Celestron 72374 User manual

OUTLAND X MONOCULAR
WITH SMARTPHONE ADAPTER AND BLUETOOTH REMOTE
INSTRUCTION MANUAL
MODEL #72374

1
FOCUSING
EYECUP ADJUSTMENT
TRIPOD ADAPTABILITY
CARE AND STORAGE
To focus your monocular, simply view a subject
through the monocular’s eyepiece and turn the
focus wheel until the image is clear and sharp.
HINT: Eyeglasses worn for nearsightedness should be
worn when using monoculars, as you may not be able
to reach a sharp focus at infinity without them.
Twist the eyecup up if you do not wear eyeglasses and
fold it down if you do wear eyeglasses to obtain the
maximum field of view.
Now you are ready to use your monocular —enjoy the
view!
Your Popular Science™by Celestron monocular
features a built-in tripod adapter fitting, which is a
threaded port on the side opposite the focus dial. To
attach a tripod,simply thread the bolt from the tripod
mounting plate into the threaded port. Mounting your
monocular this way allows for added stability and
comfort.
Your Celestron monocular will provide you years
of dependable service if it is cared for and stored
properly.
1. Protect the monocular from impact and do not force
any of the moving parts beyond their limits.
2. Store your monocular in a cool, dry place whenever
possible.
3. When storing for an extended period of time, place
the monocular in a plastic bag or airtight container
with a desiccant.
4. Do not leave the monocular in a car on a hot/sunny
day or near anything that generates heat as this may
cause damage.
5. Clean any dust, dirt or water that may get on the
monocular or inside moving parts as soon as
possible to prevent any unforeseen damage.
OUTLAND X MONOCULAR
WITH SMARTPHONE ADAPTER
AND BLUETOOTH REMOTE
PARTS OF A MONOCULAR
Thank you for choosing this Popular Science™by
Celestron®monocular. We hope it will bring you many
years of enjoyment. Please read these instructions on
its use and care to ensure that you receive the greatest
value and longest life of your new monocular.
WARNING: Never look at the Sun while using your monocular.
Looking at the Sun can cause permanent eye damage.
TRIPOD
FOCUSING
RING
EYEPIECE
BODY
OBJECTIVE
LENS

2
CLEANING
SERVICE AND REPAIR
WARRANTY
CAUTION!
Proper cleaning of the lenses is essential to maintaining
the optical integrity of your monocular. Dirty lenses
diminish the amount of light transmitted through the
monocular and your overall viewing experience.
1. Remove any dust on the lens with a soft lens brush
or a can of pressurized air.
2. Remove any fingerprints, stains or smudges from
the lens surface with a soft, clean lens cloth or lens
tissue by rubbing in a circular motion. Start in the
middle of the lens and work your way to the edges.
Breathe lightly on the lens to provide moisture if
needed.
3. For a more thorough cleaning, we recommend
the use of a lens/optics cleaning kit available at
most photo or optical shops. Follow the directions
supplied with the cleaning kit for best results.
Never attempt to clean your monocular
internally or try to take it apart!
If warranty problems arise or repairs are necessary,
contact the Celestron customer service department if
you live in the U.S.A. or Canada. If you live elsewhere,
please contact the Celestron dealer you purchased
the monocular from or the Celestron distributor in your
country (listings are available at celestron.com).
Your monocular is covered under the Celestron
Limited Lifetime Warranty. Celestron warrants this
monocular to be free from defects in materials and
workmanship for the monocular’s usable lifetime to
the original owner. Celestron will repair or replace the
monocular which, upon inspection by Celestron, is
found to be defective in materials or workmanship and
within the definitions of the limits described below.
This warranty does not cover products that have been
subject to abuse, misuse, physically damaged, altered,
or had unauthorized repairs or modifications. This
warranty does not cover defects due to normal wear
and tear and other conditions. This warranty is valid to
USA and Canadian customers who have purchased
their monocular from an authorized Celestron dealer
in the USA or Canada. For products purchased
outside of the USA or Canada, please contact your
local Celestron Distributor or authorized Dealer for
applicable warranty information. Additional warranty
information and eligibility details can be found on the
Celestron website.
This product is designed and intended for use by those 14 years of age
and older.
Product design and specifications are subject to change without prior
notification.
For complete specifications and product
information, visit celestron.com
Viewing the Sun may cause permanent eye damage. Do not view the Sun with your monocular or even with the
naked eye.

Loosen the eyecup cuff tension knob Fit the eyecup cuff over the eyecup of the
binocular and tighten the eyecup cuff tension
knob until the adapter is held firmly in place
Loosen the smartphone clamp position knob (if
not already loose) and position the eyecup of
the adapter so that its aperture aligns with the
camera lens of the smartphone
Tighten the smartphone clamp position knob
and check that the position of the adapter’s
eyecup aperture stays centered over the
smartphone camera lens
Activate the smartphone camera and check
that the image seen through the binocular is
centered in the smartphone’s viewing screen. If
it is not, use the adapter’s clamp position knob
to make adjustments until it is.
NOTE: the image will be vignetted (shows as a circle
inside a black border area - this is normal. Simply use
the smartphone camera’s zoom to expand the image
until the vignetting disappears.
Pull outward on the spring clamp arms and place
the smartphone into the space between the
clamp arms so that it is securely grasped by the
tension of the arms.
With the eyecup of the binocular twisted down to its lowest position:
13
6
2
4 5
USING THE
SMARTPHONE ADAPTER
CAUTION: Do not carry the binocular with the smartphone adapter in place as it may be
accidentally bumped and fall off, potentially damaging the smartphone as a result.
3

USING THE
BLUETOOTH
REMOTE
Press and hold the button on the remote for 5
seconds. A blue light will turn on and, after a
few seconds, start to blink. The remote is now
in pairing mode.
Using the Bluetooth settings on your phone,
pair the device called “GBshutter”.
Open your camera app. Press the button on the
remote to trigger the shutter on your phone.
If your camera is in video mode, you can press
the button once to start recording and again to
stop the recording.
4 5
To insert or replace the battery, place your
thumb in the center of the back cover, pressing
inward and sliding downward remove the
battery door. The CR2032 battery should be
inserted with the positive (+) side facing
upward. Replace the cover.
123
4

SAFETY INSTRUCTIONS
• Risk of explosion if battery is replaced by an incorrect type.
• The included battery is not rechargeable.
• Please use the battery in its original purpose to avoid causing the battery to short circuit. When the conductive
material is connected directly to the battery positive and negative will cause a short circuit.
• Do not use a damaged battery.
• Keeping the battery in an extremely cold or very hot location can result in shortened battery life.
• When replacing the battery, please refer to the instruction manual and pay attention to the positive and
negative direction of battery.
• Do not put the battery in the fire. Dispose of the battery according to local regulations.
FCC IDENTIFIER: 2A2FG-X9
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Product design and specifications are subject to change without prior notification. This product is designed and
intended for use by those 14 years of age and older.
© 2021 Celestron • All rights reserved
celestron.com/pages/technical-support
Telephone: [phone]
2835 Columbia Street • Torrance, CA 90503 U.S.A.