Chauvet Ovation ED-190WW User manual

User Manual

Edition Notes
OVATION™ ED-190WW User Manual Rev. 1
Edition
Notes
The OVATION™ ED-190WW User Manual Rev. 1 covers the description, safety precautions,
installation, programming, operation, and maintenance of the OVATION™ ED-190WW
.
Chauvet released this edition of the OVATION™ ED-190WW User Manual in April 2015.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements are owned or licensed by Chauvet. Any other
product names, logos, brands,
company names, and other trademarks featured or referred to within this document are the
property of their respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its content for any other purpose
without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The OVATION™ ED-190WW User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
4/1/15
A. Leon
4/1/15

Table of Contents
OVATION™ ED-190WW User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan ................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features.......................................................................................................................................................................................3
Lens Tube....................................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Power Linking ...............................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
DMX Linking..................................................................................................................................................................7
DMX Personalities........................................................................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Dimmer Modes.............................................................................................................................................................................7
Mounting.......................................................................................................................................................................8
Orientation ...................................................................................................................................................................................8
Rigging.........................................................................................................................................................................................8

Table of Contents
-ii- OVATION™ ED-190WW User Manual Rev. 1
4. Operation...................................................................................................................................................9
Control Panel Description.............................................................................................................................................9
Control Options.............................................................................................................................................................9
Programming ................................................................................................................................................................9
Menu Map.....................................................................................................................................................................9
Menu Map (Cont.).......................................................................................................................................................10
DMX Values................................................................................................................................................................10
DMX Personality ........................................................................................................................................................................11
DMX Control...............................................................................................................................................................................11
Loss of Signal Setting ................................................................................................................................................................11
Dimmer Control..........................................................................................................................................................................11
Dimmer Menu Control................................................................................................................................................................12
Dimmer Speeds .........................................................................................................................................................................12
Dimmer Curves..........................................................................................................................................................................12
Control Panel Lock.....................................................................................................................................................................12
Passcode...................................................................................................................................................................................12
Menu Access Lock.....................................................................................................................................................................12
Reset..........................................................................................................................................................................................13
Performance Power Output Options ..........................................................................................................................................13
Manual Beam Focus Control......................................................................................................................................................13
Rotating the Barrel Assembly.....................................................................................................................................................13
Master/Slave Mode....................................................................................................................................................................14
Gobo Slot...................................................................................................................................................................................14
Drop-In Iris Slot..........................................................................................................................................................................14
5. Technical Information.............................................................................................................................15
Product Maintenance..................................................................................................................................................15
Cleaning the Reflector Housing Lens.........................................................................................................................................15
6. Technical Specifications.........................................................................................................................16
Returns .......................................................................................................................................................................17
Contact Us...................................................................................................................................................18

Before You Begin
OVATION™ ED-190WW User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•OVATION™ ED-190WW
•Neutrik® powerCON® power cord
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- OVATION™ ED-190WW User Manual Rev. 1
Product At A
Glance
Use on Dimmer
P
Auto Programs
x
Outdoor Use
x
Switchable Power Supply
120 or 230 VAC
P
Master/Slave
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Chauvet certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable.
•Use caution when loosening the barrel rotation knobs. If these knobs become too loose,
the barrel assembly may inadvertently separate from the reflector housing.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-
LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 90,000 to 100,000 hours. If extending this
lifespan is vital, lower the operating temperature by improving the ventilation around the
product and reducing the ambient temperature to an optimal operating range. In addition,
limiting the overall projection intensity may also help to extend the LEDs’ lifespan.

Introduction
OVATION™ ED-190WW User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The OVATION™ ED-190WW ellipsoidal spot is a high-power LED based product that runs when
connected directly to constant power and DMX, or on any dimming power source.
Advanced
onboard electronics automatically detect what type of power and data the product
receives and it
responds accordingly. The OVATION™ ED-
190WW delivers white light with a warm color
temperature and a flat field. It also featur
es standard beam shaping shutters, a gobo/effect slot
and lens barrels that are interchangeable with other ERS products. It performs as well as the
original OVATION™ ED-190WW with the same output and dimming performance.
Features
•Warm white LED ERS-style lighting product
•Operating modes:
•1-channel (UNO): dimmer control
•2-channel (DOS): dimmer and fine dimmer control
•3-channel (STD.P): dimmer, fine dimmer, and strobe control
•Accessory slot for motorized gobo devices and iris unit
•16-bit dimming resolution (DMX mode) for smooth fades
•Flat, even field of light
•Comes with standard pattern slot for glass or steel patterns and soft focus diffuser
•Virtually silent operation for use in any situation
•Works perfectly with industry standard lens tubes
•Simple and complex DMX channel profiles for programming versatility
•3- and 5-pin XLR data input and output connectors
•Works perfectly on conventional dimmers or constant power with DMX
•Auto-senses what kind of system (conventional dimmers or constant power with DMX) and
responds appropriately
•Superior low end dimming whether using dimmers or constant power
•Perfect product for the retrofit market, utilizes existing infrastructure flawlessly
Lens Tube
The following lens tubes are available for purchase.
•19° w/ Gel frame (6.25 in/159 mm accessories)
•26° w/ Gel frame (6.25 in/159 mm accessories)
•36° w/ Gel frame (6.25 in/159 mm accessories)
•50° w/ Gel frame (6.25 in/159 mm accessories)
•15°–30° w/ Gel frame (7.5 in/191 mm accessories)
•25°–50° w/ Gel frame (7.5 in/191 mm accessories)
Do not operate the OVATION™ ED-190WW without a lens tube installed.

Introduction
-4- OVATION™ ED-190WW User Manual Rev. 1
Overview
Beam Focus
Knobs
Side View
powerCON®
Output
powerCON®
Input
Menu Buttons
3- and 5-pin DMX In
3- and 5-pin DMX Out
Fuse Holder
Gel Frame
Holder
Display
Handle
Framing
Shutter (x 4)
Lens Tube
(sold separately)
Barrel
Rotation
Knobs
Barrel
Assembly
Reflector
Housing
Pattern Holder Slot
Drop-
in
Iris Slot
(A-size holder for 3-in patterns
B
-size holder for 2.5-in and 2.75-in
patterns, sold separately)
Rear View
Voltage
Switch

Introduction
OVATION™ ED-190WW User Manual Rev. 1 -5-
Dimensions
6.7 in
171 mm
6.25 in
159 mm
Side View
Top View
6.9 in
174 mm
15 in
380 mm
7.1 in
180 mm
20.9 in
530 mm
8.7 in
222 mm
25.4 in
645 mm
12 in
305 mm

Setup
-6- OVATION™ ED-190WW User Manual Rev. 1
3. SETUP
AC Power
This product has a switchable power supply that can work with an input voltage of
120 VAC, 60 Hz or 230 VAC, 50 Hz.
To determine the power requirements for each
OVATION™ ED-190WW, refer to the label affixed to the product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
http://www.chauvetlighting.com/download/.
•Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
AC Plug
The OVATION™ ED-190WW comes with a power input cord terminated with a Neutrik®
powerCON® A connector on one end and an Edison plug on the other end (U.S. market). If the
power input cord that came with your product has no plug, or if you need to change the Edison
plug, use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Power Linking
The OVATION™ ED-190WW supports power linking. You can power link up to 4 products at
120 V or up to 8 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet
for purchase.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.

Setup
OVATION™ ED-190WW User Manual Rev. 1 -7-
DMX Linking
You can link the OVATION™ ED-190WW to a DMX controller using a 3- or 5-pin DMX
connection. If using other DMX-compatible products with the OVATION™ ED-190WW
, you can
control each individually with a single DMX controller.
DMX
Personalities
The OVATION™ ED-190WW uses a 3- or 5-pin DMX data connection for the 1-, 2- and 3
channel DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the OVATION™ ED-190WW to
work in these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website:
http://www.chauvetlighting.com/download/.
Master/Slave
Connectivity
The Master/Slave mode allows a single OVATION™ ED-190WW (the “master”) to control the
actions of one or more OVATION™ ED-
190WW products (the “slaves”) without the need of a
DMX controller to control the slaves. Once set and connected, the slaves will operate in unison
with the master. For instructions on connecting and configuring this product, see Master/Slave
Mode.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
•The Operation chapter of this manual provides detailed instructions on how to
configure the master and slaves.
•If you are not familiar with or need more information about DMX standards, or the
DMX cables needed to link this product to a DMX controller, download the DMX
Primer from the Chauvet website: http://www.chauvetlighting.com/download/.
Dimmer Modes
The OVATION™ ED-190WW may be plugged into and controlled using a regular dimmer.
•When in SENS mode, advanced onboard electronics automatically detect what type of
power and data the product receives and it responds accordingly. This is the factory default
setting.
•When in DMX mode, the product runs only on constant power and is controlled solely on
DMX. The product will not respond to dimmer control in this mode.
•When in DMMR mode, DMX control is turned off. Intensity is controlled using a dimmer. In
this mode, the product reacts exactly like an incandescent product.
For the best performance while running on dimmers, use the settings listed below:
1. Go to the SET main level.
2. Select the DIMX programming level.
3. Select DIM4.
4. Go back to SET main level.
5. Select the CURV programming level.
6. Select CV3.

Setup
-8- OVATION™ ED-190WW User Manual Rev. 1
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
Procedure
The OVATION™ ED-190WW comes with a hanging/mounting yoke to which you can attach
mounting clamps. The yoke has 13-mm holes, which are appropriate for this purpose. You must
supply your own mounting clamps, so be sure the clamps are capable of supporting the weight
of this product. Use at least one mounting point per product where necessary.
Mounting Diagram
When using only one mounting clamp, be sure to use a clamp with a captive bolt to
prevent accidental loosening.
Overhead Mounting
Bracket
Adjustment
Hand Shank
Hanging/Mounting
Yoke
Safety Cable
Secure the safety
cable using the
passageway on the
top of the product
Alternative Yoke
Attachment
Alternate Short Mounting
Mounting Clamp

Operation
OVATION™ ED-190WW User Manual Rev. 1 -9-
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected
value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric
value when in a function
Control
Options
You can set the starting address of the OVATION™ ED-190WW in the 001–512
DMX range.
This enables control of up to 170 products in the 3-channel STD.P personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level
and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on the
display. Press <ENTER> to select. This will take you to the first programming level for that
option.
•To select an option or value within the current programming level, press <UP> or <DOWN>
until the option shows on the display. Press <ENTER> to select. In this case, if there is
another programming level, you will see that first option, or you will see the selected value.
•Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Main Level
Programming Levels
Description
DIM
D.000–D.100
Local control of output
RUN
DMX
Sets the mode to DMX control
SLAV
Sets the mode to master/slave
DMMR
Sets the mode to dimmer control which turns
off data input.
SENS
Automatically chooses between DMMR and
DMX
ADDR
D.001–D.512
Sets the starting address
SET
KEY
OFF
Sets the key lock (password mode)
ON
DIMX
OFF
No dimmer
DIM1
Slow (DIM4) to fast (DIM1) dimmer speeds.
For best performance while using on a
dimmer, set this to (DIM4).
DIM2
DIM3
DIM4
CURV
OFF
No dimmer
CV1
Large (CV3) to small (CV1) dimmer curves.
For best performance while using on a
dimmer, set this to (CV3).
CV2
CV3

Operation
-10- OVATION™ ED-190WW User Manual Rev. 1
Menu Map (Cont.)
Main Level Programming Levels Description
SET
(Cont.)
PERF
LIVE
Balances LED cooling using fans and output
power level
STDO
Maintains LED cooling by limiting output power
level
POWR
Maintains LED cooling using fans allowing full
power output
SLCK
OFF
SET menu level access lock
ON
PERS
UNO
Selects DMX personality
DOS
STD.P
DERR
BLAK
Blacks out fixture upon loss of DMX
SAVE
Continues with last command upon loss of
DMX control
REST
****
(Enter
Passcode)
REST OK Resets fixture to factory defaults
MCON
SELF
No DMX data is sent in standalone operation
MAST
Sends DMX data to other OVATION™
ED-190WW during standalone operation
DMX Values
UNO
Channel Function Value Percent/Setting
1
Dimmer
000ó255
0–100%
DOS
Channel
Function
Value
Percent/Setting
1
Dimmer
000ó255
0–100%
2
Dimmer Fine
000ó255
0–100%
STD.P
Channel
Function
Value
Percent/Setting
1
Dimmer
000ó255
0–100%
2
Dimmer Fine
000ó255
0–100%
3 Strobe
000ó009
010ó099
100ó109
110ó179
180ó189
190ó255
No function
Strobe (slow to fast)
No function
Lighting effect
No function
Random strobe

Operation
OVATION™ ED-190WW User Manual Rev. 1 -11-
DMX Personality
Set the DMX personality as follows.
1. Go to the SET main level.
2. Select the PERS programming level.
3. Select the desired personality: UNO (1-channel), DOS (2-channel),
or STD.P (3-channel).
•See the DMX Control section for the highest starting address you can select for
each personality.
•Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
DMX Control
DMX Control allows you to assign each product to a unique starting address on the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX Personality.
2. Set the running mode:
3. Go to the RUN main level.
4. Select DMX.
•Note: For information on the SLAV option, see Master/Slave Mode.
5. Set the starting address:
6. Go to the ADDR main level.
7. Select the starting address D.001–D.512.
The highest recommended starting address for each DMX mode is as follows:
DMX
Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address
UNO
512
DOS
511
STD.P
510
Loss of Signal Setting
This setting controls how the product responds when the DMX signal is lost.
1. Go to the SET main level.
2. Select the DERR programming level.
3. Select BLAK to turn off the LEDs when the signal is lost.
4. Select SAVE to use the last command programmed when the signal is lost.
Dimmer Control
The OVATION™ ED-190WW may be plugged into and controlled using a regular
dimmer or by being plugged into constant power and using DMX control.
By default the
product is set to SENS which automatically senses the type of power/control
being used
and sets the product to react accordingly. The product may also be set to DMMR mode
which turns off the DMX control and only allows exclusive control of the product via the
dimmer.
1. Go to the RUN main level.
2. Select the DMMR.
When SENS and DMMR modes are active, the only control panel button that will
work will be the <ENTER> button which will allow you to change modes.

Operation
-12- OVATION™ ED-190WW User Manual Rev. 1
Dimmer Menu
Control
To adjust the light output of the OVATION™ ED-190WW, select the dimmer setting as
follows.
1. Go to the DIM main level.
2. Select the desired dimmer setting D.000–D.100 (0–100% light output).
Dimmer Speeds
Select the dimmer speed of the OVATION™ ED-190WW by selecting the DIMX
programming level.
1. Go to the SET main level.
2. Select the DIMX programming level.
3. Select a dimmer speed DIM1–DIM4 (fast to slow) or OFF (linear output).
When selecting DIM1–DIM4, the output will correspond to the dimmer curve option
selected under the dimmer curves programming level (CURV).
Dimmer Curves
Select the dimmer curve of the OVATION™ ED-190WW by selecting the CURV
programming level. These options simulate the
dimmer curve of an incandescent lighting
product.
1. Go to the SET main level.
2. Select the CURV programming level.
3. Select a dimmer curve CV1–CV3 (small to large) or OFF (linear output).
When selecting DIM1–DIM4, the output will correspond to the dimmer curve option
selected under the dimmer curves programming level (CURV).
Control Panel Lock
This setting enables you to activate or deactivate the control panel lock, which keeps
non-authorized personnel from changing the product’s settings.
1. Go to the KEY main level.
2. Select either ON (activate) or OFF (deactivate).
When the control panel lock is activated, after 30 seconds of control panel inactivity
or after turning on the product, the product will prompt you to enter the passcode.
Passcode
After being prompted to enter the passcode:
•Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
•Note: Asterisks (*) appear on the display when entering the passcode.
Menu Access Lock
This setting enables you to activate or deactivate the menu access lock. Activating the
menu access lock prevents non-
authorized personnel from making any changes to the
programming levels under the SET main level.
1. Go to the SET main level.
2. Go to the SLCK programming level.
3. Select either ON (activate) or OFF (deactivate).
When the menu access lock is activated, in order to access the SET programming
levels, the product will prompt you to enter the passcode.
Enter the passcode as
described in Passcode.

Operation
OVATION™ ED-190WW User Manual Rev. 1 -13-
Reset
To reset the OVATION™ ED-190WW to the factory default settings, follow the instructions
below.
1. Go to the SET main level.
2. Select the REST programming level and then the display becomes blank.
3. Enter the passcode as described in Passcode. After successfully entering the
passcode, REST blinks on the display during the reset process.
4. OK appears on the display when finished.
Performance Power
Output Options
The OVATION™ ED-190WW offers three power output options during the cooling of the
product’s LEDs.
1. Go to the SET main level.
2. Select the PERF programming level.
3. Select from the following options:
•Select LIVE to cool the LEDs by balancing the use of the fan and the power
output level.
•Select STDO to cool the LEDs by maintaining the use of the fan and limiting the
power output level.
•Select POWR to cool the LEDs by maintaining the use of the fan and allowing
full power output.
Manual Beam Focus
Control
The OVATION™ ED-190WW has a manual focus, which is adjusted as follows.
1. Locate the beam focus knobs at the top and bottom of the barrel assembly.
2. Loosen the knobs by turning them counter-clockwise.
3. Slide the lens tube forward or backward until you achieve the desired focus or beam
edge.
4. Tighten the knobs by turning them clockwise, which lock the lens tube’s position.
Rotating the Barrel
Assembly
The OVATION™ ED-190WW allows manual rotation of the barrel assembly, as follows.
1. Locate the barrel rotation knobs at the top and bottom of the reflector housing.
2. Loosen the knobs by turning them counter-clockwise.
•Note: Do not remove the knobs.
3. Rotate the barrel to the desired position, up to 25° in either direction from the centered
position.
4. Tighten the knobs by turning them clockwise, which lock the barrel’s position.
Make sure the barrel assembly is oriented with the pattern holder and drop-in iris
slots at the top of the product.

Operation
-14- OVATION™ ED-190WW User Manual Rev. 1
Master/Slave Mode
The Master/Slave mode allows a single OVATION™ ED-190WW (the “master”) to control
the actions of one or more OVATION™ ED-190WW product
s (the “slaves”) without the
need of a DMX controller to control the slaves. The master will be set to operate in Master
mode (MAST), while the slaves will be set to operate in Slave mode (SLAV
). Once set
and connected, the slaves will operate in unison with the master.
Configure the products as indicated below.
The Slaves:
1. Go to the RUN main level.
2. Select SLAV.
3. Connect the DMX input of the first slave to the DMX output of the master.
4. Connect the DMX input of the subsequent slaves to the DMX output of the previous
slave.
5. Finish setting and connecting all the slaves.
The Master:
1. Go to the SET main level.
2. Select the MCON programming level.
3. Select MAST.
•Note: If you select SELF, no DMX signals are sent to the slaves.
4. Make the master the first product in the DMX daisy chain.
5. Control the master using the DMX controller and the slaves will operate in unison.
Do not connect a DMX controller to the products configured for slave operation.
The DMX controller may interfere with signals from the master.
Gobo Slot
The OVATION™ ED-190WW has a gobo slot, which holds either a standard A or B size
gobo holder (sold separately).
•Insert the gobo holder into the gobo slot.
Drop-In Iris Slot
The OVATION™ ED-190WW has a drop-in iris, which holds either a drop-in iris or a
motorized pattern device (each sold separately).
1. Loosen the thumb screws on the slot cover.
•Note: Do not remove the screws.
2. Slide the cover forward.
3. Insert the gobo holder, iris, or motorized pattern device.
•Note: Make sure the iris handle extends upward from the slot.
4. Slide the cover back. Make sure the iris handle moves freely.
5. Tighten the thumb screws to secure the cover.
Drop-
In Iris/Gobo Slot
Location Diagram
•When not using the iris/gobo slot, replace and secure the slot cover to prevent
light leakage during operation.
•When obtaining any optional iris/gobo accessories, be sure the items are
compatible with the OVATION™ ED-190WW.
Cover Screws
Drop-in Iris
Slot Cover
Sample
Drop-in Iris
Iris Handle
Gobo Slot
Gobo Holder

Technical Information
OVATION™ ED-190WW User Manual Rev. 1 -15-
5. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product frequently.
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces
light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Cleaning the
Reflector Housing
Lens
The lens inside the reflector housing may need periodic cleaning. To gain access to this lens, do
the following.
1. Separate the reflector housing from the barrel assembly by unscrewing the barrel rotation
knobs.
2. Use a Phillips screwdriver to remove the lens from its fixed cover, if necessary.
3. Clean the lens as described in Product Maintenance.
•Take great care not to damage the LEDs and circuit board, which will now be exposed
inside the reflector housing.
•Always close the framing shutters when transporting or storing the product.
To remove the lens tube (sold separately), unscrew the beam focus knobs. Follow any
maintenance and cleaning instructions supplied with the lens tube.
Barrel
Rotation
Knobs
Barrel
Assembly
Reflector
Housing
Beam Focus
Knobs
Lens Tube
(sold separately)
Framing Shutter
(x 4)

Technical Specifications
-16- OVATION™ ED-190WW User Manual Rev. 1
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
(product only)
Length Width Height Weight
21.5 in (545 mm)
15 in (380 mm)
15 in (380 mm)
16.4 lb (7.44 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Voltage Selection
Switchable
120/230 VAC, 50/60 Hz
120 or 230 VAC
Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz
Consumption
208 W
200 W
Current
1.7 A
0.9 A
Power linking current
(products)
8 A (4 products)
8 A (8 products)
Fuse/Breaker
T 3.15 A, 250 V
T 3.15 A, 250 V
Power I/O
U.S./Canada
Worldwide
Power input connector
Neutrik® powerCON® A
Neutrik® powerCON® A
Power output connector
Neutrik® powerCON® B
Neutrik® powerCON® B
Power cord plug
Edison (U.S.)
Local plug
Light Source
Type Power Lifespan
LED
10 W
100,000 hours
Color Quantity Current
Warm White
19
2.8 A
Photometrics
Parameter 19°
Lens 26° Lens 36° Lens 50° Lens 15°–30° Lens 25°–50° Lens
Illuminance @ 5 m
4,380
lx
2,743
lx
1,578
lx
624
lx
8,810
lx
2,351
lx
3,616
lx
1,090
lx
Lumens
5,274
6,025
6,322
6,349
N/A
N/A
N/A
N/A
Beam angle
16°
22°
31°
48°
14°
28°
18°
30°
Field angle
22°
28°
36°
56°
15°
29°
25°
48°
Thermal
Max. External Temperature Cooling System
113 °F (45 °C)
Fan-Assisted Convection
DMX
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
1, 2 or 3
Ordering
Product Name
Item Code
UPC Number
OVATION™ ED-190WW
01120960
781462213084