Chauvet ROGUE RH1 Hybrid User manual

User Manual

Edition Notes
Rogue™ RH1 Hybrid User Manual Rev. 1
Edition
Notes
The Rogue™ RH1 Hybrid User Manual Rev. 1 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Rogue™ RH1 Hybrid. Chauvet
released this edition of the Rogue™ RH1 Hybrid User Manual in March 2015.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other
product names, logos, brands, company names, and other trademarks featured or referred to
within this document are the property of their respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its content for any
other purpose without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Rogue™ RH1 Hybrid User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
3/5/15
A. Leon
3/5/15

Table of Contents
Rogue™ RH1 Hybrid User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin ...................................................................................................................................... 1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
2. Introduction ............................................................................................................................................... 3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup .......................................................................................................................................................... 6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
DMX Linking..................................................................................................................................................................6
DMX Personalities........................................................................................................................................................................6
Gobo Wheel..................................................................................................................................................................7
Gobo Wheel 1..............................................................................................................................................................................7
Gobo Wheel 2..............................................................................................................................................................................7
Gobo Replacement......................................................................................................................................................................8
Color Wheel..................................................................................................................................................................9
Lamp Replacement.....................................................................................................................................................10
Procedure ..................................................................................................................................................................................10
Procedure (Cont.).......................................................................................................................................................................11
Increasing the Lamp’s Life.........................................................................................................................................................11
Mounting.....................................................................................................................................................................12
Orientation .................................................................................................................................................................................12
Rigging.......................................................................................................................................................................................12
Procedure ..................................................................................................................................................................................12
4. Operation ................................................................................................................................................. 13
Control Panel Description...........................................................................................................................................13
Control Options..........................................................................................................................................................................13
Programming..............................................................................................................................................................................13
Menu Map...................................................................................................................................................................14
Menu Map (Cont.).......................................................................................................................................................15
Menu Map (Cont.).......................................................................................................................................................16
Address.......................................................................................................................................................................17
Set the DMX Address................................................................................................................................................................17
Run Mode ...................................................................................................................................................................17
DMX Personality ........................................................................................................................................................................17
Auto Test....................................................................................................................................................................................17
Manual Test...............................................................................................................................................................................17
Setup...........................................................................................................................................................................18
Pan Reverse..............................................................................................................................................................................18
Tilt Reverse................................................................................................................................................................................18
Screen Reverse .........................................................................................................................................................................18
Pan Angle ..................................................................................................................................................................................18

Table of Contents
-ii- Rogue™ RH1 Hybrid User Manual Rev. 1
Tilt Angle....................................................................................................................................................................................18
Pan and Tilt Movement BlackOut...............................................................................................................................................18
Color Movement BlackOut.........................................................................................................................................................18
Gobo Movement BlackOut.........................................................................................................................................................18
Lamp Settings............................................................................................................................................................................19
Maintenance Timer ....................................................................................................................................................................20
Reset Function...........................................................................................................................................................................20
Factory Reset Function..............................................................................................................................................................20
System Information.....................................................................................................................................................21
Offset Mode ................................................................................................................................................................21
Pan.............................................................................................................................................................................................21
Tilt..............................................................................................................................................................................................21
Dimmer ......................................................................................................................................................................................21
Gobo..........................................................................................................................................................................................21
Color ..........................................................................................................................................................................................21
Prism..........................................................................................................................................................................................21
Rotating Prism............................................................................................................................................................................21
Zoom..........................................................................................................................................................................................21
Focus.........................................................................................................................................................................................21
Frost...........................................................................................................................................................................................21
DMX Values................................................................................................................................................................22
DMX Values (Cont.)....................................................................................................................................................23
DMX Values (Cont.)....................................................................................................................................................24
DMX Values (Cont.)....................................................................................................................................................25
DMX Values (Cont.)....................................................................................................................................................26
DMX Values (Cont.)....................................................................................................................................................27
DMX Values (Cont.)....................................................................................................................................................28
DMX Values (Cont.)....................................................................................................................................................29
DMX Values (Cont.)....................................................................................................................................................30
5. Technical Information ............................................................................................................................. 31
Product Maintenance..................................................................................................................................................31
6. Technical Specifications ......................................................................................................................... 32
Returns .......................................................................................................................................................................33
Contact Us ................................................................................................................................................... 34

Before You Begin
Rogue™ RH1 Hybrid User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•Rogue™ RH1 Hybrid
•Neutrik® powerCON® power cord
•2 Omega brackets with mounting hardware
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- Rogue™ RH1 Hybrid User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-Ranging Power
Supply
P
Master/Slave
x
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Chauvet certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•This product weighs 55.2 lb (25.1 kg). Always ask for help when mounting this product to
avoid personal injuries or damage to the product.
•Make sure there are no flammable materials close to this product while it is operating.
•Always carry this product by the handles. Do not carry from the head.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage to the housing, lenses, ultraviolet filter, or
cables. Have the damaged parts replaced by an authorized technician at once.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•Do not aim this product toward the Sun. The lenses could concentrate the solar energy and
cause internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.

Introduction
Rogue™ RH1 Hybrid User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The Rogue™ RH1 Hybrid is a compact, electronic, moving yoke beam product equipped with a
330 watt X8 lamp that delivers an ultra-
intense output of 111,000 lux@ 15m with tight beam
angles of 1-4.5° in Beam Mode and 5-
19° in Spot Mode. This hybrid beam and spot includes an
optical system with 8-facet and 6-facet prism sets that are completely layerable and cont
rollable.
This product comes with an indexing and a static scrolling gobo wheel, along with a 13-
hue color
wheel.
Features
•Osram Sirius lamp, 330 W X8, 8000 K, 1,500 hours life expectancy
•3- and 5-pin DMX input/output connections
•Fast, smooth, and precise pan and tilt operation
•111,000 lux at 15 m in beam mode
•Omega mounting bracket, fits all Rogue™, Next™, and Legend™ fixtures
•Two prisms, 6-facet and 8-facet, independently controllable for amazing gobo effects
•Two gobo wheels, 1 rotating and 1 static wheel for dynamic projection images
•2.5° to 8° zoom in beam mode, 5° to 19° zoom in spot mode for variable beam size options
•Quiet operation for use in any situation
•Precision optics for crisp, even gobo projections
•Variable frost for wash-style effects
•Fast, precise pan and tilt movement
•Color wheel:
•13 colors + Open (white)
•CTO - Split/linear colors
•Rainbow color spin at variable speed
•Gobo wheel 1:
•13 gobos + Open
•Gobo wheel spin at variable speed
•Gobo wheel 2:
•9 gobos (9 glass) + Open
•Rotating, interchangeable, indexing, slot-n-lock
•Gobo wheel spin at variable speed
•DMX channels: 20 or 25
•Pan: 540°
•Tilt: 260°
•Neutrik® powerCON® power input

Introduction
-4- Rogue™ RH1 Hybrid User Manual Rev. 1
Overview
Front View
Rear View
Top View
Side View
Control
Panel
Tilt Lock
Fuse
Pan Lock
Power
Switch
Power In
DMX In
Mounting Plate
¼-turn Head
Access Screws
Handle
DMX Out

Introduction
Rogue™ RH1 Hybrid User Manual Rev. 1 -5-
Dimensions
16.11 in
409 mm
12.89 in
327 mm
14.63 in
371 mm
9.54 in
242 mm
14.63 in
371 mm
4.53 in
115 mm
9.54 in
242 mm
20.40 in
518mm
13.58 in
345 mm
4.53 in
115 mm
13.58 in
345 mm
25.11 in
638 mm
8.83 in
224 mm

Setup
-6- Rogue™ RH1 Hybrid User Manual Rev. 1
3. SETUP
AC Power
Each Rogue™ RH1 Hybrid has an auto-ranging power supply that works with an input voltage
range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each
Rogue™ RH1 Hybrid
, refer to the label affixed to the product. You can also refer to the
Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Rogue™ RH1 Hybrid comes with a power input cord terminated with a Neutrik®
powerCON® A connector on one end and an Edison plug on the other end (U.S. market). If the
power input cord that came with your product has no plug, or if you need to change the
Edison
plug, use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating
(T 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
DMX Linking
You can link the Rogue™ RH1 Hybrid to a DMX controller using a 3- or 5-pin DMX connection.
If using other DMX-compatible products with the Rogue™ RH1 Hybrid
, you can control each
individually with a single DMX controller.
DMX
Personalities
The Rogue™ RH1 Hybrid uses a 3- or 5-pin DMX data connection for the 20- and 25-channel
DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the Rogue™ RH1 Hybrid to work in
these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website:
www.chauvetlighting.com/download/pro.

Setup
Rogue™ RH1 Hybrid User Manual Rev. 1 -7-
Gobo Wheel
The Rogue™ RH1 Hybrid includes two gobo wheels: 13 fixed gobos plus open on wheel 1 and
9 rotating gobos plus open on wheel 2. The diagram shows the gobo number on the wheel, as
numbered in the DMX Values tables.
Gobo Wheel 1
The gobos on gobo wheel 1 are not removable.
Gobo Wheel 2
1
2
3
4
5
8
6
7
13
Open
12
9
11
10
Spot
Aperture
1
2
3
4
8
7
6
5
9
15.6 mm
14.44 mm
Gobo Dimensions
Gobo Wheel 2

Setup
-8- Rogue™ RH1 Hybrid User Manual Rev. 1
Gobo
Replacement
The gobos in the Rogue™ RH1 Hybrid gobo wheel 2 are removable from their gobo holders.
This operation is quite simple, although it requires the technician to be careful and to follow the
recommended procedure.
•Make sure to disconnect the product’s power cord before replacing a gobo
•Always replace a gobo with a gobo of the same dimensions.
•When inserting a glass gobo, always make sure that the shiny side of the gobo
(glass base) faces the lamp. This provides a layer of protection against the high
temperature from the lamp.
Procedure
1. Turn the product off and disconnect it from the power outlet.
2. Open the head cover by loosening the 4 Phillips-head ¼-turn screws on the sides of the top
cover.
3. Separate the gobo holder away from the gobo wheel by pushing it toward the front of the
moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo
holder.
4. Extract the gobo holder by pulling it outward (direction 2 in the diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the
gobo from the gobo holder.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel.
8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If
correctly installed, the gobo holder should easily slide itself into the gobo wheel slot.
Gobo Replacement
Diagrams
Gobo Holder
Glare Shield
Gobo
Retaining Spring
Gobo Holder
Gobo Wheel 2

Setup
Rogue™ RH1 Hybrid User Manual Rev. 1 -9-
Color Wheel
The Rogue™ RH1 Hybrid includes one color wheel with 13 fixed colors plus open (white), as
indicated below. The diagram shows the color number on the wheel, as numbered in the
DMX Values tables.
Open
(White)
1
2
3
6
5
4
7
Orange
8
9
12
11
10
13
Red
Cyan
5600k
3200k
Blue
Dark
Yellow
Dark
Blue
Light
Green
Light
Yellow
Green
Magenta
UV

Setup
-10- Rogue™ RH1 Hybrid User Manual Rev. 1
Lamp
Replacement
The Rogue™ RH1 Hybrid is equipped with an Osram Sirius 330W X8 lamp. Follow the
procedure below to safely change the lamp.
Disconnect the product from power before opening.
Procedure
1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the lamp to
cool down.
2. Remove back cover using the 2 Phillips-head ¼-turn screws on the rear panel of the head.
3. Orient the product so that the lamp power wires are coming from the lower right corner as
you are looking at the rear head.
Spring Clip

Setup
Rogue™ RH1 Hybrid User Manual Rev. 1 -11-
Procedure
(Cont.)
4. Take note as to the orientation of the lamp. Vent holes on the front of the lamp should align
horizontally with the air vents on the lamp frame. This is extremely important for lamp cooling
when replacing the lamp. (see step 5 for location of vents on the lamp) Using the lamp base,
push the lamp down against the spring clips and then roll the lamp out the top.
5. Remove the 2 wires connected to the lamp by the spade connectors.
6. Reverse the steps 5 through 1 above to install the new lamp. Do not touch the glass with
bare hands.
RISK OF LAMP EXPLOSION! Vent holes on the front of the lamp should align horizontally
with the air vents on the lamp frame. This is extremely important for lamp cooling
Do not turn product on without a lamp!
Increasing the
Lamp’s Life
•Vent holes on the front of the lamp should align horizontally with the air vents on the
lamp frame. This is extremely important for lamp cooling.
•ALWAYS turn the lamp off by using the DMX controller or the product’s control panel,
then wait at least 5 minutes before switching off the product. This will keep the fans
running to extract any remaining heat from the product’s head.
•DO NOT power cycle the product unless it is necessary.
•DO NOT re-strike the lamp immediately after turning it off. Chauvet recommends
waiting 5 minutes before trying to re-strike the lamp.
•
DO NOT touch the lamp without wearing gloves to avoid leaving grease on the bulb or
on the contacts that could reduce the lamp’s life.
•
ALWAYS change the lamp when it has reached its recommended lifespan to avoid the
risk of lamp explosion.
Lamp Cooling
Vents
Lamp Vents
Spade Connectors

Setup
-12- Rogue™ RH1 Hybrid User Manual Rev. 1
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•The product is not intended for permanent installation.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
Procedure
The Rogue™ RH1 Hybrid comes with a preinstalled mounting surface to which you will be able
to attach the 2 included omega brackets. Make sure the clamps are capable of supporting the
weight of this product. Use two mounting points per product. In addition, use a safety cable to
link the product to the structure. For our CHAUVET® Professional
line of mounting clamps, go
to http://trusst.com/products/.
Mounting Diagram
Floor Mounting
Overhead Mounting
Safety
Cable
Omega
Bracket

Operation
Rogue™ RH1 Hybrid User Manual Rev. 1 -13-
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the Rogue™ RH1 Hybrid starting address in the 001–512 DMX range. This enables
control of up to 20 products in the 25-channel 25CH personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level
and a variable number of programming levels for each option.
•To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
•To highlight a menu option or to change a setting, press <UP> or <DOWN>.
•To change menu levels as shown in the Menu Map, press <ENTER> or <MENU>. This is
equivalent to moving right and left of the Menu Map, respectively.
•To accept the current or new value, press <ENTER>.
•To return to the previous menu without making changes, press <MENU>.
•To exit programming mode, press <MENU> until you see one of the main level options, the
opening screen, or do not press any button for 30 seconds and the screen will automatically
revert to the opening screen.

Operation
-14- Rogue™ RH1 Hybrid User Manual Rev. 1
Menu Map
Main Level Programming Levels Description
Address
001–512
Sets the DMX starting address
Run Mode
DMX
20CH
Selects the DMX mode
25CH
Auto Test
Runs the product’s test sequence
Manual Test
Pan
000–255 Allows manual control of all settings from the
control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color
Gobo2
Gobo
Gobo Rot
Focus
Focus Fine
Zoom
Zoom Fine
Prism1
Prism1 Rot
Prism2
Prism2 Rot
Frost1
Frost2
P/T Macro
P/T Ma.Speed
Special
Function

Operation
Rogue™ RH1 Hybrid User Manual Rev. 1 -15-
Menu Map (Cont.)
Main Level Programming Levels Description
Setup
Pan Reverse
YES
Reverse pan operation
NO
Normal pan operation
Tilt Reverse
YES
Reverse tilt operation
NO
Normal tilt operation
Screen Reverse
YES
Rotates control screen view 180°
NO
Normal control screen view
Pan Angle
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
Tilt Angle
270
Selects the 270° tilt angle range
180
Selects the 180° tilt angle range
90
Selects the 90° tilt angle range
BL.O.P/T Move
YES
Defines the pan/tilt move-in-black delay
NO
BL.O.ColorMove
YES
Defines the color change move-in-black delay
NO
BL.O.GoboMove
YES
Defines the gobo change move-in-black delay
NO
Lamp Settings
On/Off
ON
Turns lamp on/off
OFF
State/Power
on
ON
Defines the status of lamp when powering up
product
OFF
Off Via Dmx
YES
Turns off the unit via DMX controller
NO
On If Dmx On
YES
Turns lamp on when DMX signal is detected
NO
Off If Dmx Off
YES
Turns lamp off when DMX signal is lost
NO
Ignition Delay 000–255
Selects duration of delay between product
power on and lamp power on
Low Power
Delay
000–255
Selects the duration of delay when shutter is
closed and lamp enters lower power state
Reset Lamp
Time
YES
Resets lamp timer to 0
NO
Leaves lamp time unchanged

Operation
-16- Rogue™ RH1 Hybrid User Manual Rev. 1
Menu Map (Cont.)
Main Level Programming Levels Description
Setup
(Cont.)
Maintenance
Timer
Interval
10–250
Defines amount of hours between maintenance
Remaining
Time
NO
Shows amount of time remaining in
maintenance cycle
RESET
Resets the time back to the beginning
Reset Function
Pan/Tilt
YES
Resets pan/tilt functions to the home position
NO
Shutter/
Prism
YES
Resets all shutter/prism functions to the home
position
NO
Color
YES
Resets all color functions to the home position
NO
Gobo
YES
Resets all gobo functions to the home position
NO
Zoom/
Frost/
Focus
YES
Resets the zoom, frost, and focus functions to
the home position
NO
All
YES
Resets all functions to the home position
NO
Factory Settings
YES
Reverts the product back to the original factory
settings
NO
Sys Info
Ver:
Displays the software version
Running Mode:
Displays the current running mode
Dmx Address:
Displays the current DMX address
Temperature:
Displays the product’s temperature in Celsius
Lamp On Time:
Displays the amount of time the lamp has been
on (provided the counter has been reset upon
installation of new lamp)
Remain Time:
Shows amount of time remaining in
maintenance cycle