Chauvet COLORband PiX User manual

User Manual

Page 2 of 19 COLORband PiX™ User Manual (Rev. 3)
TABLE OF CONTENTS
1. Before You Begin................................................................................3
What Is Included ...........................................................................................3
Unpacking Instructions..................................................................................3
Claims...................................................................................................................3
Text Conventions ..........................................................................................3
Icons.............................................................................................................3
Document Information...................................................................................3
Product at a Glance.......................................................................................4
Safety Notes .................................................................................................4
2. Introduction.........................................................................................5
Product Overview..........................................................................................5
Product Dimensions......................................................................................5
3. Setup...................................................................................................6
AC Power......................................................................................................6
Fuse Replacement.................................................................................................6
Power Linking........................................................................................................7
Mounting.......................................................................................................8
Orientation.............................................................................................................8
Rigging..................................................................................................................8
CBB-6 Instructions.................................................................................................9
4. Operation ..........................................................................................10
Control Panel Operation..............................................................................10
Menu Map...................................................................................................10
Configuration (DMX)....................................................................................11
DMX Personalities and Starting Address..............................................................11
Sectional Control..................................................................................................11
DMX Channel Assignments and Values.......................................................12
7-CH....................................................................................................................12
3-CH....................................................................................................................12
4-CH....................................................................................................................12
6-CH....................................................................................................................13
9-CH....................................................................................................................13
12-CH..................................................................................................................14
18-CH..................................................................................................................14
36-CH..................................................................................................................15
Configuration (Standalone)..........................................................................16
Static Color Mode ................................................................................................16
Automatic Mode...................................................................................................16
Custom Static Color Mode....................................................................................16
Master/Slave Mode..............................................................................................17
5. Technical Information ......................................................................17
Product Maintenance ..................................................................................17
Contact Us..................................................................................................18
Returns.......................................................................................................18
6. Technical Specifications..................................................................19

COLORband PiX™ User Manual (Rev. 3) Page 3 of 19
1.BEFORE YOU BEGIN
What Is
Included
•1 x COLORband PiX™
•1 x Power Cord
•2 x L-Brackets
•1 x Warranty Card
•1 x Quick Reference Guide
Unpacking
Instructions
Immediately upon receipt, carefully unpack the product and check the box to make sure
you have received all the parts indicated above in good condition.
Claims
If the box or contents (the product and included
accessories) appear damaged from
shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not
CHAUVET®.
Failure to do so in a timely manner may invalidate your claim with the
carrier. In addition, keep the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of receiving the
merchandise.
Text
Conventions
Convention Meaning
1~512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Icons
Icon Meaning
Critical installation, configuration, or operation information. Failure
to comply with this information may make the fail to operate,
damage it, or cause harm to the user.
Important installation or configuration information. Failure to
comply with this information could make the product not work
correctly.
Useful information.
Document
Information
The information and specifications contained in this document are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions that may appear in this manual.
CHAUVET® reserves the right to update the
existing document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author
Date
Editor
Date
A. Diaz 6/18/12 S. Graham 6/20/12

Page 4 of 19 COLORband PiX™ User Manual (Rev. 3)
Product at a
Glance
Use on Dimmer

Auto Programs

Outdoor Use

Auto-ranging Power Supply

Sound Activated

Replaceable Fuse

DMX

User Serviceable

Master/Slave

Duty Cycle

Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning or replacing
the fuse.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power cord by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a
safety cable.
•Make sure there are no flammable materials close to the product during operation.
•Do not touch the product’s housing when operating because it may be very hot.
•Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer.
•Make sure to replace the fuse with another of the same type and rating.
•Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
•The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the
product at higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
Keep this User Manual for future consultation. If you sell the product to another user, be
sure that they also receive this document.

COLORband PiX™ User Manual (Rev. 3) Page 5 of 19
2.INTRODUCTION
Product Overview
Product Dimensions
Power In
5-pin DMX Connectors
3-pin DMX Connectors
Sound Sensitivity Knob
Microphone
LED Display
U-Bracket (x2)
Power Out
Bracket Adjustment Knob

Page 6 of 19 COLORband PiX™ User Manual (Rev. 3)
3.SETUP
AC Power
The COLORband PiX™ has an auto-
ranging power supply and it can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect the product to a protected circuit
(circuit breaker or fuse). Make
sure the product has
an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect the product to
a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0% to 100% switch.
Fuse
Replacement Follow the instructions below to change the fuse, if necessary.
Disconnect the product from the power outlet before replacing the fuse.
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same
type and rating.
4. Insert the fuse holder back in place and reconnect power.
The product does not ship with a spare fuse; however, the safety cap has room
for a spare.
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

COLORband PiX™ User Manual (Rev. 3) Page 7 of 19
Power Linking
The product provides power linking via the IEC outlet located in the back of the unit. See
the diagram below.
Power Linking
Diagram
You can power link up to 11 COLORband PiX™ units on 120 VAC or up to 20
COLORband PiX™ units on 230 VAC.
The power-
linking diagram shown above corresponds to the North American
version of the product ONLY! If using the product
in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
1st Product
2nd Product
3rd Product
Other products

Page 8 of 19 COLORband PiX™ User Manual (Rev. 3)
Mounting
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The COLORband PiX™
may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
•Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
•Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight. Please see the Technical Specifications section of
this manual for weight information.
•When mounting the product overhead, always use a safety cable.
Mount the
product securely to a rigging point, whether an elevated platform or a truss.
•When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm hole, which is appropriate for
this purpose.
•When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•The bracket adjustment knobs allow for di
rectional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•The mounting brackets also serve as floor supports/allow for
surface mounting.
When mounting the product on the floor, make sure that the product and cables are
away from people and vehicles.
•The CBB-6 bracket (sold separately) is fully compatible with the
COLORband
PiX™. See following for instructions on usage of the bracket.
Mounting Diagram
Mounting Bracket
Bracket
Adjustment Knob
U-Bracket (x2)
L-Bracket (x2)

COLORband PiX™ User Manual (Rev. 3) Page 9 of 19
CBB-6 Instructions
The CBB-6 works with the COLORband PiX™ Mini (shown below), COLORband PiX™, and most linear/strip lights.
Basic Assembly
To assemble the CBB-6 bracket:
1. Unscrew the bracket adjustment knob on the light you wish to attach to the bracket.
2. Align the light to any of the small mounting holes on the CBB-6 (maximum 6 lights).
3. Reattach the bracket adjustment knob to the light.
4. Repeat up to a total of six times with a pair of CBB-6 brackets.
The final assembly should appear similar to this:
Advanced Assembly Options
The CBB-6 is fully stackable. Use the included screws to attach another CBB-6 to the top
of the bracket for additional rows of lights.
Do NOT connect more than two CBB-6 brackets vertically (for a maximum of 12 strip
lights).
Before mounting the CBB-6 onto any structure, ensure that the structure onto which
you are mounting the product on can support the total weight.
When rigging the product onto truss, you should use a mounting clamp with the
appropriate weight capacity. The CBB-6 bracket has multiple 13 mm holes which are
appropriate for this purpose.
CHAUVET® recommends the CLP-15 heavy-duty clamp (sold separately).

Page 10 of 19 COLORband PiX™ User Manual (Rev. 3)
4.OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview to see the button locations
on the control
panel.
Button
Function
<MENU> Press to find an operation mode or to back out of the current menu
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Menu Map
Mode Programming Steps Description
Static Colors C--
C1 Red
C2 Green
C3 Blue
C4
Cyan
C5 Magenta
C6 Yellow
C7
White
Auto Programs P--
P1 7-Color Switching
P2 7-Color Fading
P3
3-Color Switching
P4
3-Color Fading
P5 Chase Program
P6
7-Color Sound Active
P7
7-Color Sound Active Chase + Strobe
Program Speed S-- S001-S100 Selects auto program speed
Slave Mode
SLA
Sets Slave Mode
Custom Color
Mixing U--
r--
Red
g-- Green
b-- Blue
DMX
Personalities
3-CH
d001-d512 Selects DMX starting address
4-CH
6-CH
7-CH
9-CH
12-CH
18-CH
36-CH

COLORband PiX™ User Manual (Rev. 3) Page 11 of 19
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
DMX
Personalities
and
Starting
Address
The COLORband PiX™ has eight DMX personalities, from a 3-
channel mode for basic
control to a 36-channel mode with more advanced control over the lights.
The COLORband PiX™ uses up to 36 DMX channels in its 36-
channel DMX mode, which
defines the highest configurable address to 477.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you
choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, download the “DMX Primer”
from the
CHAUVET® website.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until 3-CH, 4-CH, 6-CH, 7-CH, 9-CH, 12CH, 18CH, or
36CH shows on the display.
2. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. The display should show d1once you’ve selected your DMX personality using the
steps above.
2. Use <UP> or <DOWN> to select the starting address.
3. Press <ENTER>.
Sectional
Control
The COLORband PiX™ offers by-section control of the lights, and you can select from
two through 12 sections to control. To access this feature
, choose the DMX personality
as shown above. What each DMX personality controls is shown below.
Note: Not all DMX personalities offer sectional control.

Page 12 of 19 COLORband PiX™ User Manual (Rev. 3)
DMX Channel Assignments and Values
7-CH
Channel Function Value Setting
1
Red
000 255
0~100%
2
Green
000 255
0~100%
3
Blue
000

255
0~100%
4 Color Macros
000 015
No function
016 255
Color Macros
5 Speed 000 255
Speed (slow to fast)
(when CH.6 is from 032~233)
Strobe
(CH.1-CH.4 only)
000 015
No function
016 255
0~30 Hz
6 Auto Programs
000 031
No function
032 063
Pulse effect 0~100%
064 095
Pulse effect 100%~0
096 114
Pulse effect 100%~0~100%
115 127
Chase program
128 159
Auto fade transition
160 191
Auto snap transition (3 colors)
192 223
Auto snap transition (7 colors)
224 255
Sound active mode
7
Dimmer
000 255
0~100%
3-CH
Channel Function Value Setting
1
Red
000 255
0~100%
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4-CH
Channel
Function
Value
Setting
1
Red
000 255
0~100%
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4
Dimmer
000 255
0~100%

COLORband PiX™ User Manual (Rev. 3) Page 13 of 19
9-CH
Channel Function Value Setting Section
1
Red
000 255
0~100%
1
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4
Red
000 255
0~100%
2
5
Green
000 255
0~100%
6
Blue
000 255
0~100%
7
Red
000 255
0~100%
3
8
Green
000 255
0~100%
9
Blue
000

255
0~100%
6-CH
Channel Function Value Setting Section
1
Red
000 255
0~100%
1
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4
Red
000 255
0~100%
2
5
Green
000 255
0~100%
6
Blue
000 255
0~100%

Page 14 of 19 COLORband PiX™ User Manual (Rev. 3)
18-CH
Channel
Function
Value
Setting
Section
1
Red
000 255
0~100%
1
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4
Red
000 255
0~100%
2
5
Green
000 255
0~100%
6
Blue
000 255
0~100%
7
Red
000 255
0~100%
3
8
Green
000 255
0~100%
9
Blue
000 255
0~100%
10
Red
000 255
0~100%
4
11
Green
000 255
0~100%
12
Blue
000 255
0~100%
13
Red
000 255
0~100%
5
14
Green
000 255
0~100%
15
Blue
000 255
0~100%
16
Red
000 255
0~100%
6
17
Green
000 255
0~100%
18
Blue
000 255
0~100%
12-CH
Channel Function Value Setting Section
1
Red
000 255
0~100%
1
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4
Red
000 255
0~100%
2
5
Green
000 255
0~100%
6
Blue
000 255
0~100%
7
Red
000 255
0~100%
3
8
Green
000 255
0~100%
9
Blue
000 255
0~100%
10
Red
000 255
0~100%
4
11
Green
000 255
0~100%
12
Blue
000 255
0~100%

COLORband PiX™ User Manual (Rev. 3) Page 15 of 19
36-CH
Channel
Function
Value
Setting
Section
1
Red
000 255
0~100%
1
2
Green
000 255
0~100%
3
Blue
000 255
0~100%
4
Red
000 255
0~100%
2
5
Green
000 255
0~100%
6
Blue
000 255
0~100%
7
Red
000 255
0~100%
3
8
Green
000 255
0~100%
9
Blue
000 255
0~100%
10
Red
000 255
0~100%
4
11
Green
000 255
0~100%
12
Blue
000 255
0~100%
13
Red
000 255
0~100%
5
14
Green
000 255
0~100%
15
Blue
000 255
0~100%
16
Red
000 255
0~100%
6
17
Green
000 255
0~100%
18
Blue
000 255
0~100%
19
Red
000 255
0~100%
7
20
Green
000 255
0~100%
21
Blue
000 255
0~100%
22
Red
000 255
0~100%
8
23
Green
000 255
0~100%
24
Blue
000 255
0~100%
25
Red
000 255
0~100%
9
26
Green
000 255
0~100%
27
Blue
000

255
0~100%
28
Red
000 255
0~100%
10
29
Green
000 255
0~100%
30
Blue
000

255
0~100%
31
Red
000 255
0~100%
11
32
Green
000

255
0~100%
33
Blue
000 255
0~100%
34
Red
000 255
0~100%
12
35
Green
000 255
0~100%
36
Blue
000 255
0~100%

Page 16 of 19 COLORband PiX™ User Manual (Rev. 3)
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (either Static,
Automatic, or Sound) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX
signals that could interfere with the DMX
signals from the controller.
Static Color Mode
To enable the Static Color Mode, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose a color (C1-C7).
4. Press <ENTER>.
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose your auto program (P1-P7).
4. Press <ENTER>.
You can adjust the speed of the automatic program as well.
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN>
to adjust the duration of each step of the automatic program
from S001(slow) to S100 (fast).
4. Press <ENTER>.
Custom Static
Color Mode
To enable the Custom Static Color Mode, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER>.
3. Press <UP> or <DOWN> to choose between colors (r--, g--, b--).
4. Press <ENTER>.
5. Press <UP> or <DOWN> to choose the intensity of the color (000-100).
6. Repeat the steps to mix additional colors to create the color you need.
7. Press <ENTER>.

COLORband PiX™ User Manual (Rev. 3) Page 17 of 19
Master/Slave
Mode
The Master/Slave mode allows a single COLORband PiX™
unit (the “master”) to control
the actions of one or more COLORband PiX™
units (the “slaves”) without the need of a
DMX controller. The master unit will be set to operate in either Automatic or Sound
Active mode, while the slave units will be set to operate in Slave Mode. Once set and
connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until SLA shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to 001.
4. Connect the DMX input of the first slave unit to the DMX output of the master unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound Active mode.
2. Make the master unit the first unit in the DMX daisy chain.
•Configure
all the slave units before connecting the master unit to the DMX
daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller
may interfere with the signals from the
master unit.
•Do not connect more than 31 slave units to the master unit.
5.TECHNICAL INFORMATION
Product
Maintenance
Dust build-
up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life.
To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions are contributing factors to increasing
the cleaning frequency.
To clean the product, follow the instructions below:
•Unplug the product from power.
•Wait until the product is cold.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
•Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
•Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•Softly drag any dirt or grime to the outside of the transparent surface.
•Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.

Page 18 of 19 COLORband PiX™ User Manual (Rev. 3)
In case you need to return a product or request support:
•If you live in the U.S., contact CHAUVET® World Headquarters (see below).
•If you live in the UK or Ireland, contact CHAUVET® Europe Ltd. (see below).
•If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your
distributor of record. Refer to our website for contact details of distributors outside
the U.S., United Kingdom, or Ireland.
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]
Technical Support
Email: [e-mail]
World Wide Web
www.chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of
record and follow their instructions on how to return CHAUVET® product
s to
them. Visit our website for contact details.
Returns
Call the corresponding CHAUVET®
Tech Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be
prepared to
provide the model number, serial number, and a brief description of the cause for the
return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write
the following information on a piece of paper
and place it inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from ina
dequate
packaging will be your responsibility. As a suggestion, proper FedEx packing or double-
boxing are recommended shipping methods.
CHAUVET®
reserves the right to use its own discretion to repair or replace
returned product(s).

COLORband PiX™ User Manual (Rev. 3) Page 19 of 19
6.TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
41.6 in (1,057 mm)
6.1 in (154 mm)
2.5 in (64 mm)
8.9 lbs (4 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
82 W
86 W
Operating
0.7 A
0.4 A
Power linking current (units)
8 A (11 units)
8 A (20 units)
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
3 W
50,000 hours
Color
Quantity
Current
Tri-color
12
350 mA
Photo Optic
Parameter
Strobe Rate
0-30 Hz
Illuminance @ 2 m
1,947 lux
Beam angle
19º
Field angle
35°
Thermal
Maximum External Temp.
Cooling System
104° F (40° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin and 5-pin XLR
Sockets
3, 4, 6, 7, 9, 12, 18, 36
Ordering
Product Name
Item Code
Item Number
COLORband PiX™
03020469
COLORBANDPIX