installed on a larger chair with the
strap fully tightened and stretching.
The picture on the right shows the Cat Crib installed on a smaller chair with
the seating area pulled all the way to the buckle.
Tight strap
Seating area
@ buckle

General Instructions and Troubleshooting for the Cat Crib
TROUBLESHOOTING
If you’re experiencing trouble installing your Cat Crib, please look at the following
issues. The majority of problems come from when the straps are not secured
correctly.
1. The buckle is left on the corner of the chair leg instead of the face.
Buckle at corner -WRONG
Buckle at face - CORRECT

General Instructions and Troubleshooting for the Cat Crib
2. The strap is loose around the chair leg on a small chair.
Strap loose -WRONG
Strap pulled tightly - CORRECT

General Instructions and Troubleshooting for the Cat Crib
3. The strap is loose around the chair leg on a large chair.
Strap hanging -WRONG
Strap tight - CORRECT