Chauvet Professional COLORdash Par-H7X User manual

Model ID: COLORDASHPARH7X
User Manual

COLORdash Par H7X User Manual Rev. 1
Edition Notes
The COLORdash Par H7X User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the COLORdash Par H7X as of the release date
of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and COLORdash are registered trademarks or
trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other
countries. Other company and product names and logos referred to herein may be trademarks of their
respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com.
Document Revision
This COLORdash Par H7X User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the latest version.

COLORdash Par H7X User Manual Rev. 1
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
FCC Compliance........................................................................................... 1
Safety Notes.................................................................................................. 2
Expected LED Lifespan................................................................................. 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 3
3. Setup ........................................................................................... 4
AC Power...................................................................................................... 4
AC Plug .............................................................................................................. 4
Power Linking..................................................................................................... 4
Fuse Replacement ............................................................................................. 4
DMX Linking.................................................................................................. 4
DMX Personalities.............................................................................................. 4
Remote Device Management (RDM) ................................................................. 4
Master/Slave Connectivity.................................................................................. 5
Mounting ....................................................................................................... 5
Orientation.......................................................................................................... 5
Rigging ............................................................................................................... 5
Procedure........................................................................................................... 5
4. Operation .................................................................................... 6
Control Panel Description ............................................................................. 6
Passcode ...................................................................................................... 6
Menu Map ..................................................................................................... 6
Configuration (DMX) ..................................................................................... 9
Control Personalities .......................................................................................... 9
Starting Address................................................................................................. 9
Control Channel Assignments and Values.................................................... 9
Configuration (Standalone) ........................................................................... 11
Fixed Color......................................................................................................... 11
Color Temperature ............................................................................................. 11
Manual Color Mixer ............................................................................................ 11
Auto Show.......................................................................................................... 11
Configuration (Settings) ................................................................................ 11
Master/Slave ...................................................................................................... 11
Dimmer Speed ................................................................................................... 11
White Balance .................................................................................................... 12

Table of Contents
COLORdash Par H7X User Manual Rev. 1
ii
LED Frequency .................................................................................................. 12
Back Light .......................................................................................................... 12
Key Lock ............................................................................................................ 12
Information ......................................................................................................... 12
Factory Reset..................................................................................................... 12
System Update................................................................................................... 12
5. Maintenance................................................................................ 13
Product Maintenance .................................................................................... 13
6. Technical Specifications ........................................................... 14
Contact Us ...................................................................................... 15
Warranty & Returns....................................................................................... 15

1
COLORdash Par H7X User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
• COLORdash Par H7X
• Seetronic Powerkon IP65 power cable
• Gel frame holder
• Gel frame
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function correctly
if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

2
Before You Begin
COLORdash Par H7X User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer
than 20 in (0.5 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special
cord or cord exclusively available from the manufacturer or its service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or its service
agent or a similar qualified person.
• The luminaire is intended for professional use only.
• CAUTION:
• This product’s housing may be hot when operating. Mount this product in a location with adequate
ventilation, at least 20 in (50 cm) from adjacent surfaces.
• When transferring the product from extreme temperature environments, (e.g., cold truck to warm
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing
a failure, allow the product to fully acclimate to the surrounding environment before connecting it to
power.
• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding
notification of strobe use.
• ALWAYS:
• Disconnect from power before cleaning the product or replacing the fuse.
• Replace the fuse with the same type and rating.
• Use a safety cable when mounting this product overhead.
• Connect this product to a grounded and protected circuit.
•DONOT:
• Open this product. It contains no user-serviceable parts.
• Look at the light source when the product is on.
• Leave any flammable material within 50 cm of this product while operating or connected to power.
• Connect this product to a dimmer or rheostat.
• Operate this product if the housing, lenses, or cables appear damaged.
• Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may
affect it (adhere to standards for the published IP rating).
• ONLY use the hanging/mounting bracket to carry this product.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher
temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower
temperatures.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• In the event of a serious operating problem, stop using immediately.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
If a Chauvet product requires service, contact Chauvet Technical Support.

3
COLORdash Par H7X User Manual Rev. 1
Introduction
2. Introduction
Description
The COLORdash Par H7X is a six pound die-cast portable RGBAW+UV LED wash with a precise palette
of subtle to saturated colors. Smooth 16-bit fading on four selectable dimming profiles, and multiple PWM
frequencies for flicker-free output, make the COLORdash Par H7X the perfect choice whether in the rig or
on the floor, live or on camera. Program easily through the OLED display or at a distance via RDM.
Features
• Rugged RGBAW+UV LED wash for events
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
• RDM (Remote Device Management) for added flexibility
• Selectable, smooth dimming curves for eliminate flicker and choppiness in fades
• Easy to read OLED display with password protection and touchscreen interface
• Advanced optics provide exceptional color mixing and high efficiency
• Double-bracketed yoke with omega bracket doubles as floor stand
Product Overview
Product Dimensions
Menu
buttons
OLED
display
DMX
in/out
Gel frame
holder clip
Power
in/out
Fuse
holder
Safety cable
pass-through
10.16 in
258 mm
9.45 in
240 mm
4.57 in
116 mm

4
Setup
COLORdash Par H7X User Manual Rev. 1
3. Setup
AC Power
The COLORdash Par H7X has an auto-ranging power supply and it can work with an input voltage range
of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
AC Plug
The COLORdash Par H7X comes with a power input cable terminated with a Seetronic Powerkon A
connector on one end and an Edison plug on the other end (U.S. market). If the power input cable that
came
with the product has no plug, or if the plug needs to be changed, use the table below to wire a plug.
Power Linking
It is possible to power link up to 16 COLORdash Par H7X products at 100 V, 20 products at 120 V, 34
products at 208 V, 38 products at 230 V, or up to 39 products at 240 V. Never exceed this number. Power-
linking cables can be purchased separately.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (T2AL, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORdash Par H7X can be linked to a DMX controller using a 3- or 5-pin DMX connection. If using
other DMX-compatible products with this product, it’s possible to control each individually with a single
DMX controller.
DMX Personalities
The COLORdash Par H7X uses a 3- or 5-pin DMX data connection for the 6CH, 8CH, 9CH, 13CH, and
14CH DMX personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the COLORdash Par H7X to work in these
personalities.
•TheControl Channel Assignments and Values section provides detailed information regarding the
DMX personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The COLORdash Par H7X supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.

5
COLORdash Par H7X User Manual Rev. 1
Setup
Master/Slave Connectivity
The Master/Slave mode allows an COLORdash Par H7X (the master) to control one or more
COLORdash Par H7X products (the slaves) without a DMX controller. One COLORdash Par H7X
becomes the master when running an auto program or in Static mode.
Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The COLORdash Par H7X comes with an adjustable yoke to which a mounting clamp (sold separately)
can be directly attached. Make sure the clamp is capable of supporting the weight of this product. For the
Chauvet Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
•TheOperation section of this manual provides detailed instructions on how to
configure the master and slaves.
•For more information about DMX standards or the DMX cables needed to link this product
to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.
Safety cable
Mounting clamp
Overhead mounting Surface mounting

6
Operation
COLORdash Par H7X User Manual Rev. 1
4. Operation
Control Panel Description
Passcode
When prompted, enter the following passcode: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
This passcode cannot be changed.
Menu Map
Refer to the COLORdash Par H7X product page on www.chauvetprofessional.com for the latest menu map.
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the selected value into the selected function
<UP> Navigates upwards through the menu list or increases the value when in a function
<DOWN> Navigates downwards through the menu list or decreases the value when in a function
Main Level Programming Levels Description
DMX Address 001–507 Sets the starting address
DMX
Channel
6CH 6-channel: RGBAWUV
8CH 8-channel: dimmer, RGBAWUV, strobe
9CH 9-channel: 16-bit dimmer, RGBAWUV, strobe
13CH
13-channel: dimmer, RGBAWUV, strobe, color
macro, color temperature, auto programs and
speed, dimmer mode
14CH
14-channel: 16-bit dimmer, RGBAWUV,
strobe, color macro, color temperature, auto
programs and speed, dimmer mode
Static Fixed Color
RRed
GGreen
BBlue
AAmber
WWhite
UV Ultraviolet (UV)
RG Red/Green
RB Red/Blue
RA Red/Amber
RW Red/White
RUV Red/UV
GB Green/Blue
GA Green/Amber
GW Green/White
GUV Green/UV
BA Blue/Amber
BW Blue/White
BUV Blue/UV
AW Amber/White
AUV Amber/UV
WUV White/UV
RGB Red/Green/Blue
RGA Red/Green/Amber
RGW Red/Green/White

7
COLORdash Par H7X User Manual Rev. 1
Operation
Static
(cont.)
Fixed Color
(cont.)
RGUV Red/Green/UV
RBA Red/Blue/Amber
RBW Red/Blue/White
RBUV Red/Blue/UV
RAW Red/Amber/White
RAUV Red/Amber/UV
RWUV Red/White/UV
GBA Green/Blue/Amber
GBW Green/Blue/White
GBUV Green/Blue/UV
GAW Green/Amber/White
GAUV Green/Amber/UV
GWUV Green/White/UV
BAW Blue/Amber/White
BAUV Blue/Amber/UV
BWUV Blue/White/UV
AWUV Amber/White/UV
RGBA Red/Green/Blue/Amber
RGBW Red/Green/Blue/White
RGBUV Red/Green/Blue/UV
RGAW Red/Green/Amber/White
RGAUV Red/Green/Amber/UV
RGWUV Red/Green/White/UV
RBAW Red/Blue/Amber/White
RBAUV Red/Blue/Amber/UV
RBWUV Red/Blue/White/UV
RAWUV Red/Amber/White/UV
GBAW Green/Blue/Amber/White
GBAUV Green/Blue/Amber/UV
GBWUV Green/Blue/White/UV
GAWUV Green/Amber/White/UV
BAWUV Blue/Amber/White/UV
RGBAW Red/Green/Blue/Amber/White
RGBAUV Red/Green/Blue/Amber/UV
RGBWUV Red/Green/Blue/White/UV
RGAWUV Red/Green/Amber/White/UV
RBAWUV Red/Blue/Amber/White/UV
GBAWUV Green/Blue/Amber/White/UV
RGBAWUV Red/Green/Blue/Amber/White/UV
Color
Temperature
Warm White 1
Preset white color temperatures
Warm White 2
Warm White 3
Neutral White 1
Neutral White 2
Neutral White 3
Daylight 1
Main Level Programming Levels Description

8
Operation
COLORdash Par H7X User Manual Rev. 1
Static
(cont.)
Color
Temperature
(cont.)
Daylight 2
Preset white color temperaturesDaylight 3
Daylight 4
Manual
Color Mixer
Red
000–255 Combine red, green, blue, amber, white, and
ultraviolet to make a custom color (0–100%)
Green
Blue
Amber
White
UV
Auto show Auto 1–5 001–100 Automatic programs and speed
Master/
Slave
Master DMX mode (Master)
Slave Slave mode
Dimmer
Speed
Off Linear dimmer
Dimmer1–3 Dimmer speed, fast (1) to slow (3)
White
Balance
Off Uses factory default white setting
Manual
Red
125–255
Sets maximum red value
Green Sets maximum green value
Blue Sets maximum blue value
Amber Sets maximum amber value
White Sets maximum white value
UV Sets maximum UV value
LED
Frequency
600Hz
Sets the Pulse Width Modulation frequency
1200Hz
2000Hz
4000Hz
6000Hz
25kHz
Back Light
10S Display turns off after 10 seconds
30S Display turns off after 30 seconds
2Min Display turns off after 2 minutes
Always On Display stays on
Key Lock On Locks the display. Passcode: <UP>,
<DOWN>, <UP>, <DOWN>, <ENTER>
Off
Information
Fixture Hours <_ _ _ _ _ H> Shows hours product has been on
Version <V_._ _ _ _ _ _> Shows the current firmware version
UID <_ _ _ _ _ _ _ _ _ _ _ _> Shows the product UID
Reset
Factory
NO Reset to factory default settings
YES
System
Update
Put the update file into the USB stick
and connect it to the device through an
adapter cable. Update firmware via USB to DMX adapter
cable
NO
YES
Main Level Programming Levels Description

9
COLORdash Par H7X User Manual Rev. 1
Operation
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the DMX Channel main level.
2. Select the desired personality from 6CH, 8CH, 9CH, 13CH, or 14CH.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the DMX Address main level.
2. Select the starting address (001–507).
• The highest assignable starting address for 6CH is 507.
• The highest assignable starting address for 8CH is 505.
• The highest assignable starting address for 9CH is 504.
• The highest assignable starting address for 13CH is 500.
• The highest assignable starting address for 14CH is 499.
Control Channel Assignments and Values
•SeetheStarting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
6CH 8CH 9CH 13CH 14CH Function Value Percent/Setting
–1111Dimmer 000 255 0–100%
––2–2Finedimmer 000 255 0–100%
12323Red 000 255 0–100%
23434Green 000 255 0–100%
34545Blue 000 255 0–100%
45656Amber 000 255 0–100%
56767White 000 255 0–100%
67878Ultraviolet 000 255 0–100%
–8989Strobe 000 010 No function
011 255 Strobe, slow to fast

10
Operation
COLORdash Par H7X User Manual Rev. 1
–––910Colormacro
000 010 No function
011 Red full
012 029 Red full, green increases
030 Red and green full
031 049 Green full, red decreases
050 Green full
051 069 Green full, blue increases
070 Green and blue full
071 089 Blue full, green decreases
090 Blue full
091 109 Blue full, red increases
110 Red and blue full
111 129 Red full, blue decreases
130 Red full
131 149 Red full, green and blue increase
150 Red, green, and blue full
151 169 Blue full, red and green decrease
170 Blue full
171 200 Red, green, and blue full
201 255 Color temperature, warm to cool
–––1011
Color
temperature
000 005 No function
006 025 Warm white 1
026 050 Warm white 2
051 075 Warm white 3
076 100 Neutral white 1
101 125 Neutral white 2
126 150 Neutral white 3
151 175 Daylight 1
176 200 Daylight 2
201 225 Daylight 3
226 250 Daylight 4
251 255 No function
–––1112
Automatic
programs
000 010 No function
011 060 Automatic program 1
061 110 Automatic program 2
111 160 Automatic program 3
161 210 Automatic program 4
211 255 Automatic program 5
– – – 12 13 Program speed 000 255 Automatic program speed, slow to fast
– – – 13 14 Dimmer mode
000 051 Preset dimmer speed from display menu
052 101 Linear dimmer
102 152 Dimmer mode 1 (fastest)
153 203 Dimmer mode 2
204 255 Dimmer mode 3 (slowest)
6CH 8CH 9CH 13CH 14CH Function Value Percent/Setting

11
COLORdash Par H7X User Manual Rev. 1
Operation
Configuration (Standalone)
Fixed Color
To select a preset fixed color combination:
1. Go to the Static main level.
2. Select the desired combination of R(red), G(green), B(blue), A(amber), W(white), and/or UV
(ultraviolet), from R, G, B, A, W, UV, RG, RB, RA, RW, RUV, GB, GA, GW, GUV, BA, BW, BUV,
AW, AUV, WUV, RGB, RGA, RGW, RGUV, RBA, RBW, RBUV, RAW, RAUV, RWUV, GBA, GBW,
GBUV, GAW, GAUV, GWUV, BAW, BAUV, BWUV, AWUV, RGBA, RGBW, RGBUV, RGAW,
RGAUV, RGWUV, RBAW, RBAUV, RBWUV, RAWUV, GBAW, GBAUV, GBWUV, GAWUV,
BAWUV, RGBAW, RGBAUV, RGBWUV, RGAWUV, RBAWUV, GBAWUV, or RGBAWUV.
Color Temperature
To select a preset color temperature:
1. Go to the Static main level.
2. Select the Color Temperature option.
3. Select the color temperature, from Warm White 1, Warm White 2, Warm White 3, Neutral
White 1, Neutral White 2, Neutral White 3, Daylight 1, Daylight 2, Daylight 3, or Daylight 4.
Manual Color Mixer
To manually mix a custom static color:
1. Go to the Static main level.
2. Select the Manual Color Mixer option.
3. Select the color value to alter, from Red, Green, Blue, Amber, White, or UV.
4. Set the value of the selected color, from 000–255.
Auto Show
To select an automatic program:
1. Go to the Auto show main level.
2. Select the program, from Auto 1–5.
3. Set the program speed, from 001–100.
Configuration (Settings)
Master/Slave
The Master/Slave mode allows a group of COLORdash Par H7X products (the slaves) to simultaneously
duplicate the output of another COLORdash Par H7X (the master) without a DMX controller.
To set each of the slaves:
1. Go to the Master/Slave main level
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level
2. Select Master.
3. Select a standalone setting.
Dimmer Speed
This setting determines how fast the output of the COLORdash Par H7X changes when the output value is
modified. It provides four different options to simulate the dimming curve of an incandescent lighting
product. To select a specific dimmer profile, do the following:
1. Go to the Dimmer Speed main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
• The master is the one that runs a program whether in Auto or Static mode.
• Do not connect a DMX controller to the products configured for Master/Slave operation. The
DMX controller may interfere with signals from the master.
• The master should be the first product in the daisy chain.
Off: The output is proportional (linear) to the dimmer channel value.
Dimmer 1–3: The output follows the dimmer value based on the corresponding dimmer curve,
Dimmer 1 being the fastest.

12
Operation
COLORdash Par H7X User Manual Rev. 1
White Balance
This setting determines the maximum output values for each color, which affects the appearance of the
total color output.
1. Go to the White Balance main level.
2. Select from Off (uses factory default white setting) or Manual (uses a custom white balance).
3. Select the color value to alter, from Red, Green, Blue, Amber, White, or UV.
4. Set the maximum value of the selected color, from 125–255.
LED Frequency
To adjust the frequency of the pulse width modulation:
1. Go to the LED Frequency main level.
2. Select the frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25kHz.
Back Light
To set how long before an inactive display will turn off:
1. Go to the Back Light main level.
2. Select the length of the backlight timer, from 10S (10 seconds), 30S (30 seconds), 2Min (2
minutes), or Always On.
Key Lock
To lock the display with a passcode:
1. Go to the Key Lock main level.
2. Select On (lock the display) or Off (unlock the display).
Information
To view essential product information:
1. Go to the Information main level.
2. Select Fixture Hours, Version, or UID.
Factory Reset
To reset the product to factory settings:
1. Go to the Reset Factory main level.
2. Select NO (to cancel) or YES (to reset the product configuration).
System Update
To update the firmware with a USB to DMX adapter cable:
1. Go to the System Update main level.
2. Follow the instructions (Put the update file into the USB stick and connect it to the device
through an adapter cable).
3. Select NO (to cancel) or YES (to update the firmware).

13
COLORdash Par H7X User Manual Rev. 1
Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

14
Technical Specifications
COLORdash Par H7X User Manual Rev. 1
6. Technical Specifications
Dimensions and Weight
Note: Dimensions in inches are rounded.
Power
Light Source
Photometrics
Thermal
DMX
Ordering
Length Width Height Weight
10.16 in (258 mm) 9.45 in (240 mm) 4.57 in (116 mm) 6 lb (2.7 kg)
Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz
Consumption 71 W 70 W 67 W 67 W 66 W
Operating Current 0.707 A 0.592 A 0.344 A 0.312 A 0.305 A
Power linking
current (products)
12 A
(16 products)
12 A
(20 products)
12 A
(34 products)
12 A
(38 products)
12 A
(39 products)
Fuse/Breaker T2AL, 250 V T2AL, 250 V T2AL, 250 V T2AL, 250 V T2AL, 250 V
Power I/O U.S./Worldwide UK/Europe
Power Input Connector Seetronic Powerkon IP65 Seetronic Powerkon IP65
Power Output Connector Seetronic Powerkon IP65 Seetronic Powerkon IP65
Power Cable plug Edison Local plug
Type Color Quantity Power Current Lifespan
LED Hex-color
RGBAW+UV 7 84 W 505 mA 50,000 hours
Beam Angle Field Angle Illuminance @ 5 m
22.7° 37.6° 522 lux
Maximum External Temperature Cooling System
113 °F (45 °C) Convection
I/O Connector Channel Range
3- and 5-pin XLR 6ch, 8ch, 9ch, 13ch, or 14ch
Product Name Item Name Item Code UPC Number
COLORdash Par H7X
COLORDASHPARH7X 10031874 781462222222
UL 1573
CSA C22.2 No. 166
E113093

15
COLORdash Par H7X User Manual Rev. 1
Contact Us
Contact Us
Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration.
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd. Voice: [phone]
Davie, FL 33314 Fax: [phone]
Voice: [phone] Email: [email protected]
Fax: [phone]
Toll Free: [phone] Website: www.chauvetprofessional.com
Chauvet U.K.
Address: Unit 1C Email: [e-mail]
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu
NG16 6NT
Voice: [phone]
Fax: [phone]
Chauvet Benelux
Address: Stokstraat 18 Email: [email protected]
9770 Kruishoutem
Belgium Website: www.chauvetprofessional.eu
Voice: [phone]
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
Email: [email protected]
France Website: www.chauvetprofessional.eu
Voice: [phone]
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Email: [email protected]e
Germany Website: www.chauvetprofessional.eu
Voice: [phone]
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
(Entrance by Calle 2)
Email: [email protected]
Zona Industrial Lerma Website: www.chauvetprofessional.mx
Lerma, Edo. de México, CP 52000
Voice: [phone]