Char-Broil 03505788 User manual

Arch Fireplace 03505788 / 42803959 (07-23-03)
WARNING
NEVER LEAVE FIRE UNATTENDED!
Do not allow small children near flame. Hot embers can
fly out of ring in breezy conditions. Adequate fire
extinguishing material should be readily available.
WARNING
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon
monoxide, which has no odor. NEVER burn charcoal
inside homes, vehicles or tents.
Read and follow all safety statements, warnings,
assembly instructions and use & care directions before
attempting to assemble.
CAUTIONCAUTION
Some parts may contain sharp edges – especially as
noted in manual. Wear protective gloves if necessary.
WARNING
Do not use this unit on a wood deck or on combustible
surfaces such as dry grass, leaves, mulch, etc. Do not
use this unit near heat sensitive or combustible structures
such as vinyl or wood siding.
FOR OUTDOOR USE ONLY!
MODEL 03505788 • Assembly Instructions
Arch Fireplace
Tools needed for assembly: Phillips screwdriver • Adjustable wrench
CAUTION
THIS UNIT IS HEAVY!
DO NOT assembly without a helper.

STOP!
Missing a part?
No need to go back to the store!
The store where you made your purchase
does not stock parts for this item. If you
need parts, whether they are missing or
damaged, call the Customer Service toll
free Help Line.
Call us and we will gladly ship
the part you need
FREE OF CHARGE.
Call Our Help Line
Parts List
Item Description
55700429 Base Kit
55700430 Firebox Kit
55700431 Side Panel Kit
55700432 Top Kit
40011188 Carton
29100105 Hood Cap
29100101 Screen
29000384 Ash Drawer
29100106 Log Rack
42000003 Hardware Bag
42803959 Assembly Instructions

1Attach the two side panels to the
firebox using three #10-24x1/2”
machine screws and three #10-24 keps
nuts on each side. It may be helpful to
have someone hold components in
place as you attach screws and nuts.
Firebox
Side
panel
Firebox
Side
panel
Side
panel
2FIRST, push the U-clips over the holes at the top of
the side panels, making sure that the FLAT sides of
the U-clips face inward.
NEXT, place the top between the side panels and
secure with two #10-24x1/2” machine screws on
each side. Screws should pass through the top
first, then into the U-clips on the side panels.
Flat side
inward U-clip
Top of
side panel
Top
Do This First

3Attach the base to the firebox using five 1/4-20x6” machine screws, 1/4-20 keps nuts, and spacers. Insert the five
screws into holes in the top of the firebox. Slide the spacers onto the screws. Fit the base onto the ends of the screws
and secure with keps nuts. It may be helpful to have someone hold components in place as you attach screws,
spacers, and nuts.
Base
4Slide an ash drawer into each side
of the fireplace.
Ash drawer
Ash drawer
Spacer
1/4-20x6”
Screw

5Place the log rack onto the firebox. Log rack legs
fit into holes in floor of firebox.
Log rack
6To attach front and rear screens (screens are identical), place bottom lip of screens over outer edges of firebox, and
lean screens against side panels.