Champion Model 66 WSPW Gas User manual

Project
Item No.
Quantity
(1M) 4/06 Printed in U.S.A.
CH098
Gas Heated Water Saver
High Temperature Rack Conveyor
Single-tank Dishwashing Machine with Prewash
66 WSPW 66"
66WSPW GAS RACK CONVEYOR
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: [phone] Fax: [phone]
www.championindustries.com
Gas
Gas Heating
Systems
SPECIFIER STATEMENT
Specified unit will be Champion model 66WSPW gas
heated water saver high temperature rack conveyor
single-tank dishwashing machine with prewash.
Features top mounted control cabinet; upper and lower
one-piece stainless steel spray arm assemblies, removable
internal scrap basket with two-piece scrap screen. Large
15-1/2" prewash and 26" wash and door with front access and
double-hook safety latch. Anti-jam conveyor drive system.
1 year parts and labor warranty.
Single
Source
STANDARD FEATURES
• Dual-pawl cradle drive system
• One-piece cast stainless steel upper
& lower spray arm assemblies
• Internal removable scrap baskets with
two-piece scrap screens
• Standard vertical opening accommodates
18" x 26" sheet pans
• Wide 15-1/2" and 26" leakproof doors,
internally-fitted
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Common utility connections
• Door safety switch
• Door activated drain closures
• Enclosure panels (front and sides)
• Splash shields
• Low-water tank heat protection
• Rinse-saver device
• Stainless steel heavy-gauge construction,
including base and feet
• Prewash pump 1 Hp motor
• External prewash scrap basket
• Wash pump 2 Hp motor
• Stainless steel pumps and impellers
• Single-point electrical connection

Gas Heated Water Saver
High Temperature Rack Conveyor
Single-tank Dishwashing Machine
66WSPW GAS RACK CONVEYOR
Dimensions shown in inches
Warning: Gas burner intake and exhaust venting required in
accordance with local codes. Exhaust must be vented outside.
Warning: Plumbing, gas and electrical connections should be made
by qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply line at
service connection.
Gas
12"
49-1/2"
6"
25"
28-1/2"
36"
44"
6"
8"
12-1/2"
16"
2"
2"
1A
4B
5
5
4A
3A 3A
42-1/2"
39-5/8"
29-3/4"
27-3/4"
8-3/4"
5-3/4"
7-3/4"
12" 12"35-7/8"
47-7/8"
59-7/8"
6-1/4"
11-7/8"
20-3/4"
1-1/2"
24-1/8"
3-3/4"
13"
27-3/8"
23-3/8"
2
6B
3B
2
1B
6B
3B
4
1B
6C
6" Nom.
Wall
2 "
CONTROL
CABINET
22"
25"
30-5/8"
30-5/8"
2-3/8"
3-5/8"
20-1/8"
2-1/2"
33"
OPENING
INS. TRACK
Left-to-Right Operation
5"
26
Door
20-3/4"
Clear
34"
Load
Height
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
12"
Plumbing
Clearance
Cowl Cowl
7"
5"
2-3/4"
3C
3A
1B
23B
4B
60"
44"8" 8"
4"4" 1A
4A
6
7-1/4"
13-3/4"
19-5/8"
25-3/4"
31-1/8"
HATCO
GAS BOOSTER
MOD. # PMG-200
Front View
Plan View
Left-to-Right Operation
Volume crated: 252 cu. ft.
Shipping weight crated: 1550 lbs.
Details, Dimensions & Connections
Utilities
1 Electrical
A. Machine connection (see box)
B. Booster connection requires 15 amps
@ 120/60/1
2 Hot Water
3/4" NPT 140°F hot water connection.
Flow pressure 25 psi.
3 Drain
A. 1-1/2 NPT machine connection.
B. T/P relief valve to open drain
C. 1/2" NPT vent to open drain
4 Vents
(Dishwasher) (4" x 16" outside)
A. Load end: 200 CFM @ 1/4" S.P.
B. Unload end: 400 CFM @ 1/4" S.P.
5 Gas
3/4" NPT requires: LP Gas – 52 CFH for 130,000
BTU/hr. Natural Gas – 130 CFH for 130,000 BTU/hr.
6 Gas Flue
4" OD exhaust
A. Left end of booster (specify when ordering)
B. Rear of booster (specify when ordering)
Machine Load Amps
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 16 20 20
240/60/1 15 20 20
208/60/3 8 15 15
240/60/3 8 15 15
480/60/3 4 15 15
575/60/3 3 15 15

Gas Heated Water Saver
High Temperature Rack Conveyor
Single-tank Dishwashing Machine
66WSPW GAS RACK CONVEYOR
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: [phone] • www.championindustries.com
SPECIFICATIONS
Capacities
Racks per hr. (NSF) 126
Wash tank (gal.) 20
Conveyor speed (ft./min.) 3.5
Motor horsepower
Drive 1/6
Prewash 1
Wash 2
Water consumption
Gal. per hr. (Max. use) 124
Temperatures °F
Wash 160
Rinse 180
Heating
Tank heat booster, gas
Natural 130,000 BTU/hr.
LP 130,000 BTU/hr.
40° rise & 70° rise booster
Natural 200,000 BTU/hr.
LP 200,000 BTU/hr.
Venting
Load end (minimum cfm) 150
Unload end (minimum cfm) 400
Standard 20" x 20" Rack Complement
Flat 1
Peg 2
Gas
2-3/4" Front View
3C
1B4
23B5
6B
6A
3A
1A
7-1/2"
8-3/4"
13-3/4"
18-1/2"
26-1/8"
31-1/2"
5"
26
Door
Cowl
4"
8"
20-3/4"
Clear
34"
Load
Height
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
Right-to-Left Operation
66"
22"
82"
15-1/2"
Door
PRE
WASH
5"
4"
8"
Cowl
Front View
1'
120-1/2"
42-1/2"
39-5/8"
29-3/4"
27-3/4"
6"
66"
8-3/4"
5-3/4"
7-3/4"
12" 12"35-7/8"
47-7/8"
59-7/8"
13-1/4"
20-3/4"
1-1/2"
24-1/8"
11-1/8"
5-1/4"
27-3/8"
23-3/8"
2
4
5
3B
3C
1A
6B
6A
3A
2
1B
5
3B
4
1B
3C
36"
8"
16"
2"
22"
25"
16"
6"
2"
6-1/2"
7-1/2"
6" Nom.
Wall
2 "
CONTROL
CABINET
22"
25"
30-5/8"
30-5/8"
2-3/8"
3-5/8"
20-1/8"
2-1/2"
33"
OPENING
INS. TRACK
2-1/4"
1-3/4"
1-1/2" Can be up
to 10"
5/8"
21"
8"
Plan View
Right-to-Left
Operation
Suggested
Table
Construction
Note: The booster and machine come fully interplumbed complete
with a blended phosphate water treatment system, pressure
regulating valve, water hammer arrestor, ASME temperature and
pressure relief valve, drain valve, circulator pump, and temperature
gauges installed and ready for connection to your water supply.
Venting Notes: Fabricated duct size: 3-7/8" x 15-7/8" (Outside
dimensions)
Note: Specify vent location option on booster when ordering.

Gas Heated Water Saver
High Temperature Rack Conveyor
Single-tank Dishwashing Machine with Prewash
66 WSPW 66"
66WSPW GAS RACK CONVEYOR
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: [phone] • www.championindustries.com
Gas
OPTIONS & ACCESSORIES
Blower-dryer with 60" hood, table, legs and
cradle bar assembly
Cantilever sideloader (with or without hood) for 90°
load operation (see Table Systems catalog sheet)
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack curve (specify load or unload)
(see Table Systems catalog sheet)
180° Motorized rack curve (specify load or unload)
(see Table Systems catalog sheet)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Table limit switch, unmounted
(recommended on all rack conveyor installations)
Vent cowl, stainless steel with 7" stack and
locking damper
Extended vent hood, stainless steel with 7"
stack and locking damper
Water pressure regulating valve (unmounted)
Vent fan control switch
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24"
(instead of standard 20-3/4") for large ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)