cecotec Conga 3090 Series User manual

myRobotcenter
The expert for robots in your home
With one click to the online shop
myRobotcenter.eu myRobotcenter.co.uk

Manual de instrucciones
Instruction manual
Manuel d’instructions
Bedienungsanleitung
Manuale di istruzioni
Manual de instruções
Conga Serie 3090_Manual_GE.indd 1 1/8/18 10:44

Conga Serie 3090_Manual_GE.indd 2 1/8/18 10:44

1. Piezas y componentes
2. Instrucciones de seguridad
3. Montaje
4. Funcionamiento
5. Limpieza y mantenimiento
6. Cambio y carga de la batería
7. Resolución de problemas
8. Especificaciones técnicas
9. Reciclaje de electrodomésticos
10. Garantía y SAT
04
06
07
08
14
16
17
17
18
18
49
51
52
53
59
61
62
62
63
63
64
66
67
68
74
76
77
77
78
78
79
81
82
83
89
92
92
92
93
93
19
21
22
23
29
31
32
32
33
33
34
36
37
38
44
46
47
47
48
48
INHALT
1. Teile und Komponenten
2. Sicherheitshinweise
3. Bevor dem ersten Gebrauch
4. Betrieb
5. Reinigung und Wartung
6. Aufladen und Ersetzen des Akkus
7. Problemlösung
8. Technische Spezifikationen
9. Entsorgung von alten Elektrogeräten
10. Garantie und Kundendienst
INDEX
1. Parts and components
2. Safety instructions
3. Before use
4. Operation
5. Cleaning and maintenance
6. Battery replacement and charging
7. Troubleshooting
8. Technical specifications
9. Disposal of old electrical appliances
10. Technical support service and warranty
INDICE
1. Pezzi e componenti
2. Istruzioni di sicurezza
3. Prima dell’uso
4. Funzionamento
5. Pulizia e manutenzione
6. Cambio e ricarica della batteria
7. Soluzioni dei problemi
8. Specifiche tecniche
9. Riciclaggio degli elettrodomestici
10. Garanzia e SAT
SOMMAIRE
1. Pièces et composants
2. Instructions de sécurité
3. Avant utilisation
4. Fonctionnement
5. Nettoyage et entretien
6. Comment charger et changer la batterie
7. Résolution des problèmes
8. Spécifications techniques
9. Recyclage des électroménagers
10. Garantie et SAV
ÍNDICE
ÍNDICE
1. Peças e componentes
2. Instruções de segurança
3. Montagem
4. Funcionamento
5. Limpeza e mantenutenção
6. Carga e gtroca da bateria
7. Resolução de problemas
8. Especificações técnicas
9. Reciclagem de electrodomèsticos
10. Garantia e SAT
Conga Serie 3090_Manual_GE.indd 3 1/8/18 10:44

ENGLISH
19
1. PARTS AND COMPONENTS
Main body
1. Cover
2. Back home : Home
3. Power button/Automatic cleaninga
4. Spot cleaning: Laser
Light indicator
5. Operating: steady blue light
6. Recharging/low power: yellow light blinks slowly
7. Charging: yellow light oscillates
8. Network configuration: blue light flashes slowly
9. Start-up/firmware update: blue light oscillates
10. Error: red light flashes quickly
1
2
3
4
Conga Serie 3090_Manual_GE.indd 19 1/8/18 10:44

ENGLISH
20
Main body and sensors
1. Charging sensor
2. Bumper
3. Laser sensor
4. Side brush
5. Driving wheel
6. Free-fall sensor
7. Omnidirectional wheel
8. Main brush
9. Main brush cover
Water tank
1. Dripping holes
2. Water tank
3. Velcro
4. Water tank release
button
5. Water-filling hole
6. Mop
1
2
7
8
9
6
4
5
3
1
6
5
3
2
4
Conga Serie 3090_Manual_GE.indd 20 1/8/18 10:45

ENGLISH
21
Charginng base
1. Signal receptor
2. Charging terminals
3. Charge indicator
4. Power socket
2. SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance. Keep this instruction manual
for future reference or new users.
• This product must be used in accordance with the directions in this instruction manual.
Cecotec cannot be held liable or responsible for any damages or injuries caused by
improper use.
• Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance and that the wall outlet is grounded.
• This product can only be disassembled by qualified personnel.
• Do not touch wires, power supplies or power adapters with wet hands.
• Keep the robot away from clothing, curtains and any other similar materials.
• Do not sit or place heavy or sharp objects on top of the appliance.
• Do not operate the appliance close to heat sources, flammable substances, wet surfaces
where it can fall or be pushed into water or allow it to come into contact with water or
other liquids. Do not operate outdoors.
• Do not use the charging base if it has a damaged cord or plug or if it is not operating
properly. In case of fault or malfunction, contact the official Technical Support Service of
Cecotec.
• Do not operate the device on tables, chairs or other high surfaces where it could fall.
• Do not use the laser protection as a handle to move the robot.
• Do not operate the product in places where the temperature is below 0 ºC or above 40 ºC.
• The appliance can only be operated with the provided battery and power adapter. The
use of other components or accessories could cause risk of fire, electric shock or product
damage.
• Do not use the device to vacuum flammable or burning objects such as cigarettes,
matches or ash.
• Before operating the robot, please remove any objects on the ground such as clothing,
papers, power cords or other items that may obstruct the device.
• The appliance is not intended to be used by children under the age of 8. It can be used by
1
2
3
4
Conga Serie 3090_Manual_GE.indd 21 1/8/18 10:45

ENGLISH
22
children over the age of 8, as long as they are given continuous supervision.
• This appliance can be used by children aged 8 and above, and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, as long as
they have been given supervision or instruction concerning the use of the appliance in a
safe way and
3. BEFORE USE
1. Place the charging base against the wall,
leaving the safety distance indicated in the
below picture, and connect it to a power supply.
Warning: do not expose the charging base to direct
sun light.
2. 2. Press the button for 3 seconds, when
the light indicator remains steady place the
robot on the charging base.
• Take the robot to the charging base if the
battery is low. The robot might not turn on if
the battery is very low.
• The robot cannot beturned offduring charging.
· Steady blue light: ON/Operating
· Yellow light oscillates: charging
· Red light blinks: error
Wind the remaining cable onto the
charging base’s bottom part.
Conga Serie 3090_Manual_GE.indd 22 1/8/18 10:45

ENGLISH
23
3. Install the water tank
Note:it is not suggested to use the scrubbing function for the first-time use.
1. Attach the mopping cloth to the bottom part of the
water tank and fix it properly.
2. Open the water tank’s rubber lid, fill it up with
water and close it again.
3. Add some cleaning agent if
considered necessary.
Warning:the excess of cleaning agents might cause filter damage.
4. Align the water tank with the robot’s
bottom part and push it into its
correct position until you hear a click
indicating it is properly fixed.
5. To remove it, press the water tank
release button and pullfrom the water
tank.
Note: remove the water tank when the
robot is charging or not in use..
Warning: in orderto achieve perfect scrubbing, it is suggested to moisten the mop before
using it.
4. OPERATION
• Once the robot’s light indicator changes from blinkingyellowto steadyblue, the battery is
fully charged and the robot is ready to operate.
• Once the App is installed, the robot can be operated directly from the remote control.
• The robot cannot operate with low battery.
• Remove all cables and obstacles from the floor before operating the robot in order to
avoid accidents and damage.
Conga Serie 3090_Manual_GE.indd 23 1/8/18 10:45

ENGLISH
24
4.1. ROBOT BUTTONS
1. AUTO mode
Press on the robot for it to start cleaning automatically in zig-zag, recognizing which
areas it has cleaned and which ones it has not.
The robot will plan the cleaning route automatically as it is cleaning. If during this mode
the robot is directed manually, it will re-plan the route and could repeat already-cleaned
areas. In order to ensure efficient cleaning, do not operate it manually during auto mode
cleaning.
If the battery is lowduring the cleaning cycle, the robot will smartly returnto the charging
base automatically and, once it is fully charged, it will resume the cleaning from the same
point, offering a high-efficiency cleaning.
During the cleaning, the robot will make a brief stop to evaluate the area and plan the
cleaning route (this stop will vary depending on the house conditions).
2. SPOT cleaning
While the robot is paused or in standby mode, press the LASER
button to activate Spot-cleaning mode. The robot will clean
within a 2*2 space, and will return to the starting position once it
has finished. This mode is commonly used to clean floors
3. Back-home mode
Press the HOME button on the robot in order to send the robot to the charging base. This
mode can activated during any other cleaning cycle and the robot will automatically
return to the charging base and stop the cleaning process.
The robot will take the shortest route back to the charging base thanks to its map
memorizing and the smart back-home function.
When a cleaning cycle has been completed or the robot’s battery is low, the robot will
also return to the charging base to avoid running out of battery.
Warning: remove the water tank during charge.
3
1
2
Conga Serie 3090_Manual_GE.indd 24 1/8/18 10:45