Chauvet Laser Wizard CH-505 User manual

World-wide Headquarters:
3000 North 29th Ct., Hollywood
Florida, FL 33020 USA
Tel: [phone] Fax: [phone]
www.ChauvetLighting.com
Laser Wizard
CH-505
User Guide
Please read these instructions carefully befor use

Introduction
Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free
hours with this unit. To assist with the care and use of the product we have prepared this short guide.
Operation
This lighting effect has been designed to function on a DC power supply of 12V and has been supplied with a suitable power
pack for use with your local voltage. Check the label on the unit and the power plug for the correct voltage.
When connected to the mains power supply via the power pack and switched on the unit should illuminate and shoot a 3.9mW
single red laser.
Warning: Do not aim towards eye.
This unit provides three modes of operation accessible via the functions switch (fig. 1). The three modes are as follows:
Sound Activation, Auto Mode and Manual. In the sound and automatic modes, the laser will change through sixteen preset
patterns. In manual mode, the user can select the pattern and rotation speed.
Great with fog.
Installation / Mounting
This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect be properly mounted
using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting.
Cleaning
The most important part of your lighting effect to keep clean is the glass front as this allows the laser output to transmit. This
should be cleaned with a soft damp cloth. The housing of the unit may also be cleaned in the same way. Internal cleaning must
be carried out only by a fully qualified technician.
Maintenance & Servicing
There is no maintenance required. Work on internal parts should be carried out by a qualified technician. Removal of any cov-
ers is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the com-
pany.
.
At Rear
• Power Input
• On / Off Switch
• Auto Speed Adjustment
• Sound Activation Switch
• Manual Speed Adjustment
• Manual Pattern Selection
• Mounting Bracket
• Laser aperature

Troubleshooting
·If the unit is not functional - check main power supply is 'on' and DC jack is secure.
·If the unit is not functional - make sure if in audio mode there is music playing.
If after trying this solution you still have a problem contact your dealer or CHAUVET.
Caution
No user serviceable parts, please refer to CHAUVET for service.
Power Connections
The unit is supplied with a power pack appropriate to its voltage and destination. It is imperative that the correct power pack
suitable for this unit be used at all times. If any other type of supply is provided to this unit then it is likely to render the unit non-
operational.
Caution - Use of controls or adjustments or performance of procedures other than as specified herein may result in
hazardous radiation exposure!
Technical Specifications
Power 120V, 60Hz AC 240V, 50Hz Ac
9 VDC 250 mA 9 VDC 250 mA
Power Pack
1 x 3.9mW Red Laser 1 x 3.9mW Red Laser
Diode Part No. 3.9mW Red Part No. 3.9mW Red
Dimensions 175 x 140 x 104mm/ 6.9 x 5.5 x 4.1in 175 x 140 x 104mm/ 6.9 x 5.5 x 4.1in
Weight 0.58 kg / 1.3 lbs 0.58 kg / 1.3 lbs
User Information (Please complete for your records)
Date Purchased: // Serial No:
Dealer Stamp: Model: CH-505 Laser Wizard

CH-505 Mini Laser
LASER RADIATION
AVOID DIRECT EYE EXPOSERE
CLASS 3R LASER PRODUCT
5.0 mW max CW Diode 532 nm
IEC/EN 60825-1, ed 1.2
Chauvet Lighting
3000 North 29th Ct.
Hollywood, Fl 33020 USA
Manufactured: January,2002
Complies with performance
standards for laser products
with the exception of devia-
tion pursuant to Laser Notice
No. 50, dated July 26, 2001
CAUTION - CLASS 3R
LASER RADIATION WHEN
OPEN AVOID DIRECT EYE
EXPOSURE
CAUTION - CLASS 3R
LASER RADIATION WHEN
OPEN AVOID DIRECT EYE
EXPOSURE