Centrometal CM WiFi-box Owner's manual

HEATING TECHNIQUE
for connecting of CM WiFi-Box
to the boilers PelTec, Cm Pelet-set touch,
EKO-CKS P UNIT, EKO-CKS Multi Plus,
BioTec-L, BioTec Plus
Technical instructions
BEFORE ANY WORK ON THE BOILER, ELECTRIC ENERGY MUST BE SWITCHED OFF!
2.1 OPTION - FROM EXISTING ADDITIONAL EQUIPMENT
PELTEC, CM PELET-SET TOUCH, BIOTEC-L >>> switch off the boiler and remove the plug from the socket.
EKO-CKS P UNIT, EKO-CKS Multi Plus >>> switch off the boiler and set MAIN SWITCH on junction box to "OFF"
1.0. DELIVERY CONTENT
UTP cable
1X
CM WiFi-Box
1X
CM WiFi-box
ENG
2.0 CONNECTING CM WIFI-BOX TO THE BOILER BY UTP CABLE
UTP
CM WiFi-box
CM WiFi-box
UTP
BioTec-Plus - to the free UTP
connector (in the UTP splitter)
on board with connectors inside
of boiler electronic.
UTP
UTP
Cm Pelet-set touch to the UTP connector-
on the back side of CPREG-touch
(example)
CM2K
UTP cable
UTP cable
UTP cable
CONNECT TO NEXT
ADDITIONAL
EQUIPMENT
(only if exist)
At the bottom of the CM WiFi box
is a sticker with which you can
attach WiFi-box to the wall, boiler
etc.
UTP cable CONNECT TO NEXT
ADDITIONAL EQUIPMENT
(only if exist)
PelTec - on the rear board with connectors
UTP cable
Regulation CPREG-Touch
BioTec-L - on board with
connectors inside of boiler
electronic
EKO-CKS P UNIT and EKO-CKS Multi Plus - to the free
UTP socket on the bottom of boiler junction box. (The
boiler control automatically recognizes Cm WiFi-box
without regardless of which UTP socket is connected).
2.2 OPTION - DIRECTLY FROM BOILER
UTP
Splitter

3.0 CONNECTING TO HOME WiFi NETWORK
When you have successfully connected CM WiFi-box, turn on the boiler. A new widget appears on the main screen showing the connection of internet supervision. If the widget doesn't appear on
the main screen means that the CM WiFi box is not properly connected to the boiler. If you see this widget, the new option "Internet supervision" will be visible under the "Operation" shortcut.
CM-WiFi
Type name of your home wireless network. The
"name field" is case sensitive. Use your computer or
mobile phone to search for WiFi network and see
the exact name of your home WiFi network.
networks
Connected
Type a password of your home WiFi network. Text fields are case-sensitive and
you must enter the correct password. When you type a password, press the
confirmation button and exit to the main screen. If you see green text
"CON" on the main screen, it means that regulation is successfully connected
with home WiFi network and boiler successfully communicates with the web
server.
Regulation is connected with home network and
with web portal (internet supervision is possible)
Green LED diode
on WiFi box is blinking
Regulation is not connected with home network and
with web portal (internet supervision is not possible)
The LED is continuously illuminated.
The LED is continuously
illuminated
CM WiFi-box requires active DHCP server of Access Point (e.g. router)
because manual setting of network parameters is not possible.
For more informations contact administrator of your home network.
PelTec, BioTec-L Cm Pelet set, EKO-CKS P UNIT, EKO-CKS Multi Plus
Wifi ID: 7B****C9 First connection: 12-7-2017-13:05
VIDEO INSTRUCTIONS
In order to be able to use internet supervision and
management, you must be registered on the portal with your
email address and the identification number of the CM-WiFi
box (WiFi ID).
You can see the registration procedure on the video
instructions. Please scan QR code with your smartphone or
open web page from link below.
http://www.centrometal.hr/internet-portal-instructions
3.1 INSERT WIFI NETWORK NAME (NAME OF YOUR WIFI HOME NETWORK)
3.2 INSERT WIFI PASSWORD (HOME NETWORK PASSWORD)
x
x
3.3 FIND WIFI ID ON REGULATION "INFO" TAB AND WRITE IT DOWN ON PAPER
4.0 REGISTER ON INTERNET PORTAL
x
x
If the CM WiFi-box was able to connect to the web portal at least once, in the tab " INFO" appears time of first
connection. If you see the time of first connection then you can go to the web portal and start with registration procedure.
CON