CEM Systems Intruder Interface AC2000 SIA User manual
FEATURES
www.cemsys.com
OVERVIEW
The SIA Intruder Interface with AC2000 SE enables alarms from intruder detection
systems to be displayed using a single alarm display screen.
Intruder detection panels are added to AC2000 SE as separate devices with alarms
generated by the panels forwarded to AC2000 SE over an Ethernet network using
the SIA protocol. Each panel is added to the system in groups of 8 or 16 inputs
using a user friendly application which simplifies the configuration of larger
intruder panel systems by automatically creating and addressing entries in the
AC2000 devices table thereby greatly reducing the amount of data the operator
must enter.
Alarms from the intruder panels are sent to AC2000 SE where the SIA codes
are extracted and mapped to AC2000 system alarms. These alarms are treated
like all other alarms on the access control system where they can be sent to
the AED (Alarm and Event Display) application for visual annunciation and
acknowledgement. Alarms can also activate other systems, such as CCTV matrix,
or be used to cause video images to be recorded on a compatible digital video
management system (DVMS).
•Seamlessintegrationwith
intruder detection systems
•Activatedalarmsshowninstantly
within AC2000 AED (Alarm and
Event Display) module
•Alarmzoneiconscanbeplaced
on to graphical maps in AED
module alongside access control
readers
•Simplecongurationtoolto
create entire intruder detection
systems within AC2000
•Displaysupto64differentalarms
groups that can contain numerous
SIA alarms
•CompatiblewithmultipleIntruder
detection systems
AC2000 SIA Intruder Interface
Interface for Intruder Detection System Integration
CEMSystemsLtdUnit4RavenhillBusinessParkRavenhillRoadBelfastBT68AWNorthernIreland
Ease of Configuration
A configuration application allows the simple creation of
intruderpaneldeviceswithintheAC2000SEsystem.Bygiving
theintruderpanelaname,selectingthenumberofzones
and stating the starting address, the module automatically
populates the AC2000 Device table with the required number of
individuallyaddressedzones,eachproviding8or16inputs.
This greatly reduces the amount of operator input required.
SIA Module
The SIA module with AC2000 SE accepts alarm information from
any compatible intruder alarm panel conforming to the industry
standardSIAprotocolSIADC-03-1990.Alarmsgeneratedby
the intruder system are stored in the system database and can
either be displayed on the AC2000 AED (Alarm Event Display) or
forwardedontoa3rdpartysystems,e.g.CCTV,viatheExternal
Systems Interface.
Alarm Displaying
Alarms displayed within AED can be acknowledged and
cancelled from the CDC server like any other alarm from
theaccesscontrolsystem.Note:theSIAInterfacewillnot
acknowledge or cancel alarms at the intruder panel. This must
still be done manually or via dedicated software.
External Systems
The AC2000 system is designed to link to other systems and
applications when predefined alarm are activated. The External
Systems application allows the user to specify the format of
serial strings that are to be sent to a system connected to the
main server (CDC).
Intruder Panel Compatibility
DSC-PowerSeriesRange
with T-Link Ethernet Communicator
DSC - Maxsys Range
with T-Link Ethernet Communicator
Honeywell - Galaxy *
with E080 Ethernet module
SOFTWARE HIGHLIGHTS
CEM/B/108
Productspecicationsandavailabilityissubjecttochangewithoutnotice.Certainproductnamesmentionedhereinmaybetradenamesand/orregistered
trademarks of their companies.
* Configuration of panels may vary depending on the Intruder Detection Systems and panel used.
This manual suits for next models
1
Other CEM Systems IP Access Controllers manuals
