CC&T 4727 User manual

ICICJ CAROLINA CHAIR TABLE
IIIII COMPANY
Assembly Instructions
MODEL NO. : 4727
MISSION ROCKER
•Thank you for purchasing a Caronna Chair Table Company product.'This product has been designed for easyasserrrbly and is
constructed for durability. Please take the time to read and follow the assembly instructions carefully. If a part or hardware is
missingor you have ny difficulties in assembling this product, Pleose contact usTollFree at 1-8QO..228--3876.
PARTS LIST : HARDWARE LIST:
A LONG JCBC SCREW-M6x60mm
B SHORT JCBC SCREW·M6x40mril
C SPRING WASHER-M6
D FLAT WASHER-M6
E PAN HEAD WOOD SCREW-M4x32mm
F WOOD DOWEL·DIA.10x30mm
G WOOD BUTTON.14.5mm DIA.
H LONG ALLEN KEY
1 CHAIR BACK PANEL 1 rc,
2 FRONT RAIL 1 PC.
3 FRONT STRETCHER 1 PC.
4 CUSHION SEAT 1 PC.
S ARM RESTFRAMEASSEMBLY (R L) 2PCS.
6 WOOD SKID (R L) •• ~ 2 . .... 2 pes.
~
14 pes.
2 pcs.
16 pes.
2 pes.
2 pes.
6 PCS.
10PCS.
1 PC.
H
@C@D gG
TOOLSREQUIRED(NOT INCLUDED'~
-=::€:::::=:::::::JC::=
DRubber MaUet
Phillips Head Screw Driver
IMPORTANT NOTE:
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the ports from being scratched. Check to
be sure that you have all parts and hardware. Remove all wrapping materials, including staples packing straps before you start
to assemble. Do not tighten all screws/bolts until all completely assembled •
• Keep all hardware parts out of reach of chndren.
•DO NOT TIGHTEN BOLTS/SCREWS UNTIL ALL COMPLETELY ASSEMBLED.
. Page 1of 5.

bly Instructions
Assem 4727
M~~~~~~~~~CK~E~R~ _
[V
2
Page2of5

Assembly Instructions
MODEL NO : 4727
MISSION ROCKER
H
Page30f 5.

Assembly Instructions
MODEL NO. : 4121
MISSION ROCKER
TAPGENTLV
THEFABRIC COVER ON THE,BACK OF THE SEATIS HELD IN PLACE WITH VELCRO. vou
WILL NEED TO PULL THE FABRIC COVER DOWN IN ORDER TO EXPOSE THE SCREW HOLES.
Page 4 of 5.

Assembly Instructions
MODEL NO : 4727
MISSION ROCKER
2x
.~ •.•..
CARE AND MAINTENANCE
• Thetouch of a softcloth isall the maintenance your wood pieces will ever need. Never useharshchemica~ or abrasive cleaners,
as they could mark or destroy finish.
• Bolts, screws,. and nuts may loosen during everyday use. Theyshould be periodicaly inspected and re-tightened. Always visually
checK that all hardware on the listisattached and ~ept tightened.
MADEINMALAYSIA Page 5 of 5.