Challenge 265 User manual

The

Challenge Machinery Company provides owner's

manuals on its products solely as a courtesy to its customers.

See the information below before using this manual.

These manuals are for reference only. These manuals include products which are non-

current, unsupported or no longer produced by The Challenge Machinery Company, and are

provided solely as an accomodation to our customers. By providing these manuals, The

Challenge Machinery Company makes no representation or warranty as to the products,

their current condition, or their suitability or fitness for use in any particular application, which

are the sole and independent responsibility of the product owner and user.

Older products may not comply with current safety procedures, guidelines or regulations,

and it is the product owner's and user's responsibility to evaluate the suitability and fitness of

the products in their current use and application. The Challenge Machinery Company makes

no representation, warranty or recommendation regarding any modifications which may be

required on non-current or unsupported products. The Challenge Machinery Company

assumes no liability for any modification or alteration to any Challenge product, and any such

modification or alteration to any Challenge product is not authorized by The Challenge

Machinery Company. The availability of these manuals is solely for the purpose of providing

reference information for the products.

This

manual

may not be

complete

in all aspects of

product

maintenance

and

repair.

All

products should be used only by qualified and properly trained personnel, following proper

safety procedures. All products should be regularly inspected and maintained, and their condition,

application and use should be periodically evaluated by qualified personnel. Only qualified and

properly trained technicians should perform maintenance,

repair

and replacement

procedures. Attempting

hese procedures without proper training

may

cause

machine

damage or

operator

injury!

Products

may be

unsupported by The Challenge Machinery Company

due to age or the

unavailability

of parts from their

original manufacturer.

No parts or

product support

will be

available

to repair or

maintain unsupported

products.

Older

products

may not be UL

listed (if

the product does not have a UL label it is not a listed product), and may not comply with

applicable installation or other regulations or requirements if

relocated

to a new

facility.

Many

municipalities require

product

to be UL

listed

before

electrician

will

connect

power

to them. Often the cost of updating an older product to comply with current safety regulations is

greater than the value of the product.