Chauvet SlimPAR 56 IRC IP User manual

User Manual

Page 2 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
TABLE OF CONTENTS
1. Before You Begin .............................................................................. 3
What Is Included ...............................................................................................3
Unpacking Instructions......................................................................................3
Claims........................................................................................................................ 3
Text Conventions ..............................................................................................3
Icons..................................................................................................................3
Disclaimer .........................................................................................................3
Product at a Glance ..........................................................................................4
Safety Notes......................................................................................................4
2. Introduction ....................................................................................... 5
Product Overview..............................................................................................5
Product Dimensions..........................................................................................6
3. Setup .................................................................................................. 7
AC Power..........................................................................................................7
Power Linking............................................................................................................. 7
Mounting ...........................................................................................................8
Orientation ................................................................................................................. 8
Rigging....................................................................................................................... 8
4. Operation ........................................................................................... 9
Control Panel Operation....................................................................................9
Menu Map .........................................................................................................9
Configuration (DMX) .......................................................................................10
DMX Personalities and Starting Address................................................................ 10
DMX Channel Assignments and Values.........................................................11
3-CH......................................................................................................................... 11
7-CH......................................................................................................................... 11
Configuration (Standalone).............................................................................12
Static Color Mode..................................................................................................... 12
Automatic Mode....................................................................................................... 12
Custom Static Color Mode....................................................................................... 12
Master/Slave Mode.................................................................................................. 13
IRC-6 (Infrared Remote Control) Operation............................................................. 14
5. Technical Information ......................................................................15
Product Maintenance......................................................................................15
6. Technical Specifications..................................................................16
Returns............................................................................................................17
Contact Us ............................................................................................18

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 3 of 18
1.BEFORE YOU BEGIN
What Is
Included
•SlimPAR™ 56 IRC IP
•DMX In Adapter
•DMX Out Adapter
•Power Cord
•Warranty Card
•Quick Reference Guide
Unpacking
Instructions
Immediately upon receipt, carefully unpack the product and check the container to make
sure you have received all the parts indicated above in good condition.
Claims
If the box or contents (the product and
included accessories) appear damaged from
shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not
Chauvet.
Failure to do so in a timely manner may invalidate your claim with the carrier.
In addition, keep the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with Chauvet
within 7 days of receiving the
merchandise.
Text
Conventions
Convention Meaning
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Icons
Icon Meaning
Critical installation, configuration, or operation information. Failure
to comply with this information may render the product partially or
completely inoperative, cause damage to the product, or cause
harm to the user.
Important installation or configuration information. Failure to
comply with this information may prevent the product from
functioning correctly.
Useful information.
Disclaimer
The information and specifications contained in this document are subject to change
without notice. Chauvet
assumes no responsibility or liability for any errors or omissions
that may appear in this manual. Chauvet reserves the right to update the existing
document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Author Date Editor Date
M. Trouard 05/06/15 R. Isenstadt 5/07/15

Page 4 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
Product at a
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
P
Auto-ranging Power Supply
P
Sound Activated
x
Replaceable Fuse
x
DMX
P
User Serviceable
x
Master/Slave
P
Duty Cycle
x
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
•Always connect the product to a GFI (ground fault interrupter) circuit to avoid the
risk of electrocution.
•To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
•Always disconnect the product from the power source before cleaning.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power cord by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a
safety cable.
•Make sure there are no flammable materials close to the product when operating.
•
Do not touch the product’s housing when operating because it may be very hot.
•Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•This product is for indoor or temporary outdoor use (IP65). Do not expose to harsh
or excessively corrosive environmental conditions (whether indoors or outdoors),
including, but not limited to, extreme temperatures, humidity, atmospheric
conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock
and conditions which exceed the product’s Ingress Protection (“IP”) rating. Do not
submerge this product.
•Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
•Never connect the product to a dimmer.
•Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
•The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 5 of 18
2.INTRODUCTION
Product Overview
Power Out
Power In
LED Display
DMX In/Out

Page 6 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
Product Dimensions

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 7 of 18
3.SETUP
AC Power
The SlimPAR™ 56 IRC IP has an auto-
ranging power supply and it can work with an
input voltage range of 100–240 VAC, 50/60 Hz.
To determine the product’s power requirements (
circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
•Always connect the product to a GFI protected circuit
(circuit breaker or fuse).
Make sure the product has
an appropriate electrical ground to avoid the risk of
electrocution or fire.
•To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Never connect the product to
a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Power Linking The product provides a power linking option via the pigtails
located on the back of the
unit.
You can daisy chain up to 49 units on 120 VAC or up to 80 units on 230 VAC.
If you choose not to use the power linking feature, be sure to use the included screw on
cap to prevent any water from getting into the power cords.
The power linking information
above corresponds to the North American version
of the product ONLY! If using the product
in other markets, you must consult with
the local Chauvet
distributor as power linking connectors and requirements may
differ in your country or region.

Page 8 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
Mounting
Before mounting the product
, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The SlimPAR™ 56 IRC IP
may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
•Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
•Make sure that the structure onto which you are mounting the product
can support
the product’s weight. Please see the Technical Specifications
section of this manual
for weight information.
•When mounting the product overhead, always use a safety cable.
Mount the
product securely to a rigging point, whether an elevated platform or a truss.
•When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole
, which is appropriate for
this purpose.
•When power linking multiple products, you must
always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•The bracket adjustment knobs allow for direct
ional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•The double bracket yoke also serves as floor supports. When mounting the product
on the floor, make sure that the product and cables are a
way from people and
vehicles.
•
This product is for indoor or outdoor use (IP65). Do not expose to harsh or
excessively corrosive environmental conditions (whether indoors or outdoors),
including, bu
t not limited to, extreme temperatures, humidity, atmospheric
conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock
and conditions which exceed the product’s Ingress Protection (“IP”) rating. Do not
submerge this product.
Mounting Diagram
Bracket Adjustment Knob
Mounting Bracket

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 9 of 18
4.OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview to see the button locations
on the control
panel.
Button Function
<MENU> Press to find an operation mode or to back out of the current menu
option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Menu Map
Mode Programming Steps Description
DMX
Personalities
and
Addressing
3-CH d001-d512 Selects 3-channel DMX mode (RGB)
7-CH d001-d512 Selects 7-channel DMX mode
Static Colors C--
C1 Red
C2 Green
C3
Blue
C4 Cyan
C5 Magenta
C6 Yellow
C7 White
Auto Programs P--
P1 7 color program (switching)
P2
7 color program (fading)
P3 3 color program (switching)
P4 3 color program (fading)
Auto Program
Speed S-- S__1-S100 Controls program speed for P1-P4
Custom Color
Mixing U--
r-- r000-
100 Custom Static Colors
Combine red, green, and blue
g--
b--

Page 10 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
DMX
Personalities
and Starting
Address
The SlimPAR™ 56 IRC IP has two DMX personalities, a 3-
channel mode for basic control
and a 7-channel mode with more advanced control over the lights.
The SlimPAR™ 56 IRC IP uses up to 7 DMX channels in its 7-
channel DMX mode, which
defines the highest configurable address to 506.
When selecting a starting DMX address, always consider the number of DMX channels
the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, you may refer to the DMX Primer at
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until 3-CH or 7CH shows on the display.
2. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. The display should show d001once you’ve selected your DMX personality using the
steps above.
2. Use <UP> or <DOWN> to select the starting address.
3. Press <ENTER>.

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 11 of 18
DMX Channel Assignments and Values
3-CH
Channel Function Value Setting
1
Red
000 ó255
0–100%
2
Green
000 ó255
0–100%
3
Blue
000 ó255
0–100%
7-CH
Channel Function Value Setting
1
Red
000
ó
255
0–100%
2
Green
000 ó255
0–100%
3
Blue
000 ó255
0–100%
4
Color Macros
(overrides Ch. 1-3)
000 ó015
No function
016 ó255
Color Macros
5
Speed
(when Ch. 6 is within 032–
223)
000 ó255 0–100%
Strobe
000
ó
015
No function
016 ó255
Slow to fast
6 Mode
000 ó031
RGB Mode
032 ó063
Pulse effect 0–100%
064 ó095
Pulse effect 100–0%
096
ó
127
Pulse effect 100–0–100%
128 ó159
Auto fade transition
160 ó191
Auto snap transition (3 colors)
192 ó255
Auto snap transition (7 colors)
7
Dimmer
000 ó255
0–100%

Page 12 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in
standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Static Color Mode
To enable the Static Color Mode, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose a color (C1-C7).
4. Press <ENTER>.
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose your auto program (P1-P4).
4. Press <ENTER>.
You can adjust the speed of the automatic program as well.
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN>
to adjust the duration of each step of the automatic program
from S001(slow) to S100 (fast).
4. Press <ENTER>.
Custom Static
Color Mode
To enable the Custom Static Color Mode:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> to choose between colors (r--, g--, b--).
3. Press <UP> or <DOWN> to choose the intensity of the color (r000-100).
4. Repeat the steps to mix additional colors to create the color you need.
5. Press <ENTER>.

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 13 of 18
Master/Slave
Mode
The Master/Slave mode allows a single SlimPAR™ 56 IRC IP
unit (the “master”) to
control the actions of one or more SlimPAR™ 56 IRC IP
units (the “slaves”) without the
need of a DMX controller. Once set and connected, the slave units will operate in unison
with the master unit.
Slave units:
1. Press <MENU>repeatedly until 3-CH or 7-CH shows on the display. The slave unit
will operate regardless of DMX personality.
2. Press <ENTER> to accept.
3. Set the DMX address to 001.
4. Connect the DMX input of the first slave unit to the DMX output of the master unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in Static Color Mode, Automatic or Custom Static
Color mode.
2. Make the master unit the first unit in the daisy chain.
•Configure all the slave units before connecting the master to the daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller
may interfere with the signals from the
master unit.
•Do not connect more than 31 slave units to the master unit.

Page 14 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
IRC-6 (Infrared Remote Control) Operation
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the
product.
To turn on Automatic Mode:
1. Press <AUTO>on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease the speed of the
program.
Sound-Active Mode (if available)
Sound Active Mode will enable the product to respond to the music.
To turn on Sound Active mode:
1. Press <SOUND>on the IRC-6.
To adjust sound sensitivity in Sound Active mode:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. Press <MANUAL>on the IRC-6.
2. Press any number between <0> –<9> to choose your color.
To manually control the RGB percentage:
1. Press <MANUAL>on the IRC-6.
2. Press <R>, <G>, or <B> to choose your color.
3. Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE>on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To change the switching effect of the program:
Press <FADE> on the IRC-6.
Fade will slowly switch the effect. Snap will rapidly switch the effect.
To black out the lights:
Press <BLACK OUT>on the IRC-6.
This will turn off all the lights until the button is pressed again.
Note: The IRC-6 will not respond to any inputs when Black Out is
activated. If the remote does not respond when a button is pressed,
try pressing <BLACK OUT>. You may have inadvertently activated
<BLACK OUT>.

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 15 of 18
5.TECHNICAL INFORMATION
Product
Maintenance
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life.
To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month.
However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
4. Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the external optics or
glass/transparent surface.
7. Gently polish the external optics and glass/transparent surfaces until they are free
of haze and lint.
Always dry the external optics and glass/transparent
surfaces carefully after
cleaning them.

Page 16 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
6.TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
9.3 in (236 mm)
8 in (203 mm)
3.2 in (82 mm)
4.1 lb (1.9 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
19 W
21 W
Operating
0.2 A
0.1 A
Power linking current (units)
8 A (49 units)
8 A (80 units)
Fuse
N/A
N/A
Power I/O
US/Worldwide
UK/Europe
Power input connector
Proprietary
Proprietary
Power output connector
Proprietary
Proprietary
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Lifespan
LED
50,000 hours
Color
Quantity
Size
Red
36
10 mm
Green
36
10 mm
Blue
36
10 mm
Photometrics
Parameter
Illuminance @ 2 m
876 lux
Beam angle
14º
Field angle
23°
Thermal
Maximum External Temp.
Minimum Startup Temp.
Cooling System
113° F (45° C)
-4° F (-20° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Proprietary
3, 7
Ordering
Product Name
Item Code
UPC Number
SlimPAR™ 56 IRC IP
03030540
781462208882

SlimPAR™ 56 IRC IP User Manual (Rev. 2) Page 17 of 18
In case you need to get support or return a product:
•If you are located in the U.S., contact Chauvet World Headquarters.
•If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
•If you are located in Mexico, contact Chauvet Mexico.
•If you are located in Benelux, contact Chauvet Europe BVBA.
•If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com for distributors outside the U.S.,
UK, Ireland, Mexico, or Benelux.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet
products to them. Visit our website www.chauvetlighting.com for contact details.
Returns
Call the corresponding Chauvet
Tech Support office and request a Return Merchandise
Authorization (RMA) number before shipping the product
. Be prepared to provide the
model number, serial number, and a brief description of the cause for the return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. Chauvet will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write
the following information on a piece of paper
and place it inside the box:
•Your name
•Your address
•Your phone number
•The RMA number
•A brief description of the problem
Be sure to pack the product
properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. As a suggestion, proper UPS packing or double-
boxing is always a safe method to use.
Chauvet
reserves the right to use its own discretion to repair or replace returned
product(s).

Page 18 of 18 SlimPAR™ 56 IRC IP User Manual (Rev. 2)
C
ONTACT
U
S
WORLD HEADQUARTERS - Chauvet
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
Technical Support
Voice: [phone] (Press 4)
Fax: [phone]
Email: tec[email protected]
World Wide Web www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]
Fax: [phone]
Technical Support
Email: ukt[email protected]om
World Wide Web
www.chauvetlighting.co.uk
MEXICO - Chauvet Mexico
General Information
Address: Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: [phone]
Technical Support
Email: servic[email protected]
World Wide Web www.chauvet.com.mx
CHAUVET EUROPE - Chauvet Europe BVBA
General Information
Address:Stokstraat 18
9770 Kruishoutem
Belgium
Voice: [phone]
Technical Support
Email: [e-mail]
World Wide Web www.chauvetlighting.eu
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux
contact your dealer. Follow their
instructions to request support or to return a product. Visit our website for contact details.