Chauvet HIVE User manual

User Manual

Page 2 of 19 HIVE™ User Manual
TABLE OF CONTENTS
1. Before You Begin...........................................................................................................3
What Is Included .........................................................................................................................3
Unpacking Instructions................................................................................................................3
Claims.................................................................................................................................................3
Text Conventions ........................................................................................................................3
Symbols......................................................................................................................................3
Disclaimer...................................................................................................................................3
Product at a Glance.....................................................................................................................4
Safety Notes ...............................................................................................................................4
2. Introduction....................................................................................................................5
Overview.....................................................................................................................................5
Dimensions.................................................................................................................................6
3. Setup...............................................................................................................................7
AC Power....................................................................................................................................7
Fuse Replacement...............................................................................................................................7
Power Linking......................................................................................................................................8
Mounting.....................................................................................................................................9
Orientation...........................................................................................................................................9
Rigging................................................................................................................................................9
4. Operation......................................................................................................................10
Control Panel Operation............................................................................................................10
Menu Map.................................................................................................................................10
Configuration (DMX)..................................................................................................................11
Starting Address ................................................................................................................................11
DMX Personality................................................................................................................................11
HIVE™ Sections for DMX Control..............................................................................................11
DMX Channel Modes, Assignments, and Values.......................................................................12
20-Channel........................................................................................................................................12
3-Channel..........................................................................................................................................13
Configuration (Standalone)........................................................................................................14
Auto Program including Sound-Active Mode .......................................................................................14
Custom Color Mixing and Strobe Settings..........................................................................................15
Display Orientation.............................................................................................................................15
Display Background Light...................................................................................................................15
Software Version................................................................................................................................15
Master/Slave Mode............................................................................................................................16
5. Technical Information..................................................................................................17
Product Maintenance ................................................................................................................17
6. Technical Specifications..............................................................................................18
Returns.....................................................................................................................................19
Contact Us................................................................................................................................19

HIVE™ User Manual Page 3 of 19
1.BEFORE YOU BEGIN
What Is
Included
•HIVE™
•Power Cord •Warranty Card •Quick Reference Guide
Unpacking
Instructions
Carefully unpack the product immediately
and check the container to make sure all the
parts are in the package and are in good condition.
Claims
If the box or the contents (the product and
included accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as
missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Text
Conventions
Convention Meaning
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Not
following these instructions may make the product not work, cause
damage to the product, or cause harm to the operator.
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
Disclaimer
The information and specifications contained in this User Manual
are subject to change
without notice. CHAUVET® assumes no responsibility or liabil
ity for any errors or
omissions, and reserves the right to revise or recreate this manual at any time.
Download the latest version from www.chauvetlighting.com.
© Copyright 2013 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author
Date
Editor
Date
A.Leon 06/25/13 T. Yeago 06/25/13

Page 4 of 19 HIVE™ User Manual
Product at a
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
These notes include important information about the mounting, usage, and maintenance
of this product; read before using the product.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning or replacing
the fuse.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a
safety cable.
•Make sure there are no flammable materials close to the product when operating.
•
Do not touch the product’s housing when operating because it may be very hot.
•Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer.
•Make sure to replace the fuse with another of the same type and rating.
•Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
•The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
•This product is not intended for permanent installation.
•Keep this User Manual for future use. If you sell the product to another user, be
sure to give this document to the next owner.

HIVE™ User Manual Page 5 of 19
2.INTRODUCTION
Overview
LED Display
ControlButtons
DMX In
DMX Out
Safety Loop
Microphone
Power Out
Fuse Holder
Power In
Back Panel View
Indicator
Lights

Page 6 of 19 HIVE™ User Manual
Dimensions
13 in
330 mm
8.8 in
225 mm
9.4 in
240 mm

HIVE™ User Manual Page 7 of 19
3.SETUP
AC Power
The HIVE™ has an auto-
ranging power supply and it can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect the product to a protected circuit
(circuit breaker or fuse). Make
sure the product has
an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect the product to
a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0–100% switch.
Fuse
Replacement
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with the same type and rating.
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

Page 8 of 19 HIVE™ User Manual
Power Linking
The product
provides power linking via the Edison/IEC outlet located in the back of the
unit.
Power Linking
Diagram
You can power link up to 5 HIVE™ units on 120 VAC or up to 10 HIVE™ units on
230 VAC.
The power linking diagram shown above corresponds to the North American
version of the product ONLY! If using the product
in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
1st Product
2nd Product
3rd Product
Additional Products

HIVE™ User Manual Page 9 of 19
Mounting
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The HIVE™
may be mounted in any position; however, make sure adequate ventilation
is provided around the product.
Rigging
•Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
•Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications).
•When mounting the product overhead, always use a safety cable.
Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13-mm holes, which are
appropriate
for this purpose.
•When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•The bracket adjustment knobs allow for directional ad
justment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•The mounting bracket allows for surface mounting. When mounting the product on
the floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
Bracket
Adjustment
Knobs
Mounting Bracket
Mounting Clamp
Safety Cable

Page 10 of 19 HIVE™ User Manual
4.OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Menu Map
Main Level
Programming Levels
Description
Addr 001–512 Sets the DMX starting address
CHnd 3CH 3-channel mode
20CH 20-channel mode
SLnd SL-0 Slave mode 0
SL-1 Slave mode 1 (reserved for future use)
AUto
rUn
Auto program
CoLo
rEd
0–255
Red (0–100%)
GrEE 0–255 Green (0–100%
bLUE 0–255 Blue (0–100%)
So1 Strobe, slow speed
So2
Strobe, medium speed
So3 Strobe, fast speed
LEd on LED background light on
oFF LED background light off
dISP dISP Normal display
dSIP Inverted display
VEr
Shows currently installed software version
The programming level Slave mode 1 (SL-1) may or may not show on the product’s
display. When selecting the Slave mode, use SL-0. Slave mode 1 (SL-1) is reserved
for future use.

HIVE™ User Manual Page 11 of 19
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you
choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The HIVE™ uses up to 20 DMX channels in its 20-channel
DMX mode, which defines the
highest configurable address to 493.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
DMX Personality
The HIVE™ has two DMX personalities, a 3-channel mode and a 20-channel mode.
To choose a DMX personality, follow the steps below:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> to select CHnd.
3. Press <ENTER> and either 3CH (3-channel mode) or
20CH (20-channel mode) shows on the display.
4. Use <UP> or <DOWN> to select the desired DMX personality.
5. Press <ENTER>.
HIVE™ Sections for DMX Control
1 2 3
4 5 6

Page 12 of 19 HIVE™ User Manual
DMX Channel Modes, Assignments, and Values
20-Channel
Channel Function Value Setting Pod
1
Red
000 ó255
0–100%
1
2
Green
000 ó255
0–100%
3
Blue
000
ó
255
0–100%
4
Red
000 ó255
0–100%
2
5
Green
000 ó255
0–100%
6
Blue
000 ó255
0–100%
7
Red
000 ó255
0–100%
3
8
Green
000 ó255
0–100%
9
Blue
000 ó255
0–100%
10
Red
000 ó255
0–100%
4
11
Green
000 ó255
0–100%
12
Blue
000 ó255
0–100%
13
Red
000 ó255
0–100%
5
14
Green
000 ó255
0–100%
15
Blue
000 ó255
0–100%
16
Red
000 ó255
0–100%
6
17
Green
000 ó255
0–100%
18
Blue
000 ó255
0–100%
19
Strobe
000 ó255
0–100%
20 Auto Program
000 ó001
002 ó255
No function
Auto program, slow to fast

HIVE™ User Manual Page 13 of 19
3-Channel
Channel Function Value Setting
1 Auto Programs
000 ó004
005 ó020
021 ó035
036 ó050
051 ó065
066 ó080
081 ó095
096 ó110
111 ó125
126 ó140
141 ó155
156 ó170
171 ó185
186 ó200
201 ó215
216 ó230
231 ó245
246 ó255
No function
Auto Program 1
Auto Program 2
Auto Program 3
Auto Program 4
Auto Program 5
Auto Program 6
Auto Program 7
Auto Program 8
Auto Program 9
Auto Program 10
Auto Program 11
Auto Program 12
Auto Program 13
Auto Program 14
Auto Program 15
Auto Program 16
(Auto Programs 1–15 in sequential order)
Sound-Active
2
Strobe
000 ó255
Slow to fast
3
Speed
000 ó255
Auto programs speed, slow to fast

Page 14 of 19 HIVE™ User Manual
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (either Static,
Auto, or Sound-Active) to a DMX string connected to a DMX controller. Products
in standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Auto Program
including
Sound-Active
Mode
To enable the auto (Sound-Active) program, follow the instructions below:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> until AUto shows on the display.
3. Press <ENTER> and rUn shows on the display.
4. Press <ENTER>.
NOTE: While in Auto Program mode, the HIVE™ will respond to sound.
The product will only respond to low frequencies of music (bass and drums).

HIVE™ User Manual Page 15 of 19
Custom Color
Mixing and
Strobe Settings
To custom mix a color and select the strobe speed, do the following:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> until CoLo shows on the display.
3. Press <ENTER> and one of the following shows on the display:
•rEd (red)
•GrEE (green)
•bLUE (blue)
•So1 (strobe, slow speed)
•So2 (strobe, medium speed)
•So3 (strobe, fast speed)
4. Use <UP>or <DOWN> to select the desired color or the strobe speed setting.
5. When the desired color or strobe speed shows on the display, press <ENTER>.
With the color options, after pressing <ENTER>, the color value 0–255 (0–100%)
shows on the display. Use <UP> or <DOWN> to select the desired color value.
NOTE: Selecting 0will turn the color off.
6. Press <ENTER> to set the color value/strobe speed.
7. Repeat steps 4 to 6 until you have your desired color and strobe speed.
NOTE: For no strobe effect, do not press <ENTER> when a strobe option shows on
the display
Display
Orientation
You are able to flip the LED display for easy readability in any mounting situation.
To select your display’s orientation, follow the instructions below:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> until dISP shows on the display.
3. Press <ENTER> and use <UP>or <DOWN> to select dISP (normal display) or
dSIP (inverse display).
4. Press <ENTER>.
Display
Background Light
You can select whether the display’s background light stays on or off after control panel
inactivity.
To select either option for the display’s background light, follow the instructions below:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> until LEd shows on the display.
3. Press <ENTER> and on or oFF shows on the display.
4. Use <UP> or <DOWN> to select the desired option.
5. Press <ENTER>.
Software Version
With the HIVE™ you can access which is the currently installed software version.
To access this information, do the following:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> until VEr shows on the display.
3. Press <ENTER>.

Page 16 of 19 HIVE™ User Manual
Master/Slave
Mode
The Master/Slave mode allows a single HIVE™
unit (the “master”) to control the actions
of one or more HIVE™
units (the “slaves”) without the need of a DMX controller. The
master unit will be set to operate in Auto Program
mode, while the slave units will be set
to operate in a Slave mode (SL-0 or SL-1). Once set and connected, the slave units will
operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> to reach the menu’s main level and Addr shows on the display.
2. Use <UP> or <DOWN> until SLnd shows on the display.
3. Press <ENTER> and SL-0 (Slave mode 0) shows on the display.
NOTE: In addition to SL-0, SL-1 may or may not show on the display. The SL-1
option is reserved for future use.
4. If both SL-0 and SL-1 show on the display, use <UP> or <DOWN> to select SL-0.
5. Press <ENTER>.
6. Connect the DMX input of the first slave unit to the DMX output of the master unit.
7. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
8. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in Auto Program mode.
2. Make the master unit the first unit in the DMX daisy chain.
•Configure all the slave
units before connecting the master unit to the DMX
daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller
may interfere with the signals from the
master unit.
•Do not connect more than 31 slave units to the master unit.

HIVE™ User Manual Page 17 of 19
5.TECHNICAL INFORMATION
Product
Maintenance
Dust build-
up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
•Unplug the product from power.
•Wait until the product is at room temperature.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
•Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
•Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•Softly wipe any dirt or grimeto the outside edges of the external optics or
glass/transparent surface.
•Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent
surfaces carefully after
cleaning them.
Do not spin the cooling fan/fans using compressed air because you could damage
them.

Page 18 of 19 HIVE™ User Manual
6.TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
9.4 in (240 mm)
13 in (330 mm)
8.8 in (225 mm)
9.2 lb (4.2 kg)
NOTE: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
167 W
174 W
Operating current
1.4 A
0.7 A
Power linking current (units)
8 A (5 units)
8 A (10 units)
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
3 W
50,000 hours
Color
Quantity
Current
Red
6
730 mA
Green
6
730 mA
Blue
6
730 mA
Photo Optic
Parameter
Coverage angle
44º
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Fan-cooled
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
3, 20
Ordering
Product Name
Item Code
UPC Number
HIVE™
07050687
781462210359

HIVE™ User Manual Page 19 of 19
To return a product or request support:
•In the U.S., contact CHAUVET® World Headquarters (see below).
•In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below).
•In any other country, DO NOT contact CHAUVET®. Contact your distributor. See
www.chauvetlighting.com for distributors outside the U.S., United Kingdom, or
Ireland.
If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of
record and follow their instructions on how to return CHAUVET® product
s to
them. Visit our website for contact details.
Returns
Call the corresponding CHAUVET® Technical
Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product
. Be prepared to
provide the model number, serial number, and a brief description of the
cause for the
return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write
the following information on a piece of paper
and place it inside the box:
•Your name
•Your address
•Your phone number
•RMA number
•A brief description of the problem
Be sure to pack the product
properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. FedEx packing or double-boxing are
recommended.
CHAUVET®
reserves the right to use its own discretion to repair or replace
returned product(s).
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk