Central Pneumatic 69473 Datasheet
Visit our website at: http://www.harborfreight.com
Read the separate High Speed Air Cutter Safety Warnings,
Installation and Operation Instructions before using this
product. Failure to do so can result in serious injury.
SAVE THIS SPECIFICATION SHEET AND THE HIGH SPEED
AIR CUTTER SAFETY WARNINGS, INSTALLATION AND
OPERATION INSTRUCTIONS FOR FUTURE REFERENCE.
Copyright©2012 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ITEM 69473
3" high speed air cutter
Specications
Maximum Wheel Size
Arbor Size
Air Inlet Fitting Size
Maximum Speed*
Air Consumption
Accessories Hex Key, Wrench
* Maximum speed at stated maximum air pressure.
Excess air pressure is hazardous and may cause
the tool to exceed stated maximum speed.
For technical questions, please call 1-800-444-3353. SKU 69473
PLEASE READ THE FOLLOWING CAREFULLY
Parts List and Assembly Diagram
Part Description Qty
1 Screw M6*20 1
2 Fixing Washer 1
3 Cuting Disc
(Not Included)
0
4 1
5 Spindle 1
6 1
7 Retainer 1
8 Bearing 6000 1
9 1
Part Description Qty
10 Steel Ball 2.35 3
11 Rotor 1
12 Blade 4
13 Cylinder 1
14 1
15 Bearing 626 1
16 Body 1
17 Exhaust 1
18 Air Inlet 1
19 Filter 1
Part Description Qty
20 1
21 Throttle 1
22 1
23 O-Ring 8*1.5 1
24 O-Ring 9*1.9 1
25 1
26 O-Ring 18*3 1
27 Fixing Screw 1
28 Washer 1
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Other Central Pneumatic Cutter manuals
