celesco MTA-3 User manual

use 4-40 or M3 screws and servo-clips to mount sensor.
Ø 1.65 [41,9] BC. 120º Apart (3-inch)
Ø 2.52 [63,9] BC. 120º Apart (5-inch)
Outline Drawing
Servo Clip Mounting Option: Mounting Bracket Option:
0.300 [7,62]
0.156 [3,96]
Mounting Hole Detail
INCHES[MM]
A1.8 [46] 3.0 [75]
B1.3 [33] 2.3 [59]
C1.0 [25] 1.2 [31]
D1.7 [42] 2.4 [62]
E1.13 [28,6 ] 1.87 [47,6]
3-inch Range 5-inch Range
1.04 [26.4]
A
0.60 [15,2]
0.58 [14,7]
0.47
[11,9]
0.47
[11,9]
E
B
D
C
celesco.com
v1.0
version: 1.0 / item no: MTA-MANUAL
MTA Installation Guide
includes: MTA-3 and MTA-5
- voltage divider / 5k ohms
MTA
General
Stroke Range Options: 3 and 5 inches
Output Signal: voltage divider (potentiometer)
Accuracy: ± .4% fs.
Repeatability: ± .02% fs.
Operating Temp: -67° to -212°F (-55° to 100°C)
Sensor: conductive plastic potentiometer
Potentiometer Cycle Life: 50 million cycles
Measuring Cable: .024-in. dia. nylon-coated stainless
Measuring Cable Tension 2 oz. (3-inch), 4 oz. (5-inch)
Enclosure Material anodized aluminum
Enclosure Design NEMA 12, IP55
Weight: .1 lbs (3-inch), .26 lbs (5-inch)
Electrical
Input Resistance: 5K ohms, ±10%
Power Rating: 1 W at 104°F (40°C)
Recommended Max. Input Voltage 30VDC
Temp. Coecient of Voltage Dividing Ratio <2ppm/°C
Temp. Coecient of Resistance
-50° to +75°C ±200 ppm/°C
+75° to +100°C ±300 ppm/°C
Electrical Stroke: 94% ±4% of input voltage
Complete Specs: celesco.com/_datasheets/mta.pdf
Ø.2 in. [5 mm]
shielded, 24 AWG multiconductor
w/strain relief
40 in. [1 meter] length
28 AWG 4 in. [100 mm] length
5K Ω
+in
common+out
(attach sensor to bracket as shown)
common
+out
+in
regulated DC supply
(30 volts max.)
–
+
A0.50 [12,7] 0.87 [22,1]
B1.0 [25,4] 1.2 [30,5]
C1.375 [34,95] 2.240 [56,90]
0.190 [4,83] I.D.
0.380 [9,65] O.D.
0.080 [2,03]
0.500 [12,7]
0.110 [2,79]
0.145 [3.68]
0.050 [1.27]
INCHES [MM]
A
BC
3-inch Range 5-inch Range
4-inch, 28AWG wire leads or
optional 40-inch, multiconductor cable
SIGNAL COLOR
+in = brown
+out = red
common = orange
SIGNAL COLOR
+in = red
+out = green
common = black
4-INCH WIRE OPTION:
40-INCH SHIELDED CABLE OPTON:

use 4-40 or M3 screws and servo-clips to mount sensor.
Ø 1.65 [41,9] BC. 120º Apart (3-inch)
Ø 2.52 [63,9] BC. 120º Apart (5-inch)
Outline Drawing
Servo Clip Mounting Option: Mounting Bracket Option:
0.300 [7,62]
0.156 [3,96]
Mounting Hole Detail
INCHES[MM]
A1.8 [46] 3.0 [75]
B1.3 [33] 2.3 [59]
C1.0 [25] 1.2 [31]
D1.7 [42] 2.4 [62]
E1.13 [28,6 ] 1.87 [47,6]
3-inch Range 5-inch Range
1.04 [26.4]
A
0.60 [15,2]
0.58 [14,7]
0.47
[11,9]
0.47
[11,9]
E
B
D
C
celesco.com
v1.0
version: 1.0 / item no: MTA-MANUAL
MTA Installation Guide
includes: MTA-3 and MTA-5
- voltage divider / 5k ohms
MTA
General
Stroke Range Options: 3 and 5 inches
Output Signal: voltage divider (potentiometer)
Accuracy: ± .4% fs.
Repeatability: ± .02% fs.
Operating Temp: -67° to -212°F (-55° to 100°C)
Sensor: conductive plastic potentiometer
Potentiometer Cycle Life: 50 million cycles
Measuring Cable: .024-in. dia. nylon-coated stainless
Measuring Cable Tension 2 oz. (3-inch), 4 oz. (5-inch)
Enclosure Material anodized aluminum
Enclosure Design NEMA 12, IP55
Weight: .1 lbs (3-inch), .26 lbs (5-inch)
Electrical
Input Resistance: 5K ohms, ±10%
Power Rating: 1 W at 104°F (40°C)
Recommended Max. Input Voltage 30VDC
Temp. Coecient of Voltage Dividing Ratio <2ppm/°C
Temp. Coecient of Resistance
-50° to +75°C ±200 ppm/°C
+75° to +100°C ±300 ppm/°C
Electrical Stroke: 94% ±4% of input voltage
Complete Specs: celesco.com/_datasheets/mta.pdf
Ø.2 in. [5 mm]
shielded, 24 AWG multiconductor
w/strain relief
40 in. [1 meter] length
28 AWG 4 in. [100 mm] length
5K Ω
+in
common+out
(attach sensor to bracket as shown)
common
+out
+in
regulated DC supply
(30 volts max.)
–
+
A0.50 [12,7] 0.87 [22,1]
B1.0 [25,4] 1.2 [30,5]
C1.375 [34,95] 2.240 [56,90]
0.190 [4,83] I.D.
0.380 [9,65] O.D.
0.080 [2,03]
0.500 [12,7]
0.110 [2,79]
0.145 [3.68]
0.050 [1.27]
INCHES [MM]
A
BC
3-inch Range 5-inch Range
4-inch, 28AWG wire leads or
optional 40-inch, multiconductor cable
SIGNAL COLOR
+in = brown
+out = red
common = orange
SIGNAL COLOR
+in = red
+out = green
common = black
4-INCH WIRE OPTION:
40-INCH SHIELDED CABLE OPTON: