CC&T 2662 User manual

PARTS LIST HARDW ARE LIST :
1 RUSH SEAT 1 PC. A JCBC SCREW-M6x70mm 8 PCS.
2SIDE FRAME 2 PCS. BBARREL NUT 8 PCS.
3 TOP RAIL 2 pCS. CWOOD BUTTON 8 PCS.
4 BOTTOM RAIL 2 P CS. 0PAN HEAD WOOD SCREW - 38mm 8 PCS.
EALLEN KEY-M4 1 PC.
ICIC] CAROLINA CHAIR & TABLE
COMPANY
Assembly Instructions
MODEL NO. : 2662
24" RUSH SEAT STOOL
·
Thank you for purchasing a Carolina Chair & Table Company product. This product has been designed for easy assembly and is
constructed for durability. Please take the time to read and follow the assembly instructions carefu.lly.lf a part or hardware is
missing or you have any difficulties in assembling this product, Plea~ c~ntact us Toll Free at 1-800-228-3876.
DE
TOOLS REQUIRED (NOT INCLUDED) :
Ic8
Philip Head Screw Driver
IMPORTANT NOTE:
· Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. Check to
be sure that you have all parts and hardware. Remove all wrapping materials, including staples & packing straps before you start
to assemble. Do not tighten all screws/bolts until all completely assembled.
·Keep all hardware parts out of reach of children.
·DO NOT TIGHTEN BOLTS/SCREWS UNTIL ALL COMPLETELY ASSEMBLED.
Page 1 of 2.

Assembly Instructions
MODEL NO. : 2662
24" RUSH SEAT STOOL
1
ax
\~
2
E
2, /
V
8x
(\Y~ ~\
8x
CARE AND MAINTENANCE
.The
touch of a soft cloth is all the maintenance your wood pieces will ever need. Never use harsh chemicals or abrasive cleaners,
as they could marl< or destroy finish.
·Bolts, screws, and nuts may loosen during everyday use. They should be periodically inspected and re-tlghtened to prevent
damage or injury. Always visually check that all hardware on the list is attached and kept nghtened. ~
MADE IN MALAYSIA Page 2of 2.