Char-Broil Trentino04501109 User manual

04501109 / 42803986 (09-15-03)
WARNING
NEVER LEAVE FIRE UNATTENDED!
Do not allow small children near flame. Hot embers can
fly out of fire place in breezy conditions. Adequate fire
extinguishing material should be readily available.
WARNING
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon
monoxide, which has no odor. NEVER burn charcoal
inside homes, vehicles or tents.
Read and follow all safety statements, warnings,
assembly instructions and use & care directions before
attempting to assemble.
CAUTIONCAUTION
Some parts may contain sharp edges – especially as
noted in manual. Wear protective gloves if necessary.
WARNING
Do not use this unit on a wood deck or on combustible
surfaces such as dry grass, leaves, mulch, etc. Do not
use this unit near heat sensitive or combustible structures
such as vinyl or wood siding.
FOR OUTDOOR USE ONLY!
MODEL 04501109 • Assembly Instructions
Tools needed for assembly: Crosshead screwdriver • Adjustable spanner
CAUTION
THIS UNIT IS HEAVY!
DO NOT assembly without a helper.
Trentino Fireplace
TM

REORDER PARTS LIST
04501109 • 2
55700428 BASE KIT
55700261 FIRE PAN KIT
55700262 CORNER POST KIT
55700263 HOOD KIT
40011197 OUTER CARTON
41570010 SIDE SCREEN
29000035 HOOD CAP
41520001 LOG RACK
42000003 HARDWARE BAG
42803964 INSTRUCTIONS
EXPLODED DIAGRAM
7
3
1
2
6
5
4

2
1
3 • 04501109
Place (5) machine screws”D” into fire pan(2) and
base(1). Attach with (5) flange nuts”C”.
2
Each corner post(3) attaches with (2) screws”A” and (2) flange nuts”B”. Do not
tighten flange nuts until the top is attached
5X
5X
D
C
C
D
B
8X
A
8X
A
B
1
3

4
3
04501109 • 4
Place hood(4) on outside of corner posts(3). Secure each post with (2) screws”A” and (2) flange
nuts”B”. Tighten all flange nuts.
Set hood cap(6) onto hood.
4
3
6
A
8X
B
8X
BA

5
5 • 04501109
Place log rack(7) on fire pan.
Insert bottom of each screen(5) into slots and rest against corner posts.
7
5

WARNING
MOST SURFACES ON THIS UNIT ARE HOT WHEN IN USE.
USE EXTREME CAUTION. KEEP OTHERS AWAY FROM UNIT.
ALWAYS WEAR PROTECTIVE CLOTHING TO PREVENT INJURY.
HARDWARE LIST
Hardware is shown actual size. You may have spare hardware after assembly is complete.
#10-24x1/2”
Machine Screw
Qty: 16
#10-24
Flanged Hex Nut
Qty: 16
1/4-20x2-1/4”
Machine screw,
Qty: 5
1/4-20
Flanged Hex Nut
Qty: 5
ABCD
16X
16X 5X
5X
GB
SERVICE Char-Broil International L.L.C.
Bradley House
Bircholt Road
Parkwood,Maidstone,Kent, ME15 9XY
Phone [phone]
Fax [phone]
[email protected]
[email protected]
For Warranty and replacement parts