Checkpoint TE250X User manual

CHECK POINT
TE100X/TE250X/ TE1000X/TE2000X
THREAT EMULATION PRIVATE CLOUD
APPLIANCES
Quick Start Guide

POWER UP YOUR CHECK POINT
TE100X/TE250X/TE1000X/TE2000X APPLIANCE
CONNECT YOUR PC FOR
INITIAL SETUP
• Connect the power cable to the power port on the TE100X/TE250X/TE1000X/
TE2000X appliance rear panel and plug it into a power outlet.
• Turn the power on.
• Initial setup must be done from a PC connected to the appliance’s MGMT
interface via the included Ethernet cable. After completing the initial
connection, the First Time Configuration Wizard will guide you through the
process of configuring the appliance.
• Before continuing, make sure your PC is configured correctly.
1
2

FOR WINDOWS 7 AND WINDOWS VISTA
OPERATING SYSTEMS
FOR WINDOWS XP OPERATING SYSTEMS
• Click
> Control Panel > Network and Internet
> Network and Sharing Center
> Manage network connections.
• Right-click Local Area Connection,
and then click Properties. If you are
prompted for an administrator password
or confirmation, type the password or
provide confirmation.
• Click the Networking tab.
Under This connection uses the following
items, click Internet Protocol Version 4
(TCP/IPv4), and then click Properties.
• In the IP address field, enter 192.168.1.2.
• In the Subnet mask field, enter 255.255.255.0.
• Leave the Default gateway and DNS settings fields empty.
• Click OK and close the dialog boxes.
Figure 1
Internet Protocol (TCP/IP) Properties
Figure 2
Internet Protocol (TCP/IP) Properties
• Click
> Settings > Control Panel
> Network Connections.
• Double-click Local Area Connection.
• In the General tab, click Properties.
• In the IP address field, enter 192.168.1.2.
• In the Subnet mask field, enter
255.255.255.0.
• Leave the Default gateway and DNS
settings fields empty.
• Click OK and close the dialog boxes.
3

CONFIGURE YOUR TE100X/TE250X/TE1000X/
TE2000X APPLIANCE
Figure 3
TE100X/TE250X/TE1000X/TE2000X Appliance
Login Page
Figure 4: First Time Configuration
Wizard – Welcome Page
Figure 5: First Time Configuration
Wizard – Summary Page
• Launch the Web browser and type
https://192.168.1.1 in the address
bar.
Note – A certificate error will be
shown upon login. This is due to the
fact that default certificate is self-
signed. Select the option that allows
you to continue to the website.
Click Continue to this Web site.
• Log in with the default system
administrator login name/
password,
admin/admin, and click Login.
For additional information regarding setting up your appliance, refer to the
Check Point TE100X/TE250X or TE1000X/ TE2000X Appliances Getting
Started Guide.
Note – Popups must always be allowed on https://<appliance_ip_address>.
• After logging in for the first time and changing the default login name and
password, the First Time Configuration Wizard will begin automatically.
• The wizard will guide you through the connection setup process.
Fill in the parameters as required and click Finish.
4

REGISTRATION AND TECHNICAL SUPPORT
Appliance Registration
TE100X/TE250X/TE1000X/TE2000X appliances require a license to be installed
prior to operation.
To license and register your appliance, please visit:
http://register.checkpoint.com/cpapp
If you are evaluating TE100X/TE250X/TE1000X/TE2000X appliances, you will
have access to a 15-day evaluation license key.
Appliance User Center
For further information about the TE100X/TE250X/TE1000X/TE2000X
appliances, see:
https://usercenter.checkpoint.com/usercenter/login/cpapp.
For technical assistance, contact Check Point 24 hours a day,
seven days a week at:
[phone] (Americas)
[phone] (International)
5

P/N: 706475
WWW.CHECKPOINT.COM
Check Point, the Check Point logo and Smart-1 are trademarks or registered trademarks of
Check Point Software Technologies Ltd. or its affiliates. All other product names mentioned herein
are trademarks or registered trademarks of their respective owners. The products described in
this document are protected by U.S. Patent No. 5,606,668, 5,835,726, 6,496,935, 6,873,988, and
6,850,943 and may be protected by other U.S. Patents, foreign patents, or pending applications.
©2015 Check Point Software Technologies Ltd. All rights reserved.
CHECK POINT
TE100X/TE250X/TE1000X/ TE2000X
THREAT EMULATION PRIVATE CLOUD
APPLIANCES
Quick Start Guide